- Home »
- Catalog »
- Clock Repair & Replacement Parts »
- Bezels, Bezels with Glass, Dial Pans, Hardware & Hinges, Bezel Tabs, Bezel Latches, Mounting Straps, Retainer Clips, Etc.
Timesavers - Bezels, Bezels with Glass, Dial Pans, Hardware & Hinges, Bezel Tabs, Bezel Latches, Mounting Straps, Retainer Clips, Etc.
Buy the exact sizes you need along with all of the appropriate hardware
Select a Sub-Category
A complete selection of glass & bezel tabs, clips, latches, hinges, etc.
Bezels, Bezels with Glass, Dial Pans, Hardware & Hinges, Bezel Tabs, Bezel Latches, Mounting Straps, Retainer Clips, Etc. Featured Products
Items 1-60 of 99
- Page 1 of 2
- Next
Description: 5-1/8" edge to edge diameter one piece bezel. Hinge, latch & glass tabs must be purchased separately (see Part #32969). Glass is not included. If you require convex glass, order #14065. If you...More Details »
Item #: 132311
Condition:
New
Price: $8.50
Description: Used on Hermle bezels with hinges requiring pins, but can use on other clocks. M5 external thread. 3mm internal hole for pins. 13.8mm overall length. 2 pieces/pack. Regularly $1.00. While supplies last.
Item #: 02640
Condition:
New
Price: $0.50
Description: 13” outside diameter. Bright polished finish. Regularly 33.00. While supplies last.
Item #: 90340
Condition:
New
Price: $16.50
Description: Brass bezel. With latch hinge & affixed. The hinge has two threaded pins (nuts not included). Can be used on other clocks. Regularly $40.00. While supplies last.
Item #: 90074
Condition:
New
Price: $20.00
Description: Exact copy of a Seth Thomas school clock bezel latch. For school clocks & long drop regulators. 1.67” (42.4mm) long x .470” (11.9mm) wide. High end height is .385” (9.78mm) tapering to...More Details »
Item #: 33979
Condition:
New
Price: $3.00
Description: Brass hinge component one left side & one right side. Regularly $3.00/set. While supplies last.
Item #: 01058
Condition:
New
Price: $1.00
Description: Polished brass. 5-5/8” outside diameter with 4 mounting holes in rim. 5” inside edge diameter. 3/8” height. Liner fits inside bezel increasing height to 5/8”. Can use on clocks as well....More Details »
Item #: 00688
Condition:
New
Price: $8.00
Description: 5-1/8" diameter brass plated steel dial pans are measured from edge to edge. Recessed to fit case openings. With a drilled center hole.
Item #: 33147
Condition:
New
Price: $14.75
Description: Brass hinge, latch & glass tabs. The small pack fits small bezels up to 6" diameter.
Item #: 32969
Condition:
New
Price: $2.00
Description: Brass hinge, latch & glass tabs. The large pack fits bezels 6" diameter & larger.
Item #: 33047
Condition:
New
Price: $2.50
Description: 135mm (5-5/16" approx.) Brass Finish Aluminum Bezel. Without hinge and latch. China.
Item #: 32988
Condition:
New
Price: $10.50
Description: 220mm brass finished steel bezel. Without hinge and latch. China.
Item #: 32989
Condition:
New
Price: $21.50
Description: 200mm(7-7/8")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 7" dial. China.
Item #: 32934
Condition:
New
Price: $5.50
Description: 180mm (7-1/16")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 6-1/2" dial. China.
Item #: 32933
Condition:
New
Price: $5.00
Description: 170mm (6-5/8")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 5-1/2" dial. China.
Item #: 32932
Condition:
New
Price: $4.50
Description: 135mm (5-5/16")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 4-1/2" dial. China.
Item #: 32930
Condition:
New
Price: $4.00
Description: 135mm (5-5/16")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 4-1/2" dial. China.
Item #: 32821
Condition:
New
Price: $7.00
Description: 200mm(7-7/8")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 7" dial. China.
Item #: 32825
Condition:
New
Price: $10.50
Description: 180mm (7-1/16")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 6-1/2" dial. China.
Item #: 32824
Condition:
New
Price: $9.50
Description: 170mm(6-5/8")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 5-1/2" dial. China.
Item #: 32823
Condition:
New
Price: $8.50
Description: 160mm (6-1/4")outside diameter. Approximate 7.5mm (.295”) recess depth. 10.3mm (.405”) drilled center hole with a raised rim. For a 5-1/4" dial. China.
Item #: 32822
Condition:
New
Price: $7.50
Description: 220mm (8-11/16" approx.) polished brass finished steel with hinge & latch riveted in place. China.
Item #: 32596
Condition:
New
Price: $22.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 1-1/8” with Convex Glass.
Item #: 29602
Condition:
New
Price: $22.50
Description: Pre-bent brass T-tabs measure 3/8"W x 7/16"T. 10 pieces per pack.
Item #: 23739
Condition:
New
Price: $3.00
Description: Pre-bent brass T-tabs measure 1/2"W x 5/8"T. 10 pieces per pack.
Item #: 23740
Condition:
New
Price: $3.00
Description: 3/8" wide x 3/8" tall brass bezel glass tabs. Pre-bent. 12 piece pack. For holding glass into bezels.
Item #: 23985
Condition:
New
Price: $3.00
Description: Formed brass latch is 2 inches long x 1/2 inches wide.
Item #: 23986
Condition:
New
Price: $0.75
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 4” with Convex Glass.
Item #: 29598
Condition:
New
Price: $21.50
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 4-1/2” with Convex Glass.
Item #: 29599
Condition:
New
Price: $21.75
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5” with Convex Glass.
Item #: 29601
Condition:
New
Price: $22.25
Description: Used to hold Seth Thomas #2 retainers.
Item #: 20808
Condition:
New
Price: $1.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5-3/8” with Convex Glass.
Item #: 29603
Condition:
New
Price: $22.75
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5-3/8” with Convex Glass.
Item #: 29604
Condition:
New
Price: $24.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5-1/2” with Convex Glass.
Item #: 29605
Condition:
New
Price: $25.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5-9/16” with Convex Glass.
Item #: 29606
Condition:
New
Price: $26.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5-5/8” with Convex Glass.
Item #: 29607
Condition:
New
Price: $26.50
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 5-3/4” with Convex Glass.
Item #: 29608
Condition:
New
Price: $27.50
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 6” with Convex Glass.
Item #: 29609
Condition:
New
Price: $28.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 6-1/4” with Convex Glass.
Item #: 29610
Condition:
New
Price: $32.00
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 6-3/8” with Convex Glass.
Item #: 29611
Condition:
New
Price: $32.00
Description: 6 each of 3 different brass glass tabs. 18 in a package.
Item #: 23343
Condition:
New
Price: $5.00
Description: Formed brass latch is 1-1/8 inches long x 5/16 inches wide.
Item #: 23987
Condition:
New
Price: $0.75
Description: One piece bezel. Hinge, latch & glass tabs must be purchased separately (see Part #33047). Glass is not included. If you require convex or flat glass to fit, just ask and we will double check to...More Details »
Item #: 23125
Condition:
New
Price: $34.50
Description: One piece bezel. Hinge, latch & glass tabs must be purchased separately (see Part #33047). Glass is not included. Measurement is outside diameter from edge to edge.
Item #: 23124
Condition:
New
Price: $34.50
Description: Now offering pre-assembled brass bezels with your choice of flat or convex glass. The bezel hinge is soldered in place as well. 6-1/2” with Convex Glass.
Item #: 29612
Condition:
New
Price: $32.50
Description: Use on German grandfather and grandmother movements. Can be used on others. Polished brass finished lyres, plain bobs and rods. #31002, #31003 and #31007 have straight rods. All others have twisted...More Details »
Item #: 31007
Condition:
New
Price: $58.00
Description: 6-3/8" diameter brass plated steel dial pans are measured from edge to edge. Recessed to fit case openings. With a drilled center hole. For kitchen clocks.
Item #: 13206
Condition:
New
Price: $18.00
Description: 2" long fancy brass bezel hinge for school clocks.
Item #: 10416
Condition:
New
Price: $5.50
Description: 1" wide x 5/8" long brass bezel latch. No soldering required. Just drill a hole in the bezel and install.
Item #: 10418
Condition:
New
Price: $4.00
Description: 3/8" wide x 1/2" tall brass bezel glass tabs. Pre-bent. 12 piece pack. For holding glass into bezels.
Item #: 17692
Condition:
New
Price: $3.00
Description: 8-7/8" diameter bezel and dial pan assembly has the hinge and latch soldered into plass. Glass tabs are included. Glass is not included.
Item #: 13248
Condition:
New
Price: $52.00
Description: 10-7/8" diameter bezel and dial pan assembly has the hinge and latch soldered into plass. Glass tabs are included. Glass is not included.
Item #: 13247
Condition:
New
Price: $54.50
Description: 12-5/8" diameter bezel and dial pan assembly has the hinge and latch soldered into plass. Glass tabs are included. Glass is not included.
Item #: 13246
Condition:
New
Price: $74.50
Description: 13-1/8" diameter bezel and dial pan assembly has the hinge and latch soldered into plass. Glass tabs are included. Glass is not included.
Item #: 13245
Condition:
New
Price: $76.50
Description: 4-3/4" diameter brass plated steel dial pans are measured from edge to edge. Recessed to fit case openings. With a drilled center hole.
Item #: 13213
Condition:
New
Price: $14.50
Description: 5" diameter brass plated steel dial pans are measured from edge to edge. Recessed to fit case openings. With a drilled center hole.
Item #: 13212
Condition:
New
Price: $14.50
Description: 5-1/4" diameter brass plated steel dial pans are measured from edge to edge. Recessed to fit case openings. With a drilled center hole.
Item #: 13211
Condition:
New
Price: $14.75
Items 1-60 of 99
- Page 1 of 2
- Next
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group