Timesavers - Clearance Items
Overstocks & special purchases of parts, tools, gifts, etc.
Browse Clearance Items Products
Description: Brass. 5mm wide. Split hook end. Without a threaded end. Regularly $2.50. While supplies last.
Item #: 90239
Condition:
New
Price: $1.25
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing right). Regularly $25.00. While supplies last.
Item #: 02618
Condition:
New
Price: $8.00
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing left). Regularly $25.00. While supplies last.
Item #: 02619
Condition:
New
Price: $8.00
Description: 9” overall height x 6-15/16” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle #70687 case, but can use on others. Regularly $7.50. While supplies last.
Item #: 90132
Condition:
New
Price: $3.75
Description: 8-7/8” overall height x 5-5/8” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle school house clocks, but can use on others. Regularly $7.50. While supplies last.
Item #: 90133
Condition:
New
Price: $3.75
Description: 6-3/16 height x 7” wide x .090” thick glass. Screened with a beautifully etched scrolled design. Pendulum opening is 3” tall x 4-13/16” width. Used on Hermle clocks, but can use on others. Regularly $13.50. While supplies last.
Item #: 90134
Condition:
New
Price: $6.25
Description: 9-5/8” overall height x 7” wide x .090” thick glass. Straight sides are 3-9/16” long. Not screened. Used on Hermle steeple clocks but can use on others. Regularly $6.00. while supplies last.
Item #: 90135
Condition:
New
Price: $3.00
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. More severe bend than #90196. Nickeled steel. For center wheel. Regularly $2.00. While supplies last.
Item #: 02615
Condition:
New
Price: $0.50
Description: 19mm (3/4”) head diameter. 2.5mm (.094") head thickness. 6.65mm (.262") shaft diameter x 5.3mm (.209") shaft length. 4-piece pull comes with 2 plastic washers and an M4 mounting screw. Used on...More Details »
Item #: 90029
Condition:
New
Price: $2.00
Description: No end caps, center rods, top hooks or bottom nibs. Set of 3 pieces with polished brass finish on stainless steel. 9-1/8” overall length x 46.5mm (1.831") OD.
Item #: 02613
Condition:
New
Price: $16.00
Description: 1-1/4” minute hand as measured from center of .115” x .135” oblong mounting hole to tip. 7/8” long hour hand as measured from center of .192” round mounting hole to tip. While supplies last. Regularly $3.00 pair.
Item #: 02614
Condition:
New
Price: $1.00
Description: #4-40 tungsten steel die is 13/16" diameter. Regularly $9.00. While supplies last.
Item #: 175721
Condition:
New
Price: $4.50
Description: 2-3/16” x 9-7/16” (55mm x 240mm). Fits 60mm x 245mm & longer weight shells. Internally threaded for 5mm top hook & bottom nib, not included. Regularly $35.00. While supplies last.
Item #: 90320
Condition:
New
Price: $17.50
Description: 1-5/8” x 9-5/8” (42mm x 244mm). Fits 48mm x 245mm & longer weight shells. Internally threaded for 5mm top hook & bottom nib, not included. No center rod required as it is not thru drilled for a...More Details »
Item #: 90346
Condition:
New
Price: $16.00
Description: Weathered gray dial printed on 20-7/8” heavy vinyl stock. Adhesive backed. 2” second bit diameter with 1-5/8” time track. 10” time track. Hermle logo. Regularly $9.00. While supplies last.
Item #: 90345
Condition:
New
Price: $4.50
Description: Beautiful satin nickel finish on dial & bezel. 10-5/16” time track with 9.75mm center hole. 1-5/8” 2nd bit time track with 5.5mm center hole. 9.25mm diameter winding arbor holes on 5-11/16”...More Details »
Item #: 90047
Condition:
New
Price: $60.00
Description: 280mm x 395mm (11” wide x 15-9/16” tall) overall. Raised brass & gold center & corners with mottled brass background. 9-5/16” time track. Raised gold numbers on brushed silver chapter ring....More Details »
Item #: 90054
Condition:
New
Price: $55.00
Description: 6-1/16” time track. Hermle logo above 10.25mm center hole. 9.25mm winding arbor holes on 2-3/16” centers. Silver polished steel bezel. “Made in Germany” at dial bottom. Four 1” long...More Details »
Item #: 90041
Condition:
New
Price: $12.00
Description: Aluminum beat scale. White background with black details. 1" tall x 2-7/16" wide. Used on Hermle clocks and others. Regularly $5.00. While supplies last.
Item #: 199311
Condition:
New
Price: $2.50
Description: 30mm tall milled brass Roman numerals in a full set. May require polishing. Regularly $22.50. While supplies last.
Item #: 226371
Condition:
New
Price: $10.00
Description: Stamped #15, but measures between 5.25mm-5.4mm. Can use as equivalent #12 (5.25mm) Swiss size or #14 (5.2mm) American size. Made in West Germany. Regularly $3.00. While supplies last.
Item #: 02593
Condition:
New
Price: $1.00
Description: New, old stock. Made in West Germany. Use as American size #16. Regularly $3.00. While supplies last.
Item #: 02590
Condition:
New
Price: $1.00
Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautifully polished brass bob measures 10-5/8” (270mm) diameter. Straight rods. Overall length is 43”. Made in...More Details »
Item #: 90344
Condition:
New
Price: $80.00
Description: 13” outside diameter. Bright polished finish. Regularly 33.00. While supplies last.
Item #: 90340
Condition:
New
Price: $16.50
Description: 200mm x 285mm (7-13/16” wide x 11-3/16” tall) overall. Brushed brass background. Screened scrolling in center section. 4 gold toned spandrels at corners. 6-13/16” time track. Raised black...More Details »
Item #: 90341
Condition:
New
Price: $45.00
Description: 5-3/8” time track. Cutout for moon phase. Hinged brass bezel. “Hermle” logo above 10mm center hole. “Germany” at dial bottom. Regularly $40.00. While supplies last.
Item #: 90081
Condition:
New
Price: $20.00
Description: Ornate screened brass with brass finished corner spandrels. 5” time track. Black numerals on brushed silver chapter ring. “Hermle” logo above the 10mm center hole. “Made in Germany” at...More Details »
Item #: 90337
Condition:
New
Price: $15.00
Description: Ivory background with 4 green palm trees depicted. 6-3/8” time track. Hinged brass bezel with decorative embossed edge. “Hermle” logo above the 10mm center hole. “Since 1922” imprinted...More Details »
Item #: 90049
Condition:
New
Price: $20.00
Description: For quartz movements. 70mm bob x 420 rod. Speckled antiqued brass finished bob. Split hooked rod. Regularly $7.50. While supplies last.
Item #: 90256
Condition:
New
Price: $3.75
Description: 170mm x185mm brass finished aluminum. 5-15/16” time track. Raised black numerals on brushed silver chapter ring. Same as #90082 except with embossed gold & brass finished center & corners....More Details »
Item #: 90082
Condition:
New
Price: $5.25
Description: 143mm square x 197mm tall overall brushed silver finished aluminum dial. 4-5/16” brush silver time track. Center & spandrel screened gold vines and on both sides of the 1-7/16” ivory Tempus...More Details »
Item #: 90065
Condition:
New
Price: $10.00
Description: 1/2” rear slot. Regularly $7.50. While supplies last.
Item #: 90255
Condition:
New
Price: $3.75
Description: Screened aluminum dial. 8-5/8” time track. “Hermle” logo above the 10mm center hole. 3–3/16” on centers between 9.5mm winding arbor holes. “Westminster” below the winding arbor center...More Details »
Item #: 90050
Condition:
New
Price: $10.00
Description: 180mm outside diameter. Arabic numerals on brushed silver chapter ring. 6” time track. “Hermle” logo above the 10mm center hole. 3–3/16” on centers between 9.5mm winding arbor holes....More Details »
Item #: 90086
Condition:
New
Price: $10.00
Description: Polished brass bob with white R & A center. For mechanical pendulum assemblies. 9/32” rear slot for rod, not included. Regularly $10.00. While supplies last.
Item #: 90234
Condition:
New
Price: $5.00
Description: Brass dial back with distressed white dial face. 5-7/8”time track. “Franze Hermle & Sohn-1922” above 10mm center hole. “Made in Germany” at dial bottom. Regularly $15.00. While supplies last.
Item #: 90052
Condition:
New
Price: $7.50
Description: Brass finished aluminum. 5-15/16” time track. Embossed black numerals on brushed silver chapter ring. Same as #90082 except with embossed brown & brass finished center & spandrels. “Hermle”...More Details »
Item #: 90083
Condition:
New
Price: $6.00
Description: Brushed silver finished aluminum. 4” time track. “Hermle” logo above 10mm center hole. “Since 1922” below center hole. “Made in Germany” at dial bottom. Used on Hermle #22926, but can...More Details »
Item #: 90059
Condition:
New
Price: $5.00
Description: White dial with 10-5/8” time track. 1-3/4” seconds circle with 1-3/8” time track. Slot for chime settings at III. “Hermle” logo below the 9mm winding arbor hole. Brass bezel. Four...More Details »
Item #: 90042
Condition:
New
Price: $20.00
Description: Brass bob with stylized antiqued R & A center. For quartz pendulum assemblies. 9/32” rear slot for rod, not included. Regularly $10.00. While supplies last.
Item #: 90334
Condition:
New
Price: $5.00
Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautifully polished brass bob measures 8-5/8” (220mm) diameter. Straight rods. Overall length is 42”. Made in...More Details »
Item #: 90225
Condition:
New
Price: $60.00
Description: Speckled white finished aluminum. For quartz pendulum assemblies. 9/32” rear slot for rod, not included. Regularly $7.50. While supplies last.
Item #: 90332
Condition:
New
Price: $3.75
Description: White dial with 5-1/4” time track. Brass finished aluminum bezel.“Hermle” logo above the 10mm center. 10mm winding arbor holes on 3-3/16” centers. Regularly $9.00. While supplies last.
Item #: 90333
Condition:
New
Price: $4.50
Description: Machined brass. 2” wide x 1” tall x 5/16” thick. Used on some Hermle cases, but can use on others. Regularly $12.00. While supplies last.
Item #: 90001
Condition:
New
Price: $6.00
Description: 7/8” tall triangular hanging section x 1” wide x 1” tall. 1.0mm (.040”) thick steel. Regular $1.00. While supplies last.
Item #: 90167
Condition:
New
Price: $0.25
Description: Machined brass. Nickel plated. 2” wide x 1” tall x 5/16” thick. Used on some Hermle cases, but can use on others. Regularly $12.00. While supplies last.
Item #: 90002
Condition:
New
Price: $6.00
Description: Nickeled steel. 3-5/8” long. Regularly $5.00. While supplies last.
Item #: 90328
Condition:
New
Price: $2.50
Description: 29.5mm OD x 12mm ID x 3mm thick (1.161” X .472” X .118”). Regularly $2.50. While supplies last.
Item #: 90172
Condition:
New
Price: $1.25
Description: 30mm OD x 11.5mm ID x 1mm thick (1.181” X .452” X .040”). Regularly $2.50. While supplies last.
Item #: 90171
Condition:
New
Price: $1.25
Description: 2-9/16” tall. Brass plated steel. .173” width of positioning slot which has a plastic washer assembled. Three 6mm (.236”) countersunk mounting holes. Regularly $10.00. While supplies last.
Item #: 90011
Condition:
New
Price: $5.00
Description: Produced by Hermle as part of a memorial urn clock that was sold to & by cemeteries & funeral homes. Bronze urn can be engraved. Use for a loved one up to 190 lbs. Can use for other purposes as...More Details »
Item #: 90037
Condition:
New
Price: $12.00
Description: Brushed brass finished aluminum with a 5mm wide rear slot. Regularly $5.00. While supplies last.
Item #: 90241
Condition:
New
Price: $2.50
Description: Rear slot accommodates 5mm wide pendulum rods. 6-3/4” overall height. Lyre plate is 2-3/16” at widest point x 3” tall. Regularly $16.00. While supplies last.
Item #: 90258
Condition:
New
Price: $6.00
Description: Rear slot accommodates 5mm wide pendulum rods. 4-1/4” overall height. Lyre plate is 2-3/16” at widest point x 3” tall. Regularly $15.00. While supplies last.
Item #: 90226
Condition:
New
Price: $6.00
Description: Brass. 5mm wide. Split hook end. Without a threaded end. Regularly $2.50. While supplies last.
Item #: 90244
Condition:
New
Price: $1.25
Description: Brass. 5mm wide. Split hook end. Without a threaded end. Regularly $2.50. While supplies last.
Item #: 90250
Condition:
New
Price: $1.25
Description: Protects quartz movements from the elements. Inside dimensions accommodate a standard 2-3/16” square or 2-1/4” square mini quartz movement. Regularly $2.50 each. While supplies last.
Item #: 90249
Condition:
New
Price: $1.25
Description: 5” time track. 7.5mm winding arbor holes on 2” centers. Hermle logo above 10mm center hole. Hinged brass bezel. Regularly $28.00. While supplies last.
Item #: 90048
Condition:
New
Price: $14.00
Description: 5-1/4” time track. Hermle logo above 10mm center hole. 10mm winding arbor holes on 3-3/16” centers. Silver finished aluminum bezel. Regularly $12.00. While supplies last.
Item #: 90325
Condition:
New
Price: $6.00
Description: Brass. 5mm wide. Split hook end. Without a threaded end. Regularly $2.50. While supplies last.
Item #: 90238
Condition:
New
Price: $1.25
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group