Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Used on Hermle clocks, but can use as needed. Zinc plated. Regularly $2.50. While supplies last.
Item #: 90114
Condition:
New
Price: $1.00
Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautifully embossed brass bob measures 10-5/8” (270mm) diameter. Straight rods. Overall length is 43”. Made in...More Details »
Item #: 90215
Condition:
New
Price: $80.00
Description: For Hermle quartz movements. Note Hermle quartz hands only fit Hermle quartz movements. Minute hand measures 120mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90158
Condition:
New
Price: $1.75
Description: For Hermle quartz movements. Note Hermle quartz hands only fit Hermle quartz movements. Minute hand measures 103mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90144
Condition:
New
Price: $1.75
Description: Measures 4” from center of oblong minute hand mounting hole to tip. Hour hand measures 2-7/8” from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90163
Condition:
New
Price: $1.75
Description: For mechanical movements. Can use on other clocks. Measures 140mm from center of 2.25mm square minute hand mounting hole to tip. Hour hand measures 4-1/4” from center of bushed 4.5mm round hole...More Details »
Item #: 90272
Condition:
New
Price: $3.75
Description: Replace worn or damaged governor & still keep the same tune in your customer's clock. Tooth count indicates the number of teeth on the comb. New style unit mounting holes may have to be filed to...More Details »
Item #: 34191
Condition:
New
Price: $20.50
Description: 2 tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 22-teeth with improvement in...More Details »
Item #: 34190
Condition:
New
Price: $52.50
Description: For Hermle quartz movements. Note that Hermle quartz hands fit Hermle quartz movements only. Minute hand measures 63mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90146
Condition:
New
Price: $2.25
Description: For Hermle quartz movements. Note that Hermle quartz hands fit Hermle quartz movements only. Minute hand measures 75mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90165
Condition:
New
Price: $2.25
Description: Silk screened aluminum. 10mm center hole. “Hermle” logo above center hole. “Germany” indicated at dial bottom. Reg. $14.00. While supplies last.
Item #: 90092
Condition:
New
Price: $7.00
Description: 2-5/8” long nickel plated steel hinge. Used on Hermle clocks but can be used on other cabinets & doors. Regularly $7.50. While supplies last.
Item #: 90025
Condition:
New
Price: $3.75
Description: Used on Hermle clocks, but can use on anything. Plated with a dark grey finish. Regularly $2.50. While supplies last.
Item #: 90115
Condition:
New
Price: $1.00
Description: Brass finished aluminum with a 10mm wide rear slot. Used on Hermle clocks but can use on others. Regularly $4.00. While supplies last.
Item #: 90229
Condition:
New
Price: $2.00
Description: Silk screened aluminum. Ivory dial with specks of black. 10mm center hole. “Hermle” logo above center hole. “Dual Chime” below the center hole. “Germany” indicated at dial bottom. Reg. $28.00. While supplies last.
Item #: 90085
Condition:
New
Price: $12.00
Description: Ivory dial with Roman numberals. 5-3/8” time track. Hinged brass bezel. 10mm center hole. “Hermle” logo above center hole. “Made in Germany” indicated at dial bottom. Reg. $25.00 While supplies last
Item #: 90079
Condition:
New
Price: $12.50
Description: Use as case back on small clocks. 1/8” thick x 7-7/16” wide x 9-1/4” overall height. Black on one side, oak on the other side. Can cut to size. Used on Hermle clocks, but can use on others. Reg: $3.00. While supplies last.
Item #: 90270
Condition:
New
Price: $1.50
Description: Use as case back on small clocks. 1/8” thick x 7-7/16” wide x 9-1/4” overall height. Black on one side, dark brown on the other side. Can cut to size. Used on Hermle clocks, but can use on others. Reg: $3.00. While supplies last.
Item #: 90031
Condition:
New
Price: $1.50
Description: Solid brass column base is 1” square. Accommodates 11/16” (.687”) diameter columns. 5/16” tall. Used on Hermle clocks, but can use on others. Regularly $6.00. While supplies last.
⚠️...More Details »
Item #: 90009
Condition:
New
Price: $3.00
Description: Used on Hermle curio cabinets & other cabinetry, doors & drawers. Nickeled brass key face plate. 11/16” diameter cast zinc cylinder for up to 3/8” thick doors or drawers. 1-1/4” from center...More Details »
Item #: 90021
Condition:
New
Price: $6.25
Description: Used on Gilbert clocks, but can use on others. #7/#0000 (#3.8mm/1.8mm) nickeled steel. New, old stock. India. Regularly $3.00. While supplies last.
Item #: 02588
Condition:
New
Price: $1.00
Description: Loop end mainspring measures .338” (21/64" approx) x .016" x 60". Metric equivalent is 8.6mm x 0.41mm x 1524mm.
Item #: 02555
Condition:
New
Price: $8.00
Description: Cast pot metal, brass plated. For floor & wall clocks & other fine furniture. Made in China. 5-1/8" L x 7/8" W
⚠️ WARNING: This product can expose you to chemicals including lead, which is...More Details »
Item #: 33725
Condition:
New
Price: $4.50
Description: 23mm hand shaft (29/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/2". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33877
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: 17mm hand shaft (21/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/4". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33876
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: 13mm hand shaft (1/2"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/8". Continuous sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 33875
Condition:
New
Price: $3.75
as low as: $3.00
50 or more
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
25/32” (20mm) Hand Shaft Length & 5/16” Max Dial Thickness. Mounting hardware included. Uses I-Shaft...More Details »
Item #: 33773
Condition:
New
Price: $5.25
as low as: $4.50
12 or more
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
21/32” (17mm) Hand Shaft Length & 1/4” Max Dial Thickness. Mounting hardware included. Uses I-Shaft...More Details »
Item #: 33772
Condition:
New
Price: $5.25
as low as: $4.50
12 or more
Description: 8-steel rod chime unit with a cast iron vertical base for Westminster movements. Longest rod is 26".
Item #: 33750
Condition:
New
Price: $52.50
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Measures 1-7/16" W x 2-3/4" L (37mm x 70mm). China.
Item #: 33742
Condition:
New
Price: $4.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Measures 1-5/16" W x 2-5/16" L (34mm x 60mm). China.
Item #: 33743
Condition:
New
Price: $3.75
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33740
Condition:
New
Price: $2.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33738
Condition:
New
Price: $4.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33737
Condition:
New
Price: $3.25
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33736
Condition:
New
Price: $3.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33734
Condition:
New
Price: $4.00
Description: Brass plated steel. Used on floor and wall clock cases and other fine furniture. Dimension shown is overall length. China.
Item #: 33735
Condition:
New
Price: $3.00
Description: 2-7/8" long. 1-1/8" shaft length. 1-5/16" head diameter. 5/16" flange length. Fits #33741 lock & others. .2385" outside shaft diameter , 0.15" inside shaft diameter
⚠️ WARNING: This product...More Details »
Item #: 33727
Condition:
New
Price: $4.00
Description: Brass plated steel clock chain is 72" in length, has 39 links per foot and is made of 1.80mm wire.
Item #: 33748
Condition:
New
Price: $13.00
as low as: $12.75
2 or more
Description: Brass plated steel clock chain is 72" in length, has 38 links per foot and is made of 1.60mm wire.
Item #: 33747
Condition:
New
Price: $12.00
as low as: $11.75
2 or more
Description: Brass plated steel clock chain is 72" in length, has 40.5 links per foot and is made of 1.40mm wire.
Item #: 33746
Condition:
New
Price: $12.50
as low as: $12.25
2 or more
Description: White plastic. No mounting holes allow custom fitting. Minute hand measures 3-1/8” (80mm approx) from center of to tip. Fits 160mm (6-1/4”) dials.
Item #: 33765
Condition:
New
Price: $2.25
Description: White plastic. Minute hand measures 2-1/4” (57mm approx) from center of 2.50mm mounting to tip. Fits 120mm (4-3/4”) dials. No mounting hole in hour or minute hand.
Item #: 33763
Condition:
New
Price: $1.75
Description: Off white plastic. Minute hand measures 1-7/8” (47.5mm approx) from center of of where the hole should be to the tip. Fits 100mm (4”) dials. No mounting hole in either hand.
Item #: 33762
Condition:
New
Price: $1.75
Description: White plastic. Minute hand measures 1-11/16” (43mm approx) from approx. center of minute hand mounting location to tip. Fits 90mm (3-1/2”) dials. No mounting holes in hour or minute hand allows for custom fitting.
Item #: 33760
Condition:
New
Price: $1.00
Description: Off-white plastic. Minute hand measures 1-3/8” (35mm approx) from approx. center of minute hand mounting location to tip. Fits 75mm (3”) dials. No mounting holes in hour or minute hand allows for custom fitting.
Item #: 33759
Condition:
New
Price: $1.00
Description: White plastic. Minute hand measures 3-5/16” (79.5mm approx) from center of mounting hole area to tip. Fits 170mm/180mm (6-3/4”/7”) dials. No mounting hole in hour & minute hands allows custom fitting.
Item #: 33758
Condition:
New
Price: $2.25
Description: White plastic. Minute hand measures 3-5/16” (79.5mm approx) from center of 2.50mm square hole mounting bushing to tip. 6.4mm round mounting hole in hour hand. Fits 170mm/180mm (6-3/4”/7”) dials.
Item #: 33757
Condition:
New
Price: $2.25
Description: Old style 10 ft. gold rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Item #: 33752
Condition:
New
Price: $29.00
Description: Narrow door lock is ideal for grandfather clocks. Fits left or right
hand door. Nickel finish. 13/16 inches wide x 2-3/4 inches tall x 5/16" deep. With brass plated key. NOTE: Key style may vary....More Details »
Item #: 33749
Condition:
New
Price: $10.00
Description: 5-1/8” L x 7/8” W. Cast zinc with brass plating. For floor & wall clocks & other fine furniture. China.
⚠️ WARNING: Contains chemicals that may cause cancer, birth defects, or...More Details »
Item #: 33726
Condition:
New
Price: $5.50
Description: 4-5/8” diameter round wire gong with 2-1/8” x 1-11/16” cast iron base. China.
Item #: 33724
Condition:
New
Price: $7.50
Description: 32mm x 150mm (1-1/8" x 6"). Polished silver finished aluminum. With center rod, top hook, and bottom nib. China.
Item #: 33722
Condition:
New
Price: $6.00
Description: Brass fork used on Hettich electric torsion clocks. 2.0mm Mounting Hole. 11.0mm from center of mounting hole to end. 14.0mm overall length. Germany. Regularly $8.00/ each. While supplies last....More Details »
Item #: 33721
Condition:
New
Price: $2.00
Description: Brass fork used on Hettich electric torsion clocks. 1.3mm Mounting Hole. 16.0mm from center of mounting hole to end. 19.0mm overall length. Germany. Regularly $8.00/ each. While supplies last....More Details »
Item #: 33718
Condition:
New
Price: $2.00
Description: Blackened. Used on many American clocks, but can use on others. Minute hand measures 5-1/8” from center of 2.5mm wide oblong mounting hole to tip. Hour hand is bushed with a 5.0mm diameter mounting hole.
Item #: 33717
Condition:
New
Price: $3.25
Description: Mainwheel clickspring used in Seth Thomas #2 movements. 35mm length and 15mm between pins measured on the curve.
Item #: 33714
Condition:
New
Price: $6.00
Description: 10-7/8” diameter flat clock glass. Combine with any other convex or flat glass for applicable quantity discounts.
Item #: 33712
Condition:
New
Price: $7.50
as low as: $7.00
12 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 7/32" long hand shaft. Max dial thickness of 3/16". Uses one "AA" battery which is not included. Has an alarm feature. Continuous sweep. Complete...More Details »
Item #: 33889
Condition:
New
Price: $7.50
as low as: $6.75
12 or more
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
29/32” (23mm) Hand Shaft Length & 7/16” Max Dial Thickness. Mounting hardware included. Uses I-Shaft...More Details »
Item #: 34171
Condition:
New
Price: $5.25
as low as: $4.50
12 or more
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group