Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: 3 1/4" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18329
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 4-1/4" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18330
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 3-3/4" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18331
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 3-1/4" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18332
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 2-3/8" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18334
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 3-1/2" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18335
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 3-1/2" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18336
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 2-1/2" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18337
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 2-1/8" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18338
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 2-1/8" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18339
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: 2-1/2" tall unfinished hardwood finial is flat on one side. Made in Asia. Combine with others for price break.
Item #: 18340
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: Exact replacement for Sonoran chime mainspring. Metric equivalent: 25.4 x 0.56 x 3454mm.
Item #: 23137
Condition:
New
Price: $60.00
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 1/4" long hand shaft. Max dial thickness of 1/8". Uses one "AA" battery which is not included. Has an alarm feature. Stepping sweep. Complete with...More Details »
Item #: 14576
Condition:
New
Price: $6.00
as low as: $5.25
12 or more
Description: Gold borders and stripes glass transfers are designed to be applied to existing glass by a pressure transfer method. Images are 1/4" wide and up to 11-7/8" long.
Item #: 19229
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold borders and stripes glass transfers are designed to be applied to existing glass by a pressure transfer method. Images are 11/16" wide and up to 11-7/8" long.
Item #: 19230
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold Seth Thomas cottage clock, spandrel, pendulum opening and throat glass transfers are designed to be applied to existing glass or dials by a pressure transfer method. Can combine with others...More Details »
Item #: 19214
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold Seth Thomas cottage clock, spandrel, pendulum opening and throat glass transfers are designed to be applied to existing glass or dials by a pressure transfer method. Can combine with others...More Details »
Item #: 19216
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold regulator glass transfers are designed to be applied to existing glass by a pressure transfer method. Can combine with other Regulator transfers for price breaks. Lettering is 1-1/16" tall. The image is 7-3/8" long.
Item #: 19220
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold regulator glass transfers are designed to be applied to existing glass by a pressure transfer method. Can combine with other Regulator transfers for price breaks. The first image has 5/8"...More Details »
Item #: 19223
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold regulator glass transfers are designed to be applied to existing glass by a pressure transfer method. Can combine with other Regulator transfers for price breaks. The first image has 3/4"...More Details »
Item #: 19225
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold rRegulator glass transfers are designed to be applied to existing glass by a pressure transfer method. Can combine with other Regulator transfers for price breaks. The first image has...More Details »
Item #: 19226
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: Gold Seth Thomas cottage clock, spandrel, pendulum opening and throat glass transfers are designed to be applied to existing glass or dials by a pressure transfer method. Can combine with others...More Details »
Item #: 19212
Condition:
New
Price: $7.50
as low as: $7.25
3 or more
Description: This brass main wheel click spring is used to put tension on clicks on American and British tall case movements. 57.6mm.
Item #: 10535
Condition:
New
Price: $3.50
Description: Turned tapered hardwood wood peg for English Dial clocks & others. Measures 3" long.
Item #: 17733
Condition:
New
Price: $4.00
Description: 3-1/2" overall height length grandfather bell stand. Used on tall case movements.
Item #: 12169
Condition:
New
Price: $18.50
Description: Cast base with threaded end is 4-5/8" long. It can be cut to required size. With a 3" diameter wire gong. For mantel clocks.
Item #: 12164
Condition:
New
Price: $22.00
Description: Black metal hands for Vienna clocks. Minute hand is 2-5/8" long as measured from the center of the square mounting hole to the tip. Brass bushings on both hands. The minute hand has a 2mm square hole, the hour hand has a 4.9mm round hole.
Item #: 13037
Condition:
New
Price: $10.00
Description: Black maltese hands with 3.25mm square mounting hole in minute hand. Measures 5-9/16" from center of minute hand mounting hole to tip. 5.5mm bushed hour hand.
Item #: 13041
Condition:
New
Price: $5.25
Description: 25 assorted stainless steel floating balance wires. From .008" through .025" diameters.
Item #: 11220
Condition:
New
Price: $8.50
Description: 3.60mm rod diameter x 18" long steel chime rod. With a slotted copper mounting screw that has a 6.5mm thread diameter. Made in Germany.
Item #: 12207
Condition:
New
Price: $7.00
as low as: $6.75
3 or more
Description: 3.60mm rod diameter x 24" long steel chime rod. With a slotted copper mounting screw that has a 6.5mm thread diameter.
Item #: 12210
Condition:
New
Price: $7.00
as low as: $6.75
3 or more
Description: 3.60mm rod diameter x 26" long steel chime rod. With a slotted copper mounting screw that has a 6.5mm thread diameter.
Item #: 12211
Condition:
New
Price: $7.00
as low as: $6.75
3 or more
Description: 3.30mm rod diameter x 26" long steel chime rod. With a slotted copper mounting screw that has a 6.5mm thread diameter.
Item #: 12222
Condition:
New
Price: $7.00
as low as: $6.75
3 or more
Description: 12 piece assortment of brass hand nuts for cuckoo clocks.
There are three sizes - Lg. 9.11 mm OD , 2.04 mm ID , Med. 7.23 mm OD, 1.87 mm ID , Small 6.19 mm OD , 1.60 mm ID .
All sizes listed are approximate.
Item #: 10539
Condition:
New
Price: $10.00
Description: Original licensed Golden Hour replacement motor with a brass 27 tooth gear. 115 volt, 60 cycles. Ready to install! If your old motor has a groove on the brass drive gear, the problem usually...More Details »
Item #: 14600
Condition:
New
Price: $53.50
as low as: $52.50
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered stick style hands have a 5-1/4" long minute hand as measured...More Details »
Item #: 13115
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: 10' long roll of flexible 1/4" round rubber reduces glass installation problems. Prevents breakage. Installs with brads or staples.
Item #: 15732
Condition:
New
Price: $4.00
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal serpentine style hands have a 1-3/8" long minute hand as measured from...More Details »
Item #: 13140
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal fancy hands have a 3-1/4" long minute hand as measured from the center...More Details »
Item #: 13145
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal stick style hands have a 4-1/4" long minute hand as measured from the...More Details »
Item #: 13148
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal stick style hands have a 4-1/4" long minute hand as measured from the...More Details »
Item #: 13149
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade style hands have a 4" long minute hand as measured from the...More Details »
Item #: 13152
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal spade style hands have a 4" long minute hand as measured from the center...More Details »
Item #: 13153
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal maltese style hands have a 2-1/8" long minute hand as measured from the...More Details »
Item #: 13156
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal modern style hands have a 3-5/8" long minute hand as measured from the...More Details »
Item #: 13192
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal serpentine style hands have a 4-1/8" long minute hand as measured from...More Details »
Item #: 13195
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal serpentine style hands have a 2-1/16" long minute hand as measured from...More Details »
Item #: 16738
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade style hands have a 2-1/8" long minute hand as measured from the...More Details »
Item #: 16740
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal spade style hands have a 2-1/8" long minute hand as measured from the...More Details »
Item #: 16741
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal spade style hands have a 4-9/16" long minute hand as measured from the...More Details »
Item #: 16743
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered stick style hands have a 2-1/8" long minute hand as measured...More Details »
Item #: 16745
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.Gold metal tapered stick style hands have a 2-1/8" long minute hand as measured from...More Details »
Item #: 16746
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.Black metal spade style hands have a 2-1/2" long minute hand as measured from the...More Details »
Item #: 17720
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal spade style hands have a 2-1/2" long minute hand as measured from the...More Details »
Item #: 17721
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered stick style hands have a 5-1/2" long minute hand as measured...More Details »
Item #: 19840
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal fancy style hands have a 1-3/4" long minute hand as measured from the...More Details »
Item #: 19865
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered stick style hands have a 17-13/4" long minute hand as measured from the center of the...More Details »
Item #: 19905
Condition:
New
Price: $9.00
Description: 2" brass bezel diameter x 1-13/16" minimum hole diameter by 9/32" depth below the bezel. Plain white dial with roman numerals. Can combine with any other size & style fit-ups for price breaks. Style #2. Runs on a watch battery, included.
Item #: 19858
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 2" brass bezel diameter x 1-13/16" minimum hole diameter by 9/32" depth below the bezel. Plain white dial with Arabic numerals. Can combine with any other size & style fit-ups for price breaks. Style #1. Runs on a watch battery, included.
Item #: 19859
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: Made in Asia. 3" x 3-7/16" x 1-1/8" thick with a 7/8" long handshaft. Maximum dial thickness is 7/16". Runs on one "C" battery which is not included There is no chiming feature. I-shaft hands...More Details »
Item #: 19432
Condition:
New
Price: $22.50
as low as: $21.75
12 or more
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group