- Home »
- Catalog »
- Clock Repair & Replacement Parts »
- Movements, Motors, Rotors, Fit-Ups & Related
Timesavers - Movements, Motors, Rotors, Fit-Ups & Related
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Select a Sub-Category
For American wall, kitchen & mantel clocks, cuckoos, Hermle, Junghans, musical, novelty clocks, regulators, etc.
Battery-run pendulum & non-pendulum movements, fit-ups and related items
Movements, Motors, Rotors, Fit-Ups & Related Featured Products
Description: 9.5mm thread diameter x 11/32" long under the head. Used to mount many German movements to dials. Regularly $0.75. While supplies last.
Item #: 02722
Condition:
New
Price: $0.25
Description: 9.5mm thread diameter. Used with fixation nuts. Regularly $0.50. While supplies last.
Item #: 02723
Condition:
New
Price: $0.25
Description: 9.5mm long hand shaft (3/8" approx.). 2-7/32" x 2-7/32" x 5/8" deep snap-in movement. Asia. 1/16" max dial thickness. Runs on 1-AA battery. Hands & battery not included.
NOTE: This movement has...More Details »
Item #: 02719
Condition:
New
Price: $1.75
Description: Measures 2-1/2" x 2-1/4" x 3/4" thick. 16mm (approx. 5/8") hand shaft length. Uses special European I-Shaft hands (Our #34255 or #34256) with an oblong mounting hole that measures .285" wide x...More Details »
Item #: 34254
Condition:
New
Price: $54.50
Description: Most current quartz rotating pendulum movement for Haller clocks produced after 1997. Measures 2-1/2" x 2-1/4" x 3/4" thick. 16mm (approx. 5/8") hand shaft length. Uses special European I-Shaft...More Details »
Item #: 34261
Condition:
New
Price: $39.50
Used on some Hermle cases but can use on others. 1-3/4” diameter x 1/32”
thick black oxided steel cover
with 3 mounting hole
Price: $1.50
Description: 2" OD x 3/8" ID x 1/8" thick (50.0mm x 9.5mm x 3.2mm). CLOSEOUT.
Item #: 34250
Condition:
New
Price: $1.00
Description: 2-tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 36-teeth with improvement in tonal quality.
Item #: 34232
Condition:
New
Price: $73.50
Description: Spring #3437. New, old stock. Regularly $3.00. While supplies last.
Item #: 02658
Condition:
New
Price: $1.00
Description: New, old stock. Regularly $25.00. While supplies last.
Item #: 02668
Condition:
New
Price: $12.50
Description: New, old stock. Regularly $30.00. While supplies last.
Item #: 02669
Condition:
New
Price: $15.00
Description: New, old stock. 110 volts, 60 cycles. Fits Ardmore Model S5E, Bachelor Model S5A, Country Clock Models S5k-S5K-1, Dunbar, Logan, Manor Model S5B, Pittsfield Model S5G and Troy. Regularly $16.00. While supplies last.
Item #: 02650
Condition:
New
Price: $8.00
Description: New, old stock. 110 volts, 60 cycles. Regularly $16.00. While supplies last.
Item #: 02651
Condition:
New
Price: $8.00
Description: Gold plastic bezel with plastic lens. Gold Roman dial ring with black numerals. 3/4” gold second bit. 4” (103mm) bezel diameter. 3-1/2” minimum hole diameter. 2” depth below bezel. Visible...More Details »
Item #: 34239
Condition:
New
Price: $23.50
Description: 1-11/64” (45mm) outside diameter. Brass metal bezel. 1-5/8" mounting hole diameter with 5/32" mounting depth below bezel. White dial with Arabic numerals. Can combine with any other size or style...More Details »
Item #: 34243
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 1-11/64” (45mm) outside diameter. Brass metal bezel. 1-5/8" mounting hole diameter with 5/32" mounting depth below bezel. White dial with Roman numerals. Can combine with any other size or style...More Details »
Item #: 34244
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 3-1/16" plastic brass tone ridged bezel diameter x 2-13/16" minimum hole diameter by 1-1/4" depth below the bezel. Plastic lens. White dial with Roman numerals & an alarm function. Runs on a "AA"...More Details »
Item #: 34015
Condition:
New
Price: $8.75
as low as: $8.25
12 or more
Description: 2-1/4" x 2-1/8" x 5/8" thick rotating movement spins in one direction different from
No. 14528 which oscillates back & forth. 2-1/4" tall gold plastic ball unit #33882 (included) sits on a 1-5/8"...More Details »
Item #: 34202
Condition:
New
Price: $6.00
as low as: $5.25
12 or more
Description: 29.5mm OD x 12mm ID x 3mm thick (1.161” X .472” X .118”). Regularly $2.50. While supplies last.
Item #: 90172
Condition:
New
Price: $1.25
Description: 30mm OD x 11.5mm ID x 1mm thick (1.181” X .452” X .040”). Regularly $2.50. While supplies last.
Item #: 90171
Condition:
New
Price: $1.25
Description: Protects quartz movements from the elements. Inside dimensions accommodate a standard 2-3/16” square or 2-1/4” square mini quartz movement. Regularly $2.50 each. While supplies last.
Item #: 90249
Condition:
New
Price: $1.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 13.0mm long under head. Regularly $0.75. While supplies last.
Item #: 90323
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 5.0mm long under head. Regularly $0.75. While supplies last.
Item #: 90184
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 7.0mm long under head. Regularly $0.75. While supplies last.
Item #: 90185
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 9.0mm long under head. Regularly $0.75. While supplies last.
Item #: 90187
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 11.0m long under head. Regularly $0.75. While Supplies last.
Item #: 90186
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 15.0mm long under head. Regularly $0.75. While supplies last.
Item #: 90188
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 8.0mm thread diameter x 19.5mm long under head. Regularly $0.75. While supplies last.
Item #: 90189
Condition:
New
Price: $0.25
Description: Used to mount many German quartz movements to dials. 10.0mm thread diameter x 7.0mm long under head. Regularly $0.75. While supplies last.
Item #: 90183
Condition:
New
Price: $0.25
Description: Gold finish on steel. 4-3/4” X 6-5/16”. Regularly $15.00. while supplies last.
Item #: 90296
Condition:
New
Price: $7.50
Description: Exquisitely machined .109” thick x 9-3/4” outside diameter solid brass plate. Month, days of the month, and corresponding zodiac sign (no zodiac illustration) are imprinted around the...More Details »
Item #: 90297
Condition:
New
Price: $125.00
Description: Quartz movement black speaker cover. 1/32” (.032”) thick. Regularly $1.00. While supplies last.
Item #: 90295
Condition:
New
Price: $0.50
Description: 3-1/8” (80mm) outside diameter x 2-5/8” inside diameter metal speaker ring for Hermle quartz movements. Three 1/8” mounting holes. Regularly $2.00. While supplies last.
Item #: 90198
Condition:
New
Price: $1.00
Description: 16.0mm offset width x 38.8mm offset length with .125” diameter mounting holes. 11.5mm offset height. Nickeled steel. Regularly $2.00. While supplies last.
Item #: 90191
Condition:
New
Price: $0.50
Description: 15.5mm offset width x 37.8mm offset length with .125” diameter mounting holes. 16.0mm offset height. Nickeled steel. Regularly $2.00. While supplies last.
Item #: 90192
Condition:
New
Price: $0.50
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. Nickeled steel. For short center shaft. Regularly $2.00. While supplies last.
Item #: 90195
Condition:
New
Price: $0.50
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. Nickeled steel. For short center wheel. Regularly $2.00. While supplies last.
Item #: 90196
Condition:
New
Price: $0.50
Description: 2 tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 22-teeth with improvement in tonal quality.
Item #: 34190
Condition:
New
Price: $52.50
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
29/32” (23mm) Hand Shaft Length & 7/16” Max Dial Thickness. Mounting hardware included. Uses I-Shaft...More Details »
Item #: 34171
Condition:
New
Price: $5.25
as low as: $4.50
12 or more
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
25/32” (20mm) Hand Shaft Length & 5/16” Max Dial Thickness. Mounting hardware included. Uses I-Shaft...More Details »
Item #: 33773
Condition:
New
Price: $5.25
as low as: $4.50
12 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/32" long hand shaft. Max dial thickness of 1/8". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33769
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/32" long hand shaft. Max dial thickness of 3/16". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33889
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
21/32” (17mm) Hand Shaft Length & 1/4” Max Dial Thickness. Mounting hardware included. Uses I-Shaft...More Details »
Item #: 33772
Condition:
New
Price: $5.25
as low as: $4.50
12 or more
Description: 13mm hand shaft (1/2"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/8". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33875
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/16" long hand shaft. Max dial thickness of 1/4". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33770
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: 23mm hand shaft (29/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/2". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33877
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: 17mm hand shaft (21/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/4". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33876
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: 9mm, 9.5mm and 10mm internally & externally threaded brass nuts. Used to mount movements to dials on many German quartz movements.
Item #: 33751
Condition:
New
Price: $9.50
Description: Old style 10 ft. gold rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Item #: 33752
Condition:
New
Price: $29.00
Description: Based on the lunar day of 24 hours and 50 minutes, this movement tells the general time of high and low tide. 2-3/16" x 2-3/16" x 5/8". Uses a standard "Push-On" hour hand only (which has a 5.0mm...More Details »
Item #: 33883
Condition:
New
Price: $5.50
as low as: $4.75
12 or more
Description: 3-1/16" plastic brass tone ridged bezel diameter x 2-13/16" minimum hole diameter by 1-1/4" depth below the bezel. Plastic lens. Ivory dial with Roman numerals, gold center disc & an alarm...More Details »
Item #: 34173
Condition:
New
Price: $8.75
as low as: $8.25
12 or more
Description: Made in the Asia. 2-1/4" x 2-1/4" x 5/8" thick with a 21/32" long hand shaft. Maximum dial thickness is 1/4". Runs on one "AA" battery which is not included. 24-hour mechanism is used in...More Details »
Item #: 34172
Condition:
New
Price: $5.00
as low as: $4.25
12 or more
Description: Wood handle. 6” long. Slotted end will accommodate 5/16” (.312”) & M8 (.315”) across flats hex nuts. India.
Item #: 34158
Condition:
New
Price: $3.50
Description: Original Westclox material. 1-7/16” wide x 1” tall. For Big Ben Loud Alarm Clocks & others. Regularly $5.00. While supplies last.
Item #: 01997
Condition:
New
Price: $2.00
Description: Original Westclox material. 1-9/16” long post. Used on Big Ben Chime Alarm and others. Regularly $6.00. While supplies last.
Item #: 01989
Condition:
New
Price: $3.00
Description: Used on Kundo Standard. Part #01-58. M1.2 x 7mm slotted fillister head stainless screw. Regularly $1.00. While supplies last.
Item #: 01894
Condition:
New
Price: $0.50
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Fancy white and gold dial with Roman numerals. Style #4. Uses one "AA" battery which is not included. Can...More Details »
Item #: 34054
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 20mm hand shaft (25/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 3/8". Stepping sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Requires standard push-on...More Details »
Item #: 34037
Condition:
New
Price: $3.50
as low as: $2.75
50 or more
Description: Used on both 24mm and 41mm Regula 25 1-day music movement dance platform assemblies. Brass. 20 teeth. 2.0mm mounting hole diameter. 12.5mm overall diameter x 3.75 overall height.
Item #: 34035
Condition:
New
Price: $3.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group