Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Black spade hands for Hermle movements and others. With bushings. The minute hand is 5-1/2" long as measured from the center of the 2.0mm square mounting hole to the tip. 4.5mm bushed hour hand.
Item #: 20105
Condition:
New
Price: $12.00
Description: Brass Hermle barrel with a mainspring installed. The number #40 appears on the barrel.
Barrel OD: 38.0mm
Tooth Plate OD: 41.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 72
Item #: 14216
Condition:
New
Price: $38.00
as low as: $37.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #41 appears on the barrel.
Barrel OD: 43.0mm
Tooth Plate OD: 48.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 71
Item #: 14217
Condition:
New
Price: $43.00
as low as: $42.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #50 appears on the barrel.
Barrel OD: 41.0mm
Tooth Plate OD: 45.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 66
Item #: 14218
Condition:
New
Price: $50.00
as low as: $49.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #54 appears on the barrel.
Barrel OD: 49.0mm
Tooth Plate OD: 53.50mm
Total Barrel Height: 25.0mm
Number of Teeth: 80
Item #: 14219
Condition:
New
Price: $46.00
as low as: $45.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #55 appears on the barrel.
Barrel OD: 49.0mm
Tooth Plate OD: 53.50mm
Total Barrel Height: 25.0mm
Number of Teeth: 80
Item #: 14220
Condition:
New
Price: $46.00
as low as: $45.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #10 appears on the barrel.
Barrel OD: 45.0mm
Tooth Plate OD: 49.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 72
Item #: 14236
Condition:
New
Price: $50.00
as low as: $49.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #11 appears on the barrel.
Barrel OD: 45.0mm
Tooth Plate OD: 49.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 72
Item #: 14237
Condition:
New
Price: $43.00
as low as: $42.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. Replaces the #20 Hermle barrel. The number #21 appears on the barrel cap.
Barrel OD: 41.0mm
Tooth Plate OD: 47.50mm
Total Barrel Height: 21.0mm
Number of Teeth: 68
Item #: 14239
Condition:
New
Price: $52.00
as low as: $51.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #31 appears on the barrel.
Barrel OD: 36.5mm
Tooth Plate OD: 40.0mm
Total Barrel Height: 15.0mm
Number of Teeth: 70
Item #: 14241
Condition:
New
Price: $43.00
as low as: $42.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #32 appears on the barrel.
Barrel OD: 36.5mm
Tooth Plate OD: 40.0mm
Total Barrel Height: 15.0mm
Number of Teeth: 70
Item #: 14242
Condition:
New
Price: $38.00
as low as: $37.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #56 appears on the barrel.
Barrel OD: 41.0mm
Tooth Plate OD: 45.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 66
Item #: 14244
Condition:
New
Price: $38.00
as low as: $37.50
3 or more
Description: Brass Hermle barrel with a mainspring installed. The number #52 appears on the barrel.
Barrel OD: 41.0mm
Tooth Plate OD: 45.0mm
Total Barrel Height: 21.0mm
Number of Teeth: 66
Item #: 15958
Condition:
New
Price: $38.00
as low as: $37.50
3 or more
Description: Hermle barrel mainspring measures 17mm x 0.45mm x 1490mm. For #10 barrel & others.
Item #: 15921
Condition:
New
Price: $13.00
as low as: $12.75
3 or more
Description: Hermle barrel mainspring measures 17mm x 0.42mm x 1500mm. For #11 barrel & others.
Item #: 15922
Condition:
New
Price: $13.00
as low as: $12.75
3 or more
Description: Hermle barrel mainspring measures 17mm x 0.40mm x 1200mm. For #20 #21, #50. #56 and #58 barrels & others. Also used on Urgos UW06 Time & Strike.
Item #: 15924
Condition:
New
Price: $13.00
as low as: $12.75
3 or more
Description: Barrel mainspring measures 12mm x 0.34mm x 1150mm. For #31 barrel and others.
Item #: 15926
Condition:
New
Price: $11.00
as low as: $10.75
3 or more
Description: Hermle barrel mainspring measures 12mm x 0.42mm x 1100mm. For #30 and #32 barrels & others.
Item #: 15927
Condition:
New
Price: $11.00
as low as: $10.75
3 or more
Description: Barrel mainspring measures 12mm x 0.32mm x 1150mm. For #33 barrel & others.
Item #: 15928
Condition:
New
Price: $11.00
as low as: $10.75
3 or more
Description: Hermle barrel mainspring measures 17mm x 0.38mm x 1100mm. For #40 and #42 barrels & others.
Item #: 15929
Condition:
New
Price: $13.00
as low as: $12.75
3 or more
Description: Hermle barrel mainspring measures 21mm x 0.40mm x 1550mm. For #41 barrel & others.
Item #: 15930
Condition:
New
Price: $17.50
as low as: $17.25
3 or more
Description: Hermle barrel mainspring measures 17mm x 0.42mm x 1200mm. For #52 barrel & others.
Item #: 15933
Condition:
New
Price: $13.00
as low as: $12.75
3 or more
Description: Hermle barrel mainspring measures 21mm x 0.42mm x 1900mm. For #54 barrel& others.
Item #: 15934
Condition:
New
Price: $17.50
as low as: $17.25
3 or more
Description: Hermle barrel mainspring measures 21mm x 0.45mm x 1800mm. For #55 barrel & others.
Item #: 15935
Condition:
New
Price: $17.50
as low as: $17.25
3 or more
Description: 31.8mm long X 7.0mm diameter. Hermle combination arbor and insert for mainspring barrels. Used on #31, #32, & #33 barrels for W0130 and W0132 movements.
Item #: 19279
Condition:
New
Price: $5.50
Description: 37.5mm long X 7.0mm diameter. Hermle combination arbor and insert for mainspring barrels. Used on #31 & #33 barrels for W0131 movements
Item #: 19280
Condition:
New
Price: $5.50
Description: Hermle fork for balance wheel movements. Fits ##140, #150, and #340 movements.
Item #: 15498
Condition:
New
Price: $11.50
Description: 1-1/2" diameter brass finished bob with 2-1/8" rod. Split Hook end with rating nut. Made in India.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the...More Details »
Item #: 19810
Condition:
New
Price: $16.00
Description: 1-11/16" diameter brass bob with 3-1/16" rod. Hook end with rating nut.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 19812
Condition:
New
Price: $23.00
Description: 1-11/16" diameter brass bob with 3-1/2" rod. Split hook end with rating nut.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California...More Details »
Item #: 20118
Condition:
New
Price: $26.00
Description: 1-11/16" diameter brass bob with 4-1/2" rod. Split hook end with rating nut.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California...More Details »
Item #: 20119
Condition:
New
Price: $28.00
Description: 1-11/16" diameter brass bob with 2-3/4" rod. Split hook end with rating nut.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 10254
Condition:
New
Price: $16.00
Description: Metal spring for Hermle movements. .0200" (.5mm) thick 17.5mm / 8.0mm (length x width) 12.0mm / 0.04mm (hole-to-pin length & spring thickness) For Hermle Pendulums 11cm-15cm. 3.2mm Spring length.
Item #: 20803
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: Designed for snap-in Hermle 400-day quartz clock unit. Plastic block & fork..THE THICKNESS IS 0.03MM, OVER ALL LENGTH IS 3-3/8" AND 7/8" FROM THE BOTTOM OF THE TOP BLOCK TO THE FORK AND 2" FROM THE BOTTOM BLOCK TO THE FORK.
Item #: 23339
Condition:
New
Price: $10.00
Description: Used on Hermle #340-020, #1050-020, #350-060, #351-020, #351-030A, and #351-051. Strike second wheel is 1.14" diamerter x 1.43" long. 52 teeth on wheel, 10 teeth on pinion.
Item #: 11670
Condition:
New
Price: $14.00
Description: Used on Hermle #451-050 and #1151-050. Chime second wheel is 152" diameter x 1.40" long (38.6mm X 35.6mm). Smaller wheel is 1" diameter (25.4mm).
Item #: 14388
Condition:
New
Price: $14.00
Description: Clear plastic Hermle cable guard for movements is 39.5mm OD x 14.1mm Width (approx. 1-9/16" x 9/16").
Item #: 19824
Condition:
New
Price: $4.50
Description: Clear plastic Hermle cable guard for movements is 47.5mm OD x 20.7mm width (approx. 1-7/8" x 13/16").
Item #: 19825
Condition:
New
Price: $3.50
Description: Brass plated steel clock chain is 57" in length, has 47 links per foot and is made of 1.60mm wire. Used on Hermle #241, #451, #461, #1151 & #1161 movements & others.
Item #: 15889
Condition:
New
Price: $13.50
as low as: $13.25
2 or more
Description: Mounts movements in brackets. M3 diameter. Fits Hermle & other movements. 29mm overall length. With 22mm of thread.
Item #: 18325
Condition:
New
Price: $2.50
Description: Mounts movements in brackets. M3 diameter. Fits Hermle & other movements. 39mm overall length. With 32mm of thread.
Item #: 18326
Condition:
New
Price: $2.50
Description: Mounts movements in brackets. M3 diameter. Fits Hermle & other movements. 46mm overall length with 22mm of thread.
Item #: 20988
Condition:
New
Price: $2.50
Description: Mounts movements in brackets. M3 diameter. Fits Hermle & other movements. 61mm overall length with 32mm of thread.
Item #: 20989
Condition:
New
Price: $2.50
Description: Rectangular steel movement mounting washer for Hermle movements & others. 5/8" x 2". Made in Germany.
Item #: 19828
Condition:
New
Price: $2.50
Description: 13/16" round convex steel washer is used with movement mounting screws on Hermle movements & others. Made in Germany.
Item #: 20860
Condition:
New
Price: $1.50
Description: 12-piece assortment (2 different styles) of Hermle hand nuts for floor clocks. 9.0mm OD with a 2.5mm internal thread to fit a 2.5mm hand shaft. For Hermle movement #1171:
E008-008302 Brass
E008-008303 Blackened Brass
Item #: 19290
Condition:
New
Price: $12.50
Description: Brass plated steel clock chain is 78" in length, has 59 links per foot and is made of 0.90mm wire. Used on Hubert Herr 1-day cuckoo clocks.
Item #: 19612
Condition:
New
Price: $8.50
as low as: $8.25
2 or more
Description: Brass plated steel clock chain is 70" in length, has 45 links per foot and is made of 1.30mm wire. Used on Hubert Herr 8-day cuckoo clocks.
Item #: 19622
Condition:
New
Price: $16.00
as low as: $15.75
2 or more
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. (19 x 38). Metric equivalent is 19.0mm x 0.41mm x 1346mm.
Item #: 14317
Condition:
New
Price: $13.50
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 12.0mm x 0.38mm x 584mm.
Item #: 14205
Condition:
New
Price: $11.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 12.0mm x 0.33 mm x 686mm.
Item #: 14206
Condition:
New
Price: $11.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 12.0mm x 0.30mm x 1219mm.
Item #: 14207
Condition:
New
Price: $11.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 13.0mm x 0.36mm x 965mm.
Item #: 14208
Condition:
New
Price: $11.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 13.0mm x 0.56mm x 711mm.
Item #: 14209
Condition:
New
Price: $11.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 14.0mm x 0.33mm x 686mm.
Item #: 14210
Condition:
New
Price: $12.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. (14 x 28). Metric equivalent is 14.0mm x 0.41mm x 711mm.
Item #: 14211
Condition:
New
Price: $12.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. (14 x 30). Metric equivalent is 14.0mm x 0.36mm x 813mm.
Item #: 14212
Condition:
New
Price: $12.00
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. Metric equivalent is 18.0mm x 0.46mm x 1118mm.
Item #: 14314
Condition:
New
Price: $14.50
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. (19 x 36). Metric equivalent is 19.0mm x 0.43mm x 1143mm.
Item #: 14316
Condition:
New
Price: $13.50
as low as: $13.25
3 or more
Description: Hole end mainspring is designed for use in anniversary clocks, but can be used in others. (20 x 38). Metric equivalent is 20.0mm x 0.41mm x 1346mm.
Item #: 14318
Condition:
New
Price: $20.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group