Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Hardwood. Requires final sanding & finishing. 16" measurement is at widest point. Finial style may vary.
Item #: 23755
Condition:
New
Price: $50.00
Description: Hardwood. Requires final sanding & finishing. 16" measurement is at widest point. Finial style may vary.
Item #: 29697
Condition:
New
Price: $50.00
Description: From a small hoard of #2, #77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. They...More Details »
Item #: 32028
Condition:
New
Price: $2.00
Description: Cast bob for New Haven mantel clocks. 1-1/2" diameter x 2" long. 2.6 ozs.
⚠️ WARNING: Contains chemicals that may cause cancer, birth defects, or reproductive harm for more information go to www.P65warnings.ca.gov.
Item #: 23760
Condition:
New
Price: $7.00
Description: Used on Hermle #340-020, but can be used in other applications. 6.0mm OD x 3.2mm ID x 0.3mm thick wave washer. 10 pack. Original Hermle factory replacement.
Item #: 24536
Condition:
New
Price: $5.50
Description: 1" long with 3/8" long #8-32 machine screw thread on one end which goes into a tapped hole. #8 wood screw thread on the other goes into wood. Unfinished steel. 2 pieces per pack.
Item #: 29535
Condition:
New
Price: $2.50
Description: 140-pieces. 20 pcs. each of 7 different sizes between 1"- 1-1/4" or 25.4 to 32mm. Made in Germany
Item #: 31051
Condition:
New
Price: $29.50
Description: 100 piece assortment. 20 pieces each of 5 different sizes (India):
- .197" L x .020" tapering to .012"
- .236" L x .0275" tapering to .020"
- .354" L x .035" tapering to .0225"
- .472" L x .047" tapering to .0315"
- .472" L x .059" tapering to .039"
Item #: 10502
Condition:
New
Price: $10.50
Description: 100 piece assortment. 20 pieces each of 5 different sizes (India):
- .197" L x .020" tapering to .012"
- .236" L x .0275" tapering to .020"
- .354" L x .035" tapering to .0225"
- .472" L x .047" tapering to .0315"
- .472" L x .059" tapering to .039"
Item #: 10501
Condition:
New
Price: $10.50
Description: Bob wires with rating nuts. In lengths:
2", 2-5/8", 3-1/4", and 4-1/4".
Item #: 30477
Condition:
New
Price: $7.50
Description: Fits 5/16" rod for quartz applications. 2-3/4" Diameter. Brass plated.
Item #: 29537
Condition:
New
Price: $3.00
Description: 7/16" outside diameter x 3/16 inch inside diameter x 1/4" thick. With a groove 1/16" wide x 1/16" deep.
Item #: 23495
Condition:
New
Price: $0.50
Description: Fits 5/16" rod for quartz applications. 3-1/2" Diameter. Brass plated.
Item #: 29538
Condition:
New
Price: $3.25
Description: Various sizes (3 3/4" to 11"), styles (plain, trademark, and calendar), and colors (white and ivory). 50 pieces per assortment-no choice of content.
Item #: 23723
Condition:
New
Price: $13.00
Description: Outside diameter measures 7-13/16". 7-1/4" time track. With arabic numbers.
Item #: 29150
Condition:
New
Price: $7.00
Description: Outside diameter measures 6". Time track is 5-1/2". With roman numbers.
Item #: 29152
Condition:
New
Price: $6.00
Description: Outside diameter measures 6". 5-1/2" time track. With arabic numbers.
Item #: 29148
Condition:
New
Price: $6.00
Description: 4-1/2 Dia (115mm). 3/4" rear slot. Brushed Brass finish. Fits many German & American clocks. Made in Asia. This bob has a depth of 1.05" or 14.5mm.
Item #: 29795
Condition:
New
Price: $16.25
Description: Outside diameter measures 4-1/2". 4-1/8" time track. With arabic numbers.
Item #: 29147
Condition:
New
Price: $4.50
Description: Outside diameter measures 4-1/2". Time track is 4-1/8". Fancy gold center with arabic numbers.
Item #: 29137
Condition:
New
Price: $4.50
Description: An expanding beam sets with slide rule accuracy. Sharp pivot point and 5 interchangeable blades & 3 pencil tips (included). Draw or cut circles up to 11-1/2" diameter. Works on paper, card, plastic, thin wood sheets and cloth. Taiwan
Item #: 17737
Condition:
New
Price: $11.00
Description: Antique finish. Embossed white Roman dial measures 4-1/2" across. Embossed brass center and surround. Embossed brass hinged bezel with an OD of 5-3/4". 3/8" diameter center hole. Winding holes can...More Details »
Item #: 23697
Condition:
New
Price: $24.00
Description: Bright finish. Embossed white Roman dial measures 4-1/2" across. Embossed brass center and surround. Embossed brass hinged bezel with an OD of 5-3/4". 3/8" diameter center hole. Winding holes can...More Details »
Item #: 23696
Condition:
New
Price: $24.00
Description: 7-7/8” Roman. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29418
Condition:
New
Price: $52.50
Description: 7-7/8” Arabic. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29417
Condition:
New
Price: $52.50
Description: 6-1/4” Roman. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29416
Condition:
New
Price: $46.50
Description: 6-1/4” Arabic. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29415
Condition:
New
Price: $46.50
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 6-1/2” with Convex Glass.
Item #: 29612
Condition:
New
Price: $26.50
Description: 5-1/8” Roman. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29414
Condition:
New
Price: $44.50
Description: 5-1/8” Arabic. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29413
Condition:
New
Price: $44.50
Description: 3-7/8” Roman. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29412
Condition:
New
Price: $40.00
Description: 3-7/8” Arabic. These differ from the above in that they are not hinged and must be mounted directly on the case. Dimensions shown are outside diameters (edge to edge). Made in Taiwan.
Item #: 29411
Condition:
New
Price: $40.00
Description: Black rubber. Durometer reading of 70. 3-1/2" OD x 1/8" thick. Rubber drive O ring.
Item #: 24676
Condition:
New
Price: $2.50
Description: 4-3/4 long 3mm threaded, flat end steel or brass rod with a brass finished nut. Made in China.
Item #: 29310
Condition:
New
Price: $4.00
Description: Plain polished brass plated bobs for wood rods. 3/4" Rear Slot. 5-1/8 Dia. (130mm).
Fits many German & American clocks. Made in Asia.
Item #: 29405
Condition:
New
Price: $19.00
Description: 5-1/2" Dia (140mm). 1" rear slot. Brushed Brass finish. Fits many German & American clocks. Made in Asia.
Item #: 29796
Condition:
New
Price: $20.00
Description: Brass ladder chain is made in the USA. 39 links per foot x 72" long. Made of 1.20mm diameter wire.
Item #: 32117
Condition:
New
Price: $15.50
as low as: $15.25
2 or more
Description: 6 of each. Longer than #10581 at 3-1/4" long with clicks that have a different head configuration. India.
Item #: 30495
Condition:
New
Price: $6.00
Description: Nickel plated click 1/2" long.
Item #: 29750
Condition:
New
Price: $2.00
Description: Click spring for carriage clocks. 15mm.
Item #: 29746
Condition:
New
Price: $6.00
Description: Nickel plated. 5/8 long. For small clocks.
Item #: 29714
Condition:
New
Price: $1.75
Description: Unfinished hand carved wood cuckoo clock deer antlers measure 3" long from the center of the mounting post to the tip. Made in Germany.
Item #: 23765
Condition:
New
Price: $15.50
Description: Brown plastic cuckoo clock deer antlers measure 4" long from the center of the mounting post to the tip.
Item #: 29172
Condition:
New
Price: $7.00
Description: Unfinished hand carved wood cuckoo clock deer antlers measure 5 1/4" long from the center of the mounting post to the tip. Made in Germany.
Item #: 23766
Condition:
New
Price: $29.50
Description: Bellow lift wire can be bent to fit. 4" long.
Item #: 23520
Condition:
New
Price: $0.75
Description: Approximately 4-1/2 inches long. Bellow lift wire can be bent to fit. 4 pieces per pack.
Item #: 14979
Condition:
New
Price: $1.50
Description: Approximately 2-3/8" long straight steel wire used for cuckoo bellows and other applications. 6-pc. pack.
Item #: 15227
Condition:
New
Price: $1.50
Description: 5 sizes included: 80mm 3-1/8", 90mm 3-1/2", 100mm 4", 110mm 4-5/16", 120mm 4-3/4" For hanging cuckoo pendulums.
Item #: 13198
Condition:
New
Price: $4.00
Description: Black Rubber. Durometer reading of 70A. 5-1/2" OD x 1/8" thick. Rubber drive O ring.
Item #: 24677
Condition:
New
Price: $5.00
Description: Black rubber. Durometer reading of 70A. 2-1/4" OD x 1/8" thick. Rubber drive O ring.
Item #: 24674
Condition:
New
Price: $1.50
Description: Black rubber. Durometer reading of 70A. 1-1/4" OD x 1/8" thick. Rubber drive O ring.
Item #: 24673
Condition:
New
Price: $1.00
Description: Use to affix doors to cuckoo clock housing. 12-pc. pack
Item #: 15960
Condition:
New
Price: $1.50
Description: Plastic dark amber deer eyes sold in pairs. 8mm Diameter.
Item #: 24715
Condition:
New
Price: $2.75
Description: Plastic dark amber deer eyes sold in pairs. 5mm Diameter.
Item #: 24712
Condition:
New
Price: $2.50
Description: Plastic dark amber deer eyes sold in pairs. 4mm Diameter.
Item #: 24711
Condition:
New
Price: $2.25
Description: Plastic dark amber deer eyes sold in pairs. 10mm Diameter.
Item #: 24717
Condition:
New
Price: $3.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group