5-9/16" minute hand as measured from center of mounting hole to tip. Minute hand has a 3.6mm square mounting hole across flats dimension. Hour hand has a 5.0mm mounting hole. Regularly $3.00. While...
Description: 5-9/16" minute hand as measured from center of mounting hole to tip. Minute hand has a 3.6mm square mounting hole across flats dimension. Hour hand has a 5.0mm mounting hole. Regularly $3.00. While supplies last.
Item #: 02717
Condition: New
Price: $0.50
Westminster Chime Unit 5-RodNew
This 5-rod Westminster chime unit was poorly tuned during manufacture. The cast iron base measures 2" wide x 1" deep x 3-3/16" tall and is certainly usable. The 2.8mm diameter copper rods may be us...
Description: This 5-rod Westminster chime unit was poorly tuned during manufacture. The cast iron base measures 2" wide x 1" deep x 3-3/16" tall and is certainly usable. The 2.8mm diameter copper rods may be...More Details »
Item #: 02712
Condition: New
Price: $6.00
Bim-Bam Chime UnitNew
This 3-rod Bim-Bam chime unit was poorly tuned during manufacture. The cast iron base measures 2-1/4" wide x 3-1/4" deep x 3-3/16" tall and is certainly usable. The 2.8mm diameter copper rods may b...
Description: This 3-rod Bim-Bam chime unit was poorly tuned during manufacture. The cast iron base measures 2-1/4" wide x 3-1/4" deep x 3-3/16" tall and is certainly usable. The 2.8mm diameter copper rods may...More Details »
Item #: 02713
Condition: New
Price: $6.00
Synchron Bottom Set 1-3/8" Type C MotorNew
2-1/4" x 3-1/4" x 2" deep with a 1-3/8" long hand shaft. Hands are not included. Manufactured in the USA by Hansen. Regularly $52.00. While supplies last.
Description:
2-1/4" x 3-1/4" x 2" deep with a 1-3/8" long hand shaft. Hands are not included. Manufactured in the USA by Hansen. Regularly $52.00. While supplies last.
Item #: 02715
Condition: New
Price: $35.00
#16 Flat Profile HSS GraverNew
Good quality tempered high speed steel (HSS). 4" long. Used for cutting all types of metals, wood, bone, etc. by jewelers & watchmakers. Profile is 2.4mm tapering to 1.2mm. Regularly $9.00. While s...
Description: Good quality tempered high speed steel (HSS). 4" long. Used for cutting all types of metals, wood, bone, etc. by jewelers & watchmakers. Profile is 2.4mm tapering to 1.2mm. Regularly $9.00. While supplies last.
Item #: 02716
Condition: New
Price: $5.00
40mm Milled Brass Roman Numeral SetNew
40mm (approximately 1.575") tall Roman numerals in a full set. May require final polishing. Regularly $27.50. While supplies last.
Description: 40mm (approximately 1.575") tall Roman numerals in a full set. May require final polishing. Regularly $27.50. While supplies last.
Item #: 02711
Condition: New
Price: $13.75
5-1/2" (140mm) Polished Brass Bob - Thin ProfileNew
Plain brass plated bobs for wood rods were produced incorrectly. They should have a higher convex backing to accommodate oval wood rods, but were manufactured with a slimmer convex backing. Therefo...
Description: Plain brass plated bobs for wood rods were produced incorrectly. They should have a higher convex backing to accommodate oval wood rods, but were manufactured with a slimmer convex backing....More Details »
Item #: 02709
Condition: New
Price: $8.00
1" Regulator Pulley With Narrow GrooveNew
Brass. .045" wide groove will accommodate 1/32" (.03125") cable or cord. Standard for most regulators is 1/16" (.0625") wide. Regularly $7.50. While supplies last.
Description: Brass. .045" wide groove will accommodate 1/32" (.03125") cable or cord. Standard for most regulators is 1/16" (.0625") wide. Regularly $7.50. While supplies last.
Item #: 02710
Condition: New
Price: $2.50
Steel MandrelNew
.095" diameter x 1.785" long. India. Regularly $1.50. While supplies last.
Description: New, old stock. #0-80 internal thread. .157” height x .274” OD. Nickeled brass. Regularly $3.00. While supplies last.
Item #: 02673
Condition: New
Price: $1.00
Baby Ben & Big Ben Switch KnobNew
New, old stock. Fits Baby Ben #61-L, 61-N & 61-R, Bachelor #S4-C & S5, Big Ben Chime Alarm #69 & #69C, Big Ben Chime Electric #S4D, and Big Ben Loud Alarm #48-D, 48-E & 48-G. #0-80 internal thread....
Description: New, old stock. Fits Baby Ben #61-L, 61-N & 61-R, Bachelor #S4-C & S5, Big Ben Chime Alarm #69 & #69C, Big Ben Chime Electric #S4D, and Big Ben Loud Alarm #48-D, 48-E & 48-G. #0-80 internal thread....More Details »
Item #: 02674
Condition: New
Price: $1.00
Big Ben Chime Bridge ScrewNew
New, old stock. Fits S4D-E (S1). #5-40 x 5/32” slotted pan head steel machine screw. Regularly $1.50. While supplies last.
Description: New, old stock. Brass. .366” head OD with 20 teeth. .248” overall height x .135” ID. .231 shaft diameter. Regularly $6.00. While supplies last.
Item #: 02677
Condition: New
Price: $2.00
Big Ben #66 (48G) Trip WheelNew
New, old stock. .933” steel toothed wheel with brass arbor bushing. .165” overall height. Regularly $7.50. While supplies last.
Description: New, old stock. Also fits Bingo. .933” brass toothed wheel with mounting arbor. .422” overall height. Regularly $7.50. While supplies last.
Item #: 02679
Condition: New
Price: $2.50
Westclox Winding Key for Pickwick ModelNew
New, old stock. Brass. #2-64 external thread. 1/16” shaft length. Regularly $2.00. While supplies last.
Description: New, old stock. Regularly $25.00. While supplies last.
Item #: 02668
Condition: New
Price: $12.50
Westclox Model M2D CoilNew
New, old stock. 110 volts, 60 cycles. Fits Ardmore Model S5E, Bachelor Model S5A, Country Clock Models S5k-S5K-1, Dunbar, Logan, Manor Model S5B, Pittsfield Model S5G and Troy. Regularly $16.00. Wh...
Description: New, old stock. 110 volts, 60 cycles. Fits Ardmore Model S5E, Bachelor Model S5A, Country Clock Models S5k-S5K-1, Dunbar, Logan, Manor Model S5B, Pittsfield Model S5G and Troy. Regularly $16.00. While supplies last.
Item #: 02650
Condition: New
Price: $8.00
Westclox Model M2F CoilNew
New, old stock. 110 volts, 60 cycles. Regularly $16.00. While supplies last.
Description: New, old stock. 110 volts, 60 cycles. Regularly $16.00. While supplies last.
Item #: 02651
Condition: New
Price: $8.00
Westclox Model M3 CoilNew
New, old stock. 110 volts, 60 cycles. Fits Baby Ben Electric S6, Big Ben Electris S6B, Big Ben Electric S6D, and Orackle S6E. Regularly $16.00. While supplies last.
Description: New, old stock. 110 volts, 60 cycles. Fits Baby Ben Electric S6, Big Ben Electris S6B, Big Ben Electric S6D, and Orackle S6E. Regularly $16.00. While supplies last.
Item #: 02652
Condition: New
Price: $8.00
Big Ben Clock of Tomorrow Hour WheelNew
New, old stock. .730” wheel diameter x .475” long. Regularly $4.00. While supplies last.
Description: New, old stock. .730” wheel diameter x .475” long. Regularly $4.00. While supplies last.
Item #: 02655
Condition: New
Price: $1.00
Plastic Bezel Pin Retainer 2-Piece PackNew
Used on Hermle bezels with hinges requiring pins, but can use on other clocks. M5 external thread. 3mm internal hole for pins. 13.8mm overall length. 2 pieces/pack. Regularly $1.00. While supplies ...
Description: Used on Hermle bezels with hinges requiring pins, but can use on other clocks. M5 external thread. 3mm internal hole for pins. 13.8mm overall length. 2 pieces/pack. Regularly $1.00. While supplies last.
Item #: 02640
Condition: New
Price: $0.50
M1.6 Brass Hex Nut 10-Piece PackNew
Internal 1.6mm thread. 5.5mm across flats. 1.6mm thick. 10 pieces/pack. Regularly $2.00. While supplies last.
Description: Internal 1.6mm thread. 5.5mm across flats. 1.6mm thick. 10 pieces/pack. Regularly $2.00. While supplies last.
Item #: 02638
Condition: New
Price: $1.00
Cream Plastic Cuckoo Hands to Fit 60mm DialNew
Specialty bushed hands. Minute hand measures 1-1/8” (approx. 29mm) from center of .120” (approx. 3.0mm) diameter mounting hole to tip. It has a .120” (approx. 3.0mm) mounting hole. Hour hand...
Description: Specialty bushed hands. Minute hand measures 1-1/8” (approx. 29mm) from center of .120” (approx. 3.0mm) diameter mounting hole to tip. It has a .120” (approx. 3.0mm) mounting hole. Hour hand...More Details »
Item #: 02633
Condition: New
Price: $0.75
White (Chromed) Watch Crowns - Tap #6 96-Piece PackNew
96 pieces per pack. Tap #6 (1.30mm). 1.80mm mounting tube diameter. 6.70mm diameter head. 1.20mm overall height (head + mounting tube). Made in Switzerland. Regularly $36.00. While supplies last.
Description: 96 pieces per pack. Tap #6 (1.30mm). 1.80mm mounting tube diameter. 6.70mm diameter head. 1.20mm overall height (head + mounting tube). Made in Switzerland. Regularly $36.00. While supplies last.
Item #: 02632
Condition: New
Price: $12.00
4-1/2" (115mm) Polished Brass Bob - 3/4" Rear SlotNew
Plain polished brass plated bob for wood rods were were produced incorrectly. They should have a higher convex backing to accommodate wood rods, but were manufactured with a slimmer convex backing....
Description: Plain polished brass plated bob for wood rods were were produced incorrectly. They should have a higher convex backing to accommodate wood rods, but were manufactured with a slimmer convex backing....More Details »
Item #: 02629
Condition: New
Price: $6.00
#2-56 x 3/16" Slotted Flat Head Brass Machine Screw - 12 packNew
Brass. 12 pieces per pack. Regularly $6.00. While supplies last.
Description: Brass. 5mm wide. Split hook end. Without a threaded end. Regularly $2.50. While supplies last.
Item #: 90239
Condition: New
Price: $1.25
2-1/16" Blackened Speaker Grill For Quartz MovementsNew
Used on some Hermle cases but can use on others. 2-1/16” diameter x 1/16” thick black oxided steel cover with 3 mounting holes .098” diameter. Regularly $3.00. While supplies last.
Description: Used on some Hermle cases but can use on others. 2-1/16” diameter x 1/16” thick black oxided steel cover with 3 mounting holes .098” diameter. Regularly $3.00. While supplies last.
Item #: 90259
Condition: New
Price: $1.50
Schatz 50 Strike WheelNew
Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing right). Regularly $25.00. While supplies last.
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing left). Regularly $25.00. While supplies last.
Item #: 02619
Condition: New
Price: $8.00
Hermle Regulator GlassNew
9” overall height x 6-15/16” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle #70687 case, but can use on others. Regularly $7.50. While supplies last.
Description: 9” overall height x 6-15/16” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle #70687 case, but can use on others. Regularly $7.50. While supplies last.
Item #: 90132
Condition: New
Price: $3.75
Hermle Regulator GlassNew
8-7/8” overall height x 5-5/8” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle school house clocks, but can use on others. Regularly $7.50. While sup...
Description: 8-7/8” overall height x 5-5/8” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle school house clocks, but can use on others. Regularly $7.50. While supplies last.
Item #: 90133
Condition: New
Price: $3.75
Hermle Steeple Bracket Clock GlassNew
6-3/16 height x 7” wide x .090” thick glass. Screened with a beautifully etched scrolled design. Pendulum opening is 3” tall x 4-13/16” width. Used on Hermle clocks, but can use on others. ...
Description: 6-3/16 height x 7” wide x .090” thick glass. Screened with a beautifully etched scrolled design. Pendulum opening is 3” tall x 4-13/16” width. Used on Hermle clocks, but can use on others. Regularly $13.50. While supplies last.
Item #: 90134
Condition: New
Price: $6.25
Hermle Steeple Clock GlassNew
9-5/8” overall height x 7” wide x .090” thick glass. Straight sides are 3-9/16” long. Not screened. Used on Hermle steeple clocks but can use on others. Regularly $6.00. while supplies last.
Description: 9-5/8” overall height x 7” wide x .090” thick glass. Straight sides are 3-9/16” long. Not screened. Used on Hermle steeple clocks but can use on others. Regularly $6.00. while supplies last.
Item #: 90135
Condition: New
Price: $3.00
3-Piece Set Weight Shell Bodies OnlyNew
No end caps, center rods, top hooks or bottom nibs. Set of 3 pieces with polished brass finish on stainless steel. 9-1/8” overall length x 46.5mm (1.831") OD.
Description: No end caps, center rods, top hooks or bottom nibs. Set of 3 pieces with polished brass finish on stainless steel. 9-1/8” overall length x 46.5mm (1.831") OD.
1-1/4” minute hand as measured from center of .115” x .135” oblong mounting hole to tip. 7/8” long hour hand as measured from center of .192” round mounting hole to tip. While supplies la...
Description: 1-1/4” minute hand as measured from center of .115” x .135” oblong mounting hole to tip. 7/8” long hour hand as measured from center of .192” round mounting hole to tip. While supplies last. Regularly $3.00 pair.
Item #: 02614
Condition: New
Price: $1.00
Hermle Offset Mounting Foot for Center WheelNew
13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. More severe bend than #90196. Nickeled steel. For center wheel. Regularly $2.00. While supplies last.
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. More severe bend than #90196. Nickeled steel. For center wheel. Regularly $2.00. While supplies last.