Timesavers - New Parts
Browse New Parts Products
NEW!
Description: 4mm thread diameter x 10-1/16" long steel rod. Threaded on both ends.
Item #: 90324
Condition:
New
Price: $3.50
NEW!
Description: 10mm (.394”) diameter head. 8.5mm (.335”) long body. 3mm diameter wood screw affixed.
Item #: 90034
Condition:
New
Price: $3.00
NEW!
Description: 8mm (.315”) diameter head. 10mm (.394”) long body. 3.5mm internally threaded. Does not include mounting screw.
Item #: 90022
Condition:
New
Price: $2.00
NEW!
Description: Steel brad is 1 long x #17 size 144 pieces per pack.
Item #: 34200
Condition:
New
Price: $2.00
NEW!
Description: Internally threaded to fit 4mm center rod.
Item #: 90290
Condition:
New
Price: $1.50
Description: Used on Junghans Swinger movements but can be used on other movements. 24.5mm approximate width.
Item #: 32910
Condition:
New
Price: $7.00
Description: 2 tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A more economical alternative to the Swiss variety with 22-teeth. China.
Item #: 34190
Condition:
New
Price: $51.50
Description: Replace worn or damaged governor & still keep the same tune in your customer's clock. Tooth count indicates the number of teeth on the comb. New style unit may have to be filed to fit your...More Details »
Item #: 34191
Condition:
New
Price: $12.00
Description: Brass fork used on Hettich electric torsion clocks. 1.3mm Mounting Hole. 16.0mm from center of mounting hole to end. 19.0mm overall length. Germany. Regularly $8.00/ each. While supplies last.
Item #: 33718
Condition:
New
Price: $3.00
Description: To clean, surface finish & debur metal surfaces. Tapered center hole to fit polishing motor spindle. India.
Item #: 33705
Condition:
New
Price: $6.50
Description: White plastic. Minute hand measures 1-11/16” (43mm approx) from approx. center of minute hand mounting location to tip. Fits 90mm (3-1/2”) dials. No mounting holes in hour or minute hand allows for custom fitting.
Item #: 33760
Condition:
New
Price: $1.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33737
Condition:
New
Price: $3.25
Description: To clean, surface finish & debur metal surfaces. Tapered center hole to fit polishing motor spindle. India.
Item #: 33707
Condition:
New
Price: $7.00
Description: White plastic. Minute hand measures 1-7/8” (47.5mm approx) from center of 2.25mm square hole mounting bushing to tip. Fits 100mm (4”) dials. No mounting hole in hour hand.
Item #: 33762
Condition:
New
Price: $1.75
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33738
Condition:
New
Price: $4.00
Description: Cast pot metal, brass plated. For floor & wall clocks & other fine furniture. Made in China. 5-1/8" L x 7/8" W
Item #: 33725
Condition:
New
Price: $4.50
Description: To clean & polish to brighter finish. Tapered center hole to fit polishing motor spindle. India.
Item #: 33706
Condition:
New
Price: $6.50
Description: White plastic. Minute hand measures 2-1/4” (57mm approx) from center of 2.50mm square hole mounting bushing to tip. Fits 120mm (4-3/4”) dials. No mounting hole in hour hand.
Item #: 33763
Condition:
New
Price: $1.75
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Measures 15/16" W x 1-9/16" L (24mm x 40mm). China.
Item #: 33745
Condition:
New
Price: $3.25
Description: To clean & polish to brighter finish. Tapered center hole to fit polishing motor spindle. India.
Item #: 33708
Condition:
New
Price: $7.00
Description: Creme colored plastic. Minute hand measures 2-1/4” (57mm approx) from center to tip. Fits 120mm (4-3/4”) dials. No mounting holes in hour or minute hands.
Item #: 33764
Condition:
New
Price: $1.75
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Measures 1-1/16" W x 2" L (27mm x 50mm). China.
Item #: 33744
Condition:
New
Price: $3.50
Description: 9/32” long oblong mounting holes make these multi-use handles. 2-5/8” & 3-1/2” overall length. Each has a set screw for easy tightening with included hex key. India.
Item #: 33709
Condition:
New
Price: $10.00
Description: White plastic. No mounting holes allow custom fitting. Minute hand measures 3-1/8” (80mm approx) from center of to tip. Fits 160mm (6-1/4”) dials.
Item #: 33765
Condition:
New
Price: $2.25
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Measures 1-5/16" W x 2-5/16" L (34mm x 60mm). China.
Item #: 33743
Condition:
New
Price: $3.75
Description: 1-7/8" D x 2-15/16" T approx. Brass finish. Length shown does not include mounting screw which is affixed. India.
Item #: 33711
Condition:
New
Price: $13.50
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Measures 1-7/16" W x 2-3/4" L (37mm x 70mm). China.
Item #: 33742
Condition:
New
Price: $4.00
Description: 5-1/8” L x 7/8” W. Cast zinc with brass plating. For floor & wall clocks & other fine furniture. China.
Item #: 33726
Condition:
New
Price: $5.50
Description: 8-steel rod chime unit with a cast iron vertical base for Westminster movements. Longest rod is 26".
Item #: 33750
Condition:
New
Price: $46.00
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/32" long hand shaft. Max dial thickness of 1/8". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33769
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: 32mm x 150mm (1-1/8" x 6"). Polished silver finished aluminum. With center rod, top hook, and bottom nib. China.
Item #: 33722
Condition:
New
Price: $6.00
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/32" long hand shaft. Max dial thickness of 3/16". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33889
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: Replacement center shaft fits the KWM bushing tool. Shaft has the recess slot for the snap ring and long vertical slot just like the original.39" (10mm) OD x 7" (180mm) long.
Item #: 33701
Condition:
New
Price: $39.50
Description: Narrow door lock is ideal for grandfather clocks. Fits left or right
hand door. Nickel finish. 13/16 inches wide x 2-3/4 inches tall x 5/16" deep. With brass plated key. NOTE: Key style may vary. See No. 23928 for gun metal finished lock.
Item #: 33749
Condition:
New
Price: $9.50
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/16" long hand shaft. Max dial thickness of 1/4". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33770
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: Old style 10 ft. gold rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Item #: 33752
Condition:
New
Price: $23.75
Description: Brass plated steel clock chain is 72" in length, has 38 links per foot and is made of 1.60mm wire.
Item #: 33747
Condition:
New
Price: $12.00
as low as: $11.75
2 or more
Description: White plastic. Bushed 7/8" long minute hand as measured from center of mounting hole to tip. Fits 50mm dial.
Item #: 33753
Condition:
New
Price: $1.25
Description: Brass plated steel clock chain is 72" in length, has 40.5 links per foot and is made of 1.40mm wire.
Item #: 33746
Condition:
New
Price: $12.50
as low as: $12.25
2 or more
Description: White plastic. Minute hand measures 1-7/8” (47.5mm approx) from center of 2.25mm square hole mounting bushing to tip. Mounting hole in hour hand allows custom fitting. Fits 100mm (4") dials.
Item #: 33754
Condition:
New
Price: $1.75
Description: Brass plated steel clock chain is 72" in length, has 39 links per foot and is made of 1.80mm wire.
Item #: 33748
Condition:
New
Price: $13.00
as low as: $12.75
2 or more
Description: White plastic. Minute hand measures 2-1/4” (57mm approx) from center of 2.50mm square hole mounting bushing to tip. Fits 120mm dials.
Item #: 33755
Condition:
New
Price: $1.75
Description: 2-7/8" long. 1-1/8" shaft length. 1-5/16" head diameter. 5/16" flange length. Fits #33741 lock & others. .2385" outside shaft diameter , 0.15" inside shaft diameter
Item #: 33727
Condition:
New
Price: $4.00
Description: White plastic. Minute hand measures 3-5/16” (79.5mm approx) from center of 2.50mm square hole mounting bushing to tip. Fits 170mm/180mm (6-3/4”/7”) dials.
Item #: 33757
Condition:
New
Price: $2.25
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33735
Condition:
New
Price: $3.00
Description: 13mm hand shaft (1/2"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/8". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Requires standard push-on...More Details »
Item #: 33875
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: Mainwheel clickspring used in Seth Thomas #2 movements. 31.5mm.
Item #: 33714
Condition:
New
Price: $4.75
Description: White plastic. Minute hand measures 3-5/16” (79.5mm approx) from center of 2.50mm square hole mounting bushing to tip. Fits 170mm/180mm (6-3/4”/7”) dials. No mounting hole in hour hand allows custom fitting.
Item #: 33758
Condition:
New
Price: $2.25
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33734
Condition:
New
Price: $4.00
Description: 23mm hand shaft (29/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/2". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Requires standard...More Details »
Item #: 33877
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: White plastic. Minute hand measures 1-3/8” (35mm approx) from approx. center of minute hand mounting location to tip. Fits 75mm (3”) dials. No mounting holes in hour or minute hand allows for custom fitting.
Item #: 33759
Condition:
New
Price: $1.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33736
Condition:
New
Price: $3.00
Description: 17mm hand shaft (21/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/4". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Requires standard...More Details »
Item #: 33876
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: White 21-foot roll. 1.0mm thick. Use on American weight clocks, OG’s & others. 80# test. India.
Item #: 34189
Condition:
New
Price: $3.50
Description: 3-piece pack of temperature compensating springs from Horolovar (USA). .0040" thick (.102mm) x 7-3/16" long.
Item #: 34188
Condition:
New
Price: $6.00
as low as: $5.75
3 or more
Description: Useful instructions on how the power reserve indicator works. The calculating method can apply to chronograph minute and hour indicating mechanisms as well. 16-page illustrated booklet. Published 2020.
Item #: 34187
Condition:
New
Price: $8.50
Description: Brass. 34.0mm OD x 1.2mm thick with 3.5mm mounting hole.
Item #: 34184
Condition:
New
Price: $32.00
Description: 2.50mm rod diameter. 7-3/8” & 7-7/8” overall length rods including 6.5mm diameter slotted brass end fittings. Can cut as desired. India.
Item #: 34183
Condition:
New
Price: $5.50
Description: Red aluminum. 3/4” from center of 4.4mm (.173”) mounting hole to tip. Used on quartz alarm movements accommodating push-on hands.
Item #: 34182
Condition:
New
Price: $0.50
Description: Fits most quartz movements requiring push-on hands. Hour hand mounting hole is 5.0mm and minute hand mounting hole is 3.15mm. 1-1/16" long from center of minute hand mounting hole to tip.
Item #: 34180
Condition:
New
Price: $1.50
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group