Description: Old style 10 ft. gold rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Description: Back in stock!! Replaces the field, coil & rotor assembly of many "B" type rotors. Easy to mount with existing layout. High torque. Non-reversible. 1 RPM. Runs slightly noisy & warm.
Description: Small brass hand nut for Synchron Type C movements with smaller diameter hand shafts. Used on 3/4" & 7/8" long hand shafts. See #32983 for hand nut used on 1" & 1-3/8" hand shafts.
Description: Large brass hand nut for Synchron Type C movements with larger diameter hand shafts. Used on 1" & 1-3/8" long hand shafts. See #32982 for hand nut used on 3/4" & 7/8" hand shafts.
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 6 foot power cord. 5/8" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/4". Uses standard I-shaft hands...More Details »
Description: This 0.15mm wire diameter silver plated copper spring has a 4mm end loop and 2mm diameter coils. The spring is fitted to the Bulle with one end attached to the end of the fork arbor and the other...More Details »
Description: Cut from 0.20mm shim steel. Made for the tall Bulle movement and will need to be finished with the silver contact and fibre insulator. 23.0mm tall x 13.0mm wide with 1.0mm diameter rivet holes.
Description: 18 coils of 4mm diameter wire with two half end coils at right angles. These springs compensate for variations in battery voltage and temperature. They’re made from a copper-nickel (C-902) alloy...More Details »
Description: Old style 10 ft. brown rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 6 foot power cord. 17/32" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/8". Uses standard I-shaft...More Details »
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 6 foot power cord. 1-1/4" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 3/4". Uses standard I-shaft...More Details »
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 6 foot power cord. 7/8" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/2". Uses standard I-shaft hands...More Details »
Description: Hansen A-43RA motor is 1 RPM and 60 cycle, 110V 3W. Includes a 10 tooth pinion. 2" diameter x 1-3/8" deep. 5.5 mm pinion diameter .
Runs clockwise.