Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.073" x 2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30949
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.2055" x 3-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30555
Condition:
New
Price: $2.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.067" x 2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30951
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0465" x 1-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30956
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.042" x 1-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30958
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.204" x 3-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30556
Condition:
New
Price: $2.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.039" x 1-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30961
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.038" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30962
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.036" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30964
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.035" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30965
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.033" x 1-3/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30966
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0292" x 1-3/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30969
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.201" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30557
Condition:
New
Price: $2.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.028" x 1-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30970
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.026" x 1-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30971
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.025" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30972
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0225" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30974
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.021" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30975
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.020" x 7/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30976
Condition:
New
Price: $0.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.016" x 7/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30978
Condition:
New
Price: $0.75
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.199" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30558
Condition:
New
Price: $2.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.196" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30559
Condition:
New
Price: $2.25
Description: 4.0mm large key end with a wing for turning can be matched to a small end to make a custom double end key. (Replacement component of kit#29195)
Item #: 29200
Condition:
New
Price: $2.25
as low as: $2.00
5 or more
Description: 3.8mm large key end with a wing for turning can be matched to a small end to make a custom double end key. (Replacement component of kit#29195)
CURRENTLY UNAVAILABLE!
Item #: 29199
Condition:
New
Not Available
Price: $2.25
as low as: $2.00
5 or more
Description: 3.6mm large key end with a wing for turning can be matched to a small end to make a custom double end key. (Replacement component of kit#29195)
CURRENTLY UNAVAILABLE.
Item #: 29198
Condition:
New
Not Available
Price: $2.25
as low as: $2.00
5 or more
Description: 3.4mm large key end with a wing for turning can be matched to a small end to make a custom double end key. (Replacement component of kit#29195)
Item #: 29197
Condition:
New
Price: $2.25
as low as: $2.00
5 or more
Description: 3.2mm large key end with a wing for turning can be matched to a small end to make a custom double end key. (Replacement component of kit#29195)
Item #: 29196
Condition:
New
Price: $2.25
as low as: $2.00
5 or more
Description: Assortment of hollow brass tube is ideal for bushings. OD 11.00mm ID 7.50mm, OD 9.50mm ID 6.33mm, OD 7.90mm ID 4.30mm, OD 6.30mm ID 2.70mm, OD 4.70mm ID 3.40mm. OD 3.90mm ID 2.80mm, OD 3.15mm ID 1.75mm, OD 2.50mm ID 0.65mm. All are 3-1/8" long.
Item #: 23885
Condition:
New
Price: $12.50
Description: 4-1/2" long steel rod. .0275"(0.70mm) to .1575 (4.0mm) diameters. 37 piece pack. India.
Item #: 23801
Condition:
New
Price: $8.50
Description: 12 coil set of medium hard brass wire includes one coil each of B & S gauge sizes 18 to 30. India. The coils are approximately 12-18" for the larger diameter wire and up to 7' for the smaller diameter wire.
Item #: 23908
Condition:
New
Price: $11.50
Description: 6" long brass wire. .025" (0.6mm) to .156 (4mm) diameters. 37 piece pack. India.
Item #: 23800
Condition:
New
Price: $8.50
Description: Soft brass. Use where workability is important. 1 oz. spools. 22 Gauge (.0253).
Item #: 29532
Condition:
New
Price: $17.25
Description: Soft brass. Use where workability is important. 1 oz. spools. 24 Gauge (.0201).
Item #: 29533
Condition:
New
Price: $12.50
Description: .004" thick. 12 in a bundle. 6" Long.
Item #: 29386
Condition:
New
Price: $7.50
Description: Brass small end can be used with any of the larger end keys with wings (#29165 through #29170) to create a custom double end key with Swiss sized ends. Made in India.
Item #: 24669
Condition:
New
Price: $1.25
as low as: $1.00
12 or more
Description: Brass small end can be used with any of the larger end keys with wings (#29165 through #29170) to create a custom double end key with Swiss sized ends. Made in India.
Item #: 24668
Condition:
New
Price: $1.25
as low as: $1.00
12 or more
Description: Brass small end can be used with any of the larger end keys with wings (#29165 through #29170) to create a custom double end key with Swiss sized ends. Made in India.
Item #: 24667
Condition:
New
Price: $1.25
as low as: $1.00
12 or more
Description: 25 piece assortment of varying lengths and thicknesses. Made in India.
Item #: 29464
Condition:
New
Price: $4.50
Description: Brass small end can be used with any of the larger end keys with wings (#29165 through #29170) to create a custom double end key with Swiss sized ends. Made in India.
Item #: 24665
Condition:
New
Price: $1.25
as low as: $1.00
12 or more
Description: Brass small end can be used with any of the larger end keys with wings (#29165 through #29170) to create a custom double end key with Swiss sized ends. Made in India.
Item #: 24664
Condition:
New
Price: $1.25
as low as: $1.00
12 or more
Description: Made in Germany. 19.5mm / 8.0mm (length x width) 15.0mm / 0.05 mm (hole-to-pin length & spring thickness). 2 Holes
Item #: 24686
Condition:
New
Price: $5.00
as low as: $4.75
3 or more
Description: Made in Germany. 14.5mm / 8.0mm (length x width) 10.5mm / 0.04mm (hole-to-pin length & spring thickness). Used on Jauch clocks.
Item #: 24688
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: Used on Urgos & other clocks. Made in Germany. 25.5mm / 11.0mm (length x width) 17.5mm / 0.04mm (hole-to-pin length & spring thickness).
Item #: 24689
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: Made in Germany. 27.0mm / 12.0mm (length x width) 16.0mm / 0.06mm (hole-to-pin length & spring thickness)
Item #: 24690
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: Made in Germany. 24.0mm / 12.0mm (length x width) 15.0mm / 0.10mm (hole-to-pin length & spring thickness). Used on Kieninger clocks.
Item #: 24692
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: Made in Germany. 17.5mm / 8.0mm (length x width) 12.0mm / 0.08mm (hole-to-pin length & spring thickness). Used on Kieninger clocks.
Item #: 24693
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: Indicates the size of the key in millimeter measurements. 18 different sizes. Note: Swiss sizes are different than American sizes.
-American Sizes #000 Through #18 (2.00mm Through 6.00mm)-PART...More Details »
Item #: 30466
Condition:
New
Price: $28.00
Description: Made in Germany. 24.5mm / 12.0mm (length x width) 17.5mm / 0.10mm (hole-to-end of teardrop hole length & spring thickness). Used on Morbier clocks. No Pin.
Item #: 24694
Condition:
New
Price: $11.50
as low as: $11.25
3 or more
Description: Gold plated brass. #3 (3.00mm) large end. #00000 (1.25mm) small end. China.
Item #: 29719
Condition:
New
Price: $10.00
Description: Hardwood handle with brass shaft. Swiss Size. Made in India.
Item #: 31054
Condition:
New
Price: $9.50
as low as: $9.25
3 or more
Description: Hardwood handle with brass shaft. Swiss Size. Made in India.
Item #: 31053
Condition:
New
Price: $9.50
as low as: $9.25
3 or more
Description: German made. 20.0mm / 5.0mm (length x width) 15.5mm / 0.05mm (hole-to-pin length & spring thickness)
Item #: 24695
Condition:
New
Price: $8.00
as low as: $7.75
3 or more
Description: Fancy crank has a wood handle and brass shaft. Combine with other sizes for price break. Made in India.
Item #: 31049
Condition:
New
Price: $10.00
as low as: $9.75
3 or more
Description: Made in Germany. 14.5mm / 6.0mm (length x width) 10.5mm / 0.04mm (hole-to-pin length & spring thickness). Plastic.
Item #: 24685
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Fancy crank has a wood handle and brass shaft. Combine with other sizes for price break. Made in India. Suitable and economical substitute for Kieninger & other cranks.
Item #: 29253
Condition:
New
Price: $10.00
as low as: $9.75
3 or more
Description: German made. For Kundo electronic clocks 16.0mm / 17.0mm (length x width) 9.0mm / 0.04mm (hole-to-hole length & spring thickness). No Pin.
Item #: 12070
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: Wood handled crank fits Hermle and Kieninger current production movements and others. #7 (4.00mm). Made in China.
Item #: 29311
Condition:
New
Price: $10.00
Description: Fancy crank has a wood handle and brass shaft. Combine with other sizes for price break. Made in India.
Item #: 31048
Condition:
New
Price: $10.00
as low as: $9.75
3 or more
Description: Hardwood handle with brass shaft. Swiss Size. Made in India.
Item #: 23771
Condition:
New
Price: $9.50
as low as: $9.25
3 or more
Description: Copy of the Grivolas lower suspension block requires thinning in order to fit in the pendulum slot. Limited quantities.
Item #: 24672
Condition:
New
Price: $25.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group