Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: 2.6mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24181
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: 1.6mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
**Currently out of stock with no ETA**
Item #: 24176
Condition:
New
Not Available
Price: $1.00
as low as: $0.75
12 or more
Description: 1.8mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24177
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: 2.0mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24178
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: 2.2mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24179
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: 2.4mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24180
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: Double end brass key with brass plated steel wing. 3.6mm/1.8mm. NOTE: Currently out of stock. Same key In a long shaft version. Order #10099.
Item #: 23925
Condition:
New
Not Available
Price: $3.50
as low as: $3.25
12 or more
Description: #9 (4.50mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23993
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #8 (4.25mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23992
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #7 (4.00mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23991
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #6 (3.75mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India.
Item #: 23990
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #13 (5.50mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23997
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #12 (5.25mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23996
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #11 (5.00mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23995
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #10 (4.75mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23994
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: Black tapered I-shaft hands. Measures 10" from center of mounting hole to tip of minute hand. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Use with high torque quartz movements.
Item #: 29157
Condition:
New
Price: $7.25
Description: Unfinished spade I-shaft hands. Measures 8-1/8" from center of mounting hole to tip of minute hand. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Use with high torque quartz movements
Item #: 29175
Condition:
New
Price: $9.00
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal modern style hands have a 2=1/8" long minute hand as measured from the...More Details »
Item #: 17103
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade style hands have a 6-7/8" long minute hand as measured from the...More Details »
Item #: 17110
Condition:
New
Price: $2.25
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered style hands have a 3-13/16" long minute hand as measured from...More Details »
Item #: 29033
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: Brass serpentine hands for Hermle mechanical movements & others have square mounting holes. The minute hand is 6-1/4" as measured from the center of the mounting hole to the tip. With 2.0mm...More Details »
Item #: 29018
Condition:
New
Price: $8.50
Description: Fits Hermle & other German clocks. Black hands with bushings. 2.5mm square minute hand bushing, 4.5mm round hour hand bushing. 3-7/16" from center of the mounting hole to the tip. Made in Asia.
Item #: 11538
Condition:
New
Price: $4.00
Description: Used on many old clocks. Bushed hour hand. 2-1/2" length of minute hand from center of mounting square to the tip. Sold in pairs.
Black finish.
3.40mm minute hand square opening
5.40mm hour hand bushing
Item #: 29486
Condition:
New
Price: $2.50
Description: Used on many old clocks. Bushed hour hand. 5-3/8" length as measured from center of square minute hand mounting hold to tip. Black finish. Sold in pairs.
5.5 mm hour hand bushing
3.3 mm minute hand square
Item #: 29488
Condition:
New
Price: $3.00
Description: Brass bushings in both the hour and minute, blued steel hands. The minute hands measure 14.5mm (9/16”) from the center of the round hole 1.6mm bushed mounting hole to the tip. Hour hand has a 2.4mm round hole brass bushing.
Item #: 29751
Condition:
New
Price: $6.00
Description: Replacement 27-tooth brass drive gear for our #14600 Golden Hour Motor. Special tools are required to properly and safely remove your damaged drive gear and to install a new drive gear. We do not...More Details »
Item #: 29700
Condition:
New
Price: $8.00
Description: 10 piece pack. Brass Washers that fits 10mm shafts.7/16" ID.
Item #: 23862
Condition:
New
Price: $1.50
Description: 25 pcs. each of 10 different sizes of steel taper pins 0.43 - 0.63" or 11 - 16mm or 16mm long. Combine with #23852 for price break. Germany.
Item #: 23853
Condition:
New
Price: $30.00
as low as: $29.50
2 or more
Description: 25 pcs each of 10 different sizes of brass taper pins 0.43 - 0.63" or 11 - 16mm long. Combine with #23853 for price break. Germany
Item #: 23852
Condition:
New
Price: $30.00
as low as: $29.50
2 or more
Description: Measures .054" on small end & .070" on large end x .600" long. 50 pcs per pack.
Item #: 23841
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .054" on small end & .070" on large end x .600" long. 50 pcs per pack.
Item #: 23836
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .044" on small end & .060" on large end x .600" long. 50 pcs per pack.
Item #: 23840
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .044" on small end & .060" on large end x .600" long. 50 pcs per pack.
Item #: 23835
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .034" on small end & .050" on large end x .600" long. 50 pcs per pack.
Item #: 23839
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .034" on small end & .050" on large end x .600" long. 50 pcs per pack.
Item #: 23834
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .024" on small end & .040" on large end x .600" long. 50 pcs per pack.
Item #: 23838
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .024" on small end & .040" on large end x .600" long. 50 pcs per pack.
Item #: 23833
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .010" on small end & .026 on large end x .600" long. 50 pcs per pack.
Item #: 23837
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Measures .010" on small end & .026 on large end x .600" long. 50 pcs per pack.
Item #: 23832
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: 6" outside diameter. Time track is 5-1/2". With arabic numerals and a fancy gold center.
Item #: 29138
Condition:
New
Price: $6.50
Description: Fits Kieninger SK Movements. Wire Dia. 1.60mm. Links per foot 45. Length 58-1/2". Brass plated steel.
Item #: 29398
Condition:
New
Price: $12.00
as low as: $11.75
2 or more
Description: Brass plated steel clock chain is 72" in length, has 47 links per foot and is made of 1.70mm wire. Used on #241, #451, #461, #1151 & #1161 movements & other clocks. BACK IN STOCK.
Item #: 32100
Condition:
New
Price: $13.50
as low as: $13.25
2 or more
Description: Antiqued brass clock chain is 55" in length, has 46 links per foot and is made of 1.60mm wire. Made in Germany.
Item #: 19915
Condition:
New
Price: $13.00
as low as: $12.75
2 or more
Description: Brass plated steel clock chain is 72" in length, has 43 links per foot and is made of 1.60mm wire. Used on Hermle & other clocks.
Item #: 32106
Condition:
New
Price: $12.00
as low as: $11.75
2 or more
Description: Brass plated steel clock chain is 72" in length, has 44 links per foot and is made of 1.40mm wire.
Item #: 32107
Condition:
New
Price: $12.50
as low as: $12.25
2 or more
Description: 1.35mm diameter x 39 links per foot x 72" long. Brass plated steel.
Item #: 29636
Condition:
New
Price: $14.00
as low as: $13.75
2 or more
Description: 1.20mm diameter x 39 links per foot x 72" long. Brass plated steel.
Item #: 29635
Condition:
New
Price: $9.00
as low as: $8.75
2 or more
Description: Hardwood. 2-9/16” Long. Brown stained.
Item #: 29953
Condition:
New
Price: $7.50
Description: Hand carved brown wood tops with wood deer head and brown plastic antlers. Size is measured end to end. 7".
Item #: 29409
Condition:
New
Price: $64.00
Description: Narrow door lock is ideal for grandfather clocks. Gun metal grey finish. Fits left or right hand doors. 13/16 inches wide x 2-3/4 inches tall x 5/16" deep. With brass platedkey. NOTE: Key style may...More Details »
Item #: 23928
Condition:
New
Price: $10.00
Description: Steel set measures 2" long x 1" wide x 5/16" deep. Comes with #23940 key that measures 2-1/8" long with a 3/8" throw (measurement from the center of the end hole diameter to the bottom of the end...More Details »
Item #: 29264
Condition:
New
Price: $11.00
Description: Brass lock measures 1-3/4" long x 1" wide x 3/8" deep. With a brass key #23934 that is 2-7/16" long with a 5/16" throw (measurement from the center of the end hole diameter to the bottom of the end...More Details »
Item #: 29265
Condition:
New
Price: $10.00
Description: Cast pot metal with an antique finish. 3.5mm mounting hole. Use on floor and wall clocks and other fine furniture. 1-3/8" wide x 1-3/16" tall.
⚠️ WARNING: Contains chemicals that may cause...More Details »
Item #: 29337
Condition:
New
Price: $5.00
Description: Cast pot metal, brass plated. For floor & wall clocks & other fine furniture. Made in China. 5-1/8" L x 3/4" W
⚠️ WARNING: This product can expose you to chemicals including lead, which is...More Details »
Item #: 29560
Condition:
New
Price: $4.50
Description: 2 pcs each of brass door hooks (3/4", 1", 1-1/4" & 1-1/2") and brass door hook eyes (1/2" and 3/4").
Item #: 13556
Condition:
New
Price: $4.25
Description: 4-pack of plastic leg leveling screws with T-nuts. Molded black plastic head is 1-1/16" in diameter. Screw is 1/4"-20 x 1" with a 5/16" matching T-nut. Drill a 5/16" hole, press in the T-nut.
Item #: 23851
Condition:
New
Price: $4.00
Description: American Made. Blanks have no bores. For 2.0mm & 3.0mm plate thicknesses. 100 pc. assortment contains 10 pcs. each of sizes:
2.00mm height x 2.00mm OD
2.00mm height x 2.50mm OD
2.00mm height x...More Details »
Item #: 10518
Condition:
New
Price: $33.00
Description: Brass cuckoo wheel with steel cut pinion. For 8-Day cuckoo movements without cuckoo dancers.
Item #: 20774
Condition:
New
Price: $6.00
Description: 11" time track diameter white paper dial has roman numerals. No trademark (plain).
Item #: 12424
Condition:
New
Price: $2.25
as low as: $2.00
12 or more
Description: Made in Germany. Complete set of 20mm tall white plastic numerals.
Item #: 10517
Condition:
New
Price: $2.50
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group