Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: 7-1/2" long. Stamped brass. With 2 mounting standoffs.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth...More Details »
Item #: 13583
Condition:
New
Price: $24.00
Description: Stamped brass beat scale. 3" long. For Waterburys and other clocks.
Item #: 29391
Condition:
New
Price: $4.25
Description: 8mm O.D. x 56.5mm long glass tube for use on No. 10247 mercury pendulum
Item #: 32131
Condition:
New
Price: $4.00
Description: Made in Germany. 14.5mm / 8.0mm (length x width) 10.5mm / 0.04mm (hole-to-pin length & spring thickness). Used on Jauch clocks.
Item #: 24688
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.204" x 3-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30556
Condition:
New
Price: $2.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.039" x 1-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30961
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.038" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30962
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.036" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30964
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.035" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30965
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.033" x 1-3/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30966
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0292" x 1-3/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30969
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.201" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30557
Condition:
New
Price: $2.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.028" x 1-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30970
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.026" x 1-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30971
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.025" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30972
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0225" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30974
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.021" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30975
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.020" x 7/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30976
Condition:
New
Price: $0.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.018" x 7/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30977
Condition:
New
Price: $0.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.016" x 7/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30978
Condition:
New
Price: $0.75
Description: The highest quality natural gut available. Sold in 5 meter length (approximately 16-1/4 feet).
Item #: 23757
Condition:
New
Price: $12.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.199" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30558
Condition:
New
Price: $2.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.196" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30559
Condition:
New
Price: $2.25
Description: Natural gut 0.60mm. Sold in 5 meter length (approximately 16-1/4 feet).
Item #: 23756
Condition:
New
Price: $11.50
Description: Assortment of hollow brass tube is ideal for bushings. OD 11.00mm ID 7.50mm, OD 9.50mm ID 6.33mm, OD 7.90mm ID 4.30mm, OD 6.30mm ID 2.70mm, OD 4.70mm ID 3.40mm. OD 3.90mm ID 2.80mm, OD 3.15mm ID 1.75mm, OD 2.50mm ID 0.65mm. All are 3-1/8" long.
Item #: 23885
Condition:
New
Price: $12.50
Description: 4-1/2" long steel rod. .0275"(0.70mm) to .1575 (4.0mm) diameters. 37 piece pack. India.
Item #: 23801
Condition:
New
Price: $8.50
Description: 12 coil set of medium hard brass wire includes one coil each of B & S gauge sizes 18 to 30. India. The coils are approximately 12-18" for the larger diameter wire and up to 7' for the smaller diameter wire.
Item #: 23908
Condition:
New
Price: $11.50
Description: 6" long brass wire. .025" (0.6mm) to .156 (4mm) diameters. 37 piece pack. India.
Item #: 23800
Condition:
New
Price: $8.50
Description: The highest quality natural gut available. Size 0.5mm is sold in 1.20 meter lengths (approximately 4-1).
Item #: 29775
Condition:
New
Price: $5.00
Description: Soft brass. Use where workability is important. 1 oz. spools. 22 Gauge (.0253).
Item #: 29532
Condition:
New
Price: $17.25
Description: Soft brass. Use where workability is important. 1 oz. spools. 24 Gauge (.0201).
Item #: 29533
Condition:
New
Price: $12.50
Description: .004" thick. 12 in a bundle. 6" Long.
Item #: 29386
Condition:
New
Price: $7.50
Description: 25 piece assortment of varying lengths and thicknesses. Made in India.
Item #: 29464
Condition:
New
Price: $4.50
Description: Made in Germany. 19.5mm / 8.0mm (length x width) 15.0mm / 0.05 mm (hole-to-pin length & spring thickness). 2 Holes
Item #: 24686
Condition:
New
Price: $5.00
as low as: $4.75
3 or more
Description: Used on many 30 hour tall case clocks. 80.0mm long arbor.
Item #: 29721
Condition:
New
Price: $22.00
Description: Hardwood. Requires final sanding & finishing. 16" measurement is at widest point. Finial style may vary.
Item #: 23755
Condition:
New
Price: $50.00
Description: 76-1/2" long x 1.0mm (.040") diameter brass weight cable with brass fittings. Used on Hermle movements and others. Made in the USA.
Item #: 29180
Condition:
New
Price: $8.75
Description: 6 pcs. of brass cable ends for Urgos cable. Used on Urgos cable and others. Made in the USA.
Item #: 29178
Condition:
New
Price: $3.25
Description: 6 pcs of cable fittings for Kieninger cable. Made in the USA.
Item #: 29179
Condition:
New
Price: $3.25
Description: Flexible stranded cable for metal pulleys. 5/64" x 1000 foot roll. 300 lbs. max weight.
Item #: 23707
Condition:
New
Price: $597.00
Description: Flexible stranded cable for metal pulleys. 3/64" x 1000 foot roll. 85 ;bs. max weight.
Item #: 23705
Condition:
New
Price: $350.00
Description: Brass cable ends for German clocks. 5 pcs. each of 4 different styles. Suitable for Hermle, Kieninger, and Urgos cable. Made in the USA.
Item #: 29177
Condition:
New
Price: $9.00
Description: Flexible stranded cable for metal pulleys. 1.0mm (.040") diameter x 11 foot roll. 75 lbs. max weight.
Item #: 23728
Condition:
New
Price: $7.25
as low as: $7.00
3 or more
Description: Flexible stranded cable for metal pulleys. 1.0mm (.040") x 1000 foot roll. 75 lbs. max weight.
Item #: 23730
Condition:
New
Price: $350.00
Description: Flexible stranded cable for metal pulleys. 1.0mm (.040") diameter x 100 foot roll. 75 lbs. max weight.
Item #: 23729
Condition:
New
Price: $45.00
Description: Flexible stranded cable for metal pulleys. 1/32" x 1000 foot roll. 40 lbs. max weight.
Item #: 23704
Condition:
New
Price: $465.00
Description: Flexible stranded cable for metal pulleys. 1/16" x 1000 foot roll. 150 lbs. max weight.
Item #: 23706
Condition:
New
Price: $465.00
Description: 1000 foot roll of .055" diameter flexible strand brass cable for metal pulleys. 120 lbs. max weight.
Item #: 31064
Condition:
New
Price: $465.00
Description: 100 foot roll of .055" diameter flexible strand brass cable for metal pulleys. 120 lbs. max weight.
Item #: 31063
Condition:
New
Price: $53.00
Description: German made. For Kundo electronic clocks 16.0mm / 17.0mm (length x width) 9.0mm / 0.04mm (hole-to-hole length & spring thickness). No Pin.
Item #: 12070
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: Used on Urgos & other clocks. Made in Germany. 25.5mm / 11.0mm (length x width) 17.5mm / 0.04mm (hole-to-pin length & spring thickness).
Item #: 24689
Condition:
New
Price: $9.50
as low as: $9.25
3 or more
Description: Made in Germany. 27.0mm / 12.0mm (length x width) 16.0mm / 0.06mm (hole-to-pin length & spring thickness)
Item #: 24690
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: Made in Germany. 24.0mm / 12.0mm (length x width) 15.0mm / 0.10mm (hole-to-pin length & spring thickness). Used on Kieninger clocks.
Item #: 24692
Condition:
New
Price: $10.00
as low as: $9.75
3 or more
Description: Made in Germany. 17.5mm / 8.0mm (length x width) 12.0mm / 0.08mm (hole-to-pin length & spring thickness). Used on Kieninger clocks.
Item #: 24693
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: Made in Germany. 24.5mm / 12.0mm (length x width) 17.5mm / 0.10mm (hole-to-end of teardrop hole length & spring thickness). Used on Morbier clocks. No Pin.
Item #: 24694
Condition:
New
Price: $11.50
as low as: $11.25
3 or more
Description: German made. 20.0mm / 5.0mm (length x width) 15.5mm / 0.05mm (hole-to-pin length & spring thickness)
Item #: 24695
Condition:
New
Price: $8.00
as low as: $7.75
3 or more
Description: Made in Germany. 14.5mm / 6.0mm (length x width) 10.5mm / 0.04mm (hole-to-pin length & spring thickness). Plastic.
Item #: 24685
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Price: $19.50
Description: 1-1/4" long x .194" wide x .003" thick. Brass top.
Item #: 24532
Condition:
New
Price: $2.00
Description: This 0.15mm wire diameter silver contact spring has a 4mm end loop and 2mm diameter coils. The spring is fitted to the Bulle with one end attached to the end of the fork arbor and the other by a...More Details »
Item #: 23803
Condition:
New
Price: $43.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group