Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Old style 10 ft. brown rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Item #: 32044
Condition:
New
Price: $29.00
Description: 10 meters (32.8 feet) x 0.45mm (.0177") diameter. Many shop uses. China.
Item #: 30480
Condition:
New
Price: $2.00
Description: A-2 drill rod is air-hardening ground & polished. Replaces 0-1. Safer heat treating, less distortion during hardening & greater wear resistance. Machinability is equal to or better than 0-1. Medium...More Details »
Item #: 29354
Condition:
New
Price: $2.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0135" x 3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30980
Condition:
New
Price: $0.75
Description: Stepping sweep. Rear set. Combine with #33696, #33697, #20880, #20881 & #32462 for price breaks. Mini movement. 2-3/16” x 2-3/16” x 5/8”. Hand shaft 1-3/16". Max dial thickness 3/4". AA...More Details »
Item #: 14579
Condition:
New
Price: $3.00
as low as: $2.00
100 or more
Description: This brass finished bob is beautifully etched as shown. 1" Rear Slot. 7-1/8 Dia. 180mm. Fits many German & American clocks. Made in Asia.
Item #: 29408
Condition:
New
Price: $29.00
Description: Brown lacquered rod is 13-1/2" long (15-3/4" overall length from top hook hole to tip of rating assembly). Used on Waterbury & other clocks.
Item #: 30437
Condition:
New
Price: $14.00
Description: An 8-day hour and half-hour strike front mount movement. Length of pendulum drop from center of the handshaft to tip is 4-1/2. Hand shaft length is 1-1/2". Comes with winding key, 1-1/2 diameter...More Details »
Item #: 29489
Condition:
New
Price: $98.00
Description: From a small hoard of #2, 77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. Some...More Details »
Item #: 32040
Condition:
New
Price: $12.00
Description: 54mm weight filler fits 2-3/8" diameter weight shell. 5 lbs. with center hole. 4" height.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of...More Details »
Item #: 26005
Condition:
New
Price: $52.00
Description: 54mm filler fits 2-3/8" diameter weight shell. 4 lbs. with center hole. 2-3/4" height.
⚠️ WARNING: Contains chemicals that may cause cancer, birth defects, or reproductive harm for more information go to www.P65warnings.ca.gov.
Item #: 26004
Condition:
New
Price: $42.00
Description: 54mm diameter filler fits 2-3/8" diameter weight shell. 3 lbs. with center hole. 2-3/8" height.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the...More Details »
Item #: 26003
Condition:
New
Price: $32.00
Description: 1 pound weight filler is 54mm diameter to fit 60mm weight shells. 3/4" height.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California...More Details »
Item #: 26009
Condition:
New
Price: $14.50
Description: 1 pound filler is 48.4mm diameter to fit 50mm weight shells. 7/8" height.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 26008
Condition:
New
Price: $14.50
Description: 1 pound filler is 41.4mm diameter to fit 45mm weight shells. 1-3/8" height.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 26007
Condition:
New
Price: $14.50
Description: 1 pound filler is 38mm diameter to fit 40mm weight shells. 1-9/16" height.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 26006
Condition:
New
Price: $14.50
Description: Sold individually. 350 Grams cast iron. 454 grams = 1 pound. Made in Germany.
Item #: 26011
Condition:
New
Price: $10.25
Description: Sold individually. 1350 Grams cast iron. 454 grams = 1 pound. Made in Germany.
Item #: 26012
Condition:
New
Price: $31.00
Description: 12-19/32" long. Threaded on both ends. For weight shell #18221 & others.
Item #: 11716
Condition:
New
Price: $4.50
Description: Used on Morbier and tall case clocks. 3.0mm x 12 foot roll. Natural.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause...More Details »
Item #: 29448
Condition:
New
Price: $14.00
Description: 3.0mm x 12 foot roll of red cord is used on Morbier clocks. Made in England.
Item #: 29191
Condition:
New
Price: $15.00
Description: 2.5mm x 12 foot roll of natural cord is used on Morbier clocks. Made in England.
Item #: 29946
Condition:
New
Price: $12.00
Description: These cords are used on Morbier and tall case clocks. 2.0mm x 12 foot roll. Natural.
Item #: 29945
Condition:
New
Price: $11.50
Description: 11 foot roll of .055" diameter flexible strand brass cable for metal pulleys. 120 lbs. max weight.
Item #: 31034
Condition:
New
Price: $8.25
as low as: $8.00
3 or more
Description: Made in Germany 19.0mm / 5.0mm (length x width) 14.5mm / 0.05mm (hole-to-pin length & spring thickness)
Item #: 24683
Condition:
New
Price: $6.50
as low as: $6.25
3 or more
Description: Made in Germany 23.0mm / 10.0mm (length x width) 17.0mm / 0.05mm (hole-to-end of teardrop hole length & spring thickness). Used on Morbier clocks. No Pin.
Item #: 24696
Condition:
New
Price: $8.00
as low as: $7.75
3 or more
Description: Used on Urgos and other clocks. Made in Germany. 18.0mm / 8.0mm (length x width) 13.0mm / 0.04mm (hole-to-pin length & spring thickness).
Item #: 24687
Condition:
New
Price: $6.50
as low as: $6.25
3 or more
Description: 17"/18" long with .002 suspension feather. 12 pieces in a bundle.
Item #: 14422
Condition:
New
Price: $10.00
Description: A-2 drill rod is air-hardening ground & polished. Replaces 0-1. Safer heat treating, less distortion during hardening & greater wear resistance. Machinability is equal to or better than 0-1. Medium...More Details »
Item #: 29360
Condition:
New
Price: $5.75
Description: A-2 drill rod is air-hardening ground & polished. Replaces 0-1. Safer heat treating, less distortion during hardening & greater wear resistance. Machinability is equal to or better than 0-1. Medium...More Details »
Item #: 29358
Condition:
New
Price: $5.75
Description: A-2 drill rod is air-hardening ground & polished. Replaces 0-1. Safer heat treating, less distortion during hardening & greater wear resistance. Machinability is equal to or better than 0-1. Medium...More Details »
Item #: 29356
Condition:
New
Price: $3.75
Description: #13 (5.50mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23997
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: American Made. Blanks have no bores. For 2.0mm & 3.0mm plate thicknesses. 100 pc. assortment contains 10 pcs. each of sizes:
2.00mm height x 2.00mm OD
2.00mm height x 2.50mm OD
2.00mm height x...More Details »
Item #: 10518
Condition:
New
Price: $33.00
Description: Replacement 27-tooth brass drive gear for our #14600 Golden Hour Motor. Special tools are required to properly and safely remove your damaged drive gear and to install a new drive gear. We do not...More Details »
Item #: 29700
Condition:
New
Price: $8.00
Description: Brass bushings in both the hour and minute, blued steel hands. The minute hands measure 14.5mm (9/16”) from the center of the round hole 1.6mm bushed mounting hole to the tip. Hour hand has a 2.4mm round hole brass bushing.
Item #: 29751
Condition:
New
Price: $6.00
Description: Used on many old clocks. Bushed hour hand. 5-3/8" length as measured from center of square minute hand mounting hold to tip. Black finish. Sold in pairs.
5.5 mm hour hand bushing
3.3 mm minute hand square
Item #: 29488
Condition:
New
Price: $3.00
Description: Used on many old clocks. Bushed hour hand. 2-1/2" length of minute hand from center of mounting square to the tip. Sold in pairs.
Black finish.
3.40mm minute hand square opening
5.40mm hour hand bushing
Item #: 29486
Condition:
New
Price: $2.50
Description: Fits Hermle & other German clocks. Black hands with bushings. 2.5mm square minute hand bushing, 4.5mm round hour hand bushing. 3-7/16" from center of the mounting hole to the tip. Made in Asia.
Item #: 11538
Condition:
New
Price: $4.00
Description: Brass serpentine hands for Hermle mechanical movements & others have square mounting holes. The minute hand is 6-1/4" as measured from the center of the mounting hole to the tip. With 2.0mm...More Details »
Item #: 29018
Condition:
New
Price: $8.50
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered style hands have a 3-13/16" long minute hand as measured from...More Details »
Item #: 29033
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade style hands have a 6-7/8" long minute hand as measured from the...More Details »
Item #: 17110
Condition:
New
Price: $2.25
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal modern style hands have a 2=1/8" long minute hand as measured from the...More Details »
Item #: 17103
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: Unfinished spade I-shaft hands. Measures 8-1/8" from center of mounting hole to tip of minute hand. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Use with high torque quartz movements
Item #: 29175
Condition:
New
Price: $9.00
Description: Black tapered I-shaft hands. Measures 10" from center of mounting hole to tip of minute hand. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Use with high torque quartz movements.
Item #: 29157
Condition:
New
Price: $7.25
Description: #10 (4.75mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23994
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #11 (5.00mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23995
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #12 (5.25mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23996
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: 2.2mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24179
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: #4 (Swiss system size) large end with winding wing can be matched to any of our small ends to customize a double end key. Made in India.
Item #: 29166
Condition:
New
Price: $2.25
as low as: $2.00
6 or more
Description: #3 (Swiss system size) large end with winding wing can be matched to any of our small ends to customize a double end key. Made in India.
Item #: 29165
Condition:
New
Price: $2.25
as low as: $2.00
6 or more
Description: Brass small end can be used with any of the larger end keys with wings (#29165 through #29170) to create a custom double end key with Swiss sized ends. Made in India.
Item #: 24666
Condition:
New
Price: $1.25
as low as: $1.00
12 or more
Description: 2.6mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24181
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: 1.6mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
**Currently out of stock with no ETA**
Item #: 24176
Condition:
New
Not Available
Price: $1.00
as low as: $0.75
12 or more
Description: 1.8mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24177
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: 2.0mm small key end can be matched to a large end with a wing to make a custom double end key. (Replacement component of kit#29195)
Item #: 24178
Condition:
New
Price: $1.00
as low as: $0.75
12 or more
Description: #9 (4.50mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23993
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #6 (3.75mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India.
Item #: 23990
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #7 (4.00mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23991
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: #8 (4.25mm)crank has a steel shaft with a brass shank. The wood ball handle makes it easy to turn. Made in India. Combine with other sizes for quantity discount.
Item #: 23992
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: 4-pack of plastic leg leveling screws with T-nuts. Molded black plastic head is 1-1/16" in diameter. Screw is 1/4"-20 x 1" with a 5/16" matching T-nut. Drill a 5/16" hole, press in the T-nut.
Item #: 23851
Condition:
New
Price: $5.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group