Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Minute hand measures 95mm (3-3/4”) from center of oblong mounting hole to tip. Hour hand measures 2-3/4” (70mm) from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands...More Details »
Item #: 90151
Condition:
New
Price: $1.00
Description: 280mm x 350mm (11” wide x 15 9/16”) tall overall. Screened ivory with dark red flowers in corners. 10-3/8” time track. 10mm center hole. 9.25mm winding arbor holes on 5-11/16” centers....More Details »
Item #: 90055
Condition:
New
Price: $60.00
Description: 3-1/8" diameter. Polished brass finished aluminum. For quartz pendulum assemblies. 9/32” rear slot for rod, not included. Regularly $7.50. while supplies last.
Item #: 90232
Condition:
New
Price: $2.50
Description: Size 2.0mm is sold in 7 meter lengths (approximately 23 ft). Excellent quality blackened gut produced by the primary gut manufacturer in Asia.
Item #: 34197
Condition:
New
Price: $42.50
Description: Silk screened aluminum. 10mm center hole. “Franz Hermle & Sohn” logo above center hole. “Dual Chime” below the center hole. “Germany” indicated at dial bottom. Reg. $28.00. While supplies last.
Item #: 90089
Condition:
New
Price: $12.00
Description: 8-5/8” wide by 12” tall. 5-3/8” time track. Screened ivory with deep red flowers on heavy aluminum. Used on Hermle Model #22859. 9.25mm winding arbors on 3-11/16” centers. 10mm center hole....More Details »
Item #: 90093
Condition:
New
Price: $10.00
Description: Fits 60mm diameter weight shells. Place beneath weight shell weight filler to prevent damage & absorb sound. 3mm (.125”) thick. Regularly $1.00. While supplies last
Item #: 90282
Condition:
New
Price: $0.25
Description: 15.5mm offset width x 37.8mm offset length with .125” diameter mounting holes. 16.0mm offset height. Nickeled steel. Regularly $2.00. While supplies last.
Item #: 90192
Condition:
New
Price: $0.50
Description: 16.0mm offset width x 38.8mm offset length with .125” diameter mounting holes. 11.5mm offset height. Nickeled steel. Regularly $2.00. While supplies last.
Item #: 90191
Condition:
New
Price: $0.50
Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautiful brushed nickel bob measures 8-5/8” (220mm) diameter. Straight rods. Overall length is 42-1/2”. Made in...More Details »
Item #: 90224
Condition:
New
Price: $50.00
Description: 3-1/8” (80mm) outside diameter x 2-5/8” inside diameter metal speaker ring for Hermle quartz movements. Three 1/8” mounting holes. Regularly $2.00. While supplies last.
Item #: 90198
Condition:
New
Price: $1.00
Description: 11” time track. Brushed silver second ring sits on gold filigree center. Gold Arabic numerals on a brushed silver background. 9.5mm diameter arbor holes on 6-3/8” center. “BULOVA” imprinted...More Details »
Item #: 90073
Condition:
New
Price: $75.00
Description: Brushed nickel plated steel. Measures 4” (102mm) overall length. Used on Hermle clocks, but can use on others. Used on many floor clocks & other fine furniture. All holes are countersunk. Regularly $7.50. While supplies last.
Item #: 90016
Condition:
New
Price: $2.50
Description: Measures 40mm from center of oblong mounting hole to tip. Hour hand measures 1-1/16” (27mm) from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90278
Condition:
New
Price: $1.00
Description: Measures 75mm from center of oblong mounting hole to tip. Hour hand measures 2-1/16” (53mm) from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90161
Condition:
New
Price: $1.50
Description: Measures 40mm from center of oblong mounting hole to tip. Hour hand measures 1-3/16” (30mm) from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90277
Condition:
New
Price: $1.00
Description: Measures 46mm from center of oblong mounting hole to tip. Hour hand measures 1-7/16” (36mm) from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90276
Condition:
New
Price: $1.00
Description: Used on Junghans Swinger movements but can be used on other movements. 24.5mm approximate width.
Item #: 32910
Condition:
New
Price: $7.50
Description: Measures 3” from center of oblong minute hand mounting hole to tip. Hour hand measures 2” (50mm) from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90156
Condition:
New
Price: $1.50
Description: Unidentified Hermle #ZFHBB601. Brass. 3/4” wide. .175” diameter 2-hole section is 5/8” long. Slotted hole section is 7/16” long. 7/16” overall height. Regularly $2.00. While supplies last.
Item #: 90274
Condition:
New
Price: $1.00
Description: Brass finished aluminum with a 8mm wide rear slot. Regularly $4.50. While supplies last.
Item #: 90230
Condition:
New
Price: $2.25
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. Nickeled steel. For short center wheel. Regularly $2.00. While supplies last.
Item #: 90196
Condition:
New
Price: $0.50
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. Nickeled steel. For short center shaft. Regularly $2.00. While supplies last.
Item #: 90195
Condition:
New
Price: $0.50
Description: Fits 3/16” (.187") hole x 1/2” deep. Flat section is .305” wide x 7/16” long. Overall length is 15/16”. Zinc & yellow plated steel. Used on Hermle curio cabinets but can use as needed. Regularly $2.00.
Item #: 90024
Condition:
New
Price: $0.50
Description: Used on Hermle clocks, but can use as needed. Zinc plated. Regularly $2.50. While supplies last.
Item #: 90113
Condition:
New
Price: $1.00
Description: Used on Hermle clocks, but can use as needed. Zinc plated. Regularly $2.50. While supplies last.
Item #: 90114
Condition:
New
Price: $1.00
Description: For Hermle quartz movements. Note Hermle quartz hands only fit Hermle quartz movements. Minute hand measures 120mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90158
Condition:
New
Price: $1.75
Description: For Hermle quartz movements. Note Hermle quartz hands only fit Hermle quartz movements. Minute hand measures 103mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90144
Condition:
New
Price: $1.75
Description: For mechanical movements. Can use on other clocks. Measures 140mm from center of 2.25mm square minute hand mounting hole to tip. Hour hand measures 4-1/4” from center of bushed 4.5mm round hole...More Details »
Item #: 90272
Condition:
New
Price: $3.75
Description: Now including the locking lever screw. Replace worn or damaged governor & still keep the same tune in your customer's clock. Tooth count indicates the number of teeth on the comb. New style unit...More Details »
Item #: 34191
Condition:
New
Price: $21.50
Description: 2 tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 22-teeth with improvement in...More Details »
Item #: 34190
Condition:
New
Price: $52.50
Description: Solid brass column base is 1” square. Accommodates 11/16” (.687”) diameter columns. 5/16” tall. Used on Hermle clocks, but can use on others. Regularly $6.00. While supplies last.
⚠️...More Details »
Item #: 90009
Condition:
New
Price: $3.00
Description: For Hermle quartz movements. Note that Hermle quartz hands fit Hermle quartz movements only. Minute hand measures 63mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90146
Condition:
New
Price: $2.25
Description: For Hermle quartz movements. Note that Hermle quartz hands fit Hermle quartz movements only. Minute hand measures 75mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90165
Condition:
New
Price: $2.25
Description: Silk screened aluminum. 10mm center hole. “Hermle” logo above center hole. “Germany” indicated at dial bottom. Reg. $14.00. While supplies last.
Item #: 90092
Condition:
New
Price: $7.00
Description: Use as case back on small clocks. 1/8” thick x 7-7/16” wide x 9-1/4” overall height. The height is 7" from the bottom to the top of either side. Black on one side, dark brown on the other...More Details »
Item #: 90031
Condition:
New
Price: $1.50
Description: 2-5/8” long nickel plated steel hinge. Used on Hermle clocks but can be used on other cabinets & doors. Regularly $7.50. While supplies last.
Item #: 90025
Condition:
New
Price: $3.75
Description: Used on Hermle clocks, but can use on anything. Plated with a dark grey finish. Regularly $2.50. While supplies last.
Item #: 90115
Condition:
New
Price: $1.00
Description: Silk screened aluminum. Ivory dial with specks of black. 10mm center hole. “Hermle” logo above center hole. “Dual Chime” below the center hole. “Germany” indicated at dial bottom. Reg. $28.00. While supplies last.
Item #: 90085
Condition:
New
Price: $12.00
Description: Use as case back on small clocks. 1/8” thick x 7-7/16” wide x 9-1/4” overall height. Black on one side, oak on the other side. Can cut to size. Used on Hermle clocks, but can use on others. Reg: $3.00. While supplies last.
Item #: 90270
Condition:
New
Price: $1.50
Description: Used on Hermle curio cabinets & other cabinetry, doors & drawers. Nickeled brass key face plate. 11/16” diameter cast zinc cylinder for up to 3/8” thick doors or drawers. 1-1/4” from center...More Details »
Item #: 90021
Condition:
New
Price: $6.25
Description: Loop end mainspring measures .338” (21/64" approx) x .016" x 60". Metric equivalent is 8.6mm x 0.41mm x 1524mm.
Item #: 02555
Condition:
New
Price: $8.00
Description: 32mm x 150mm (1-1/8" x 6"). Polished silver finished aluminum. With center rod, top hook, and bottom nib. China.
Item #: 33722
Condition:
New
Price: $6.00
Description: Brass fork used on Hettich electric torsion clocks. 2.0mm Mounting Hole. 11.0mm from center of mounting hole to end. 14.0mm overall length. Germany. Regularly $8.00/ each. While supplies last....More Details »
Item #: 33721
Condition:
New
Price: $2.00
Description: 23mm hand shaft (29/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/2". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33877
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 17/32" long hand shaft. Max dial thickness of 1/4". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33770
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/32" long hand shaft. Max dial thickness of 3/16". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33889
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: 17mm hand shaft (21/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/4". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33876
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: Cast pot metal, brass plated. For floor & wall clocks & other fine furniture. Made in China. 5-1/8" L x 7/8" W
⚠️ WARNING: This product can expose you to chemicals including lead, which is...More Details »
Item #: 33725
Condition:
New
Price: $4.50
Description: 13mm hand shaft (1/2"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/8". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33875
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: Brass fork used on Hettich electric torsion clocks. 1.3mm Mounting Hole. 16.0mm from center of mounting hole to end. 19.0mm overall length. Germany. Regularly $8.00/ each. While supplies last....More Details »
Item #: 33718
Condition:
New
Price: $2.00
Description: Blackened. Used on many American clocks, but can use on others. Minute hand measures 5-1/8” from center of 2.5mm wide oblong mounting hole to tip. Hour hand is bushed with a 5.0mm diameter mounting hole.
Item #: 33717
Condition:
New
Price: $3.25
Description: 9-5/8" Convex round clock glass. Combine with any other convex or flat glass for applicable quantity discounts. WHILE SUPPLIES LAST!
Item #: 33713
Condition:
New
Price: $6.00
Description: 10-7/8” diameter flat clock glass. Combine with any other convex or flat glass for applicable quantity discounts.
Item #: 33712
Condition:
New
Price: $7.50
as low as: $7.00
12 or more
Description: White plastic. No mounting holes allow custom fitting. Minute hand measures 3-1/8” (80mm approx) from center of to tip. Fits 160mm (6-1/4”) dials.
Item #: 33765
Condition:
New
Price: $2.25
Description: Off white plastic. Minute hand measures 1-7/8” (47.5mm approx) from center of of where the hole should be to the tip. Fits 100mm (4”) dials. No mounting hole in either hand.
Item #: 33762
Condition:
New
Price: $1.75
Description: White plastic. Minute hand measures 2-1/4” (57mm approx) from center of 2.50mm mounting to tip. Fits 120mm (4-3/4”) dials. No mounting hole in hour or minute hand.
Item #: 33763
Condition:
New
Price: $1.75
Description: White plastic. Minute hand measures 1-11/16” (43mm approx) from approx. center of minute hand mounting location to tip. Fits 90mm (3-1/2”) dials. No mounting holes in hour or minute hand allows for custom fitting.
Item #: 33760
Condition:
New
Price: $1.00
Description: Brass plated steel clock chain is 72" in length, has 36 links per foot and is made of 1.80mm dia. While Supplies Last.
Item #: 33747
Condition:
New
Price: $12.00
as low as: $11.75
2 or more
Description: Brass plated steel clock chain is 72" in length, has 39 links per foot and is made of 1.80mm wire.
Item #: 33748
Condition:
New
Price: $13.00
as low as: $12.75
2 or more
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group