Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: This 0.15mm wire diameter silver contact spring has a 4mm end loop and 2mm diameter coils. The spring is fitted to the Bulle with one end attached to the end of the fork arbor and the other by a...More Details »
Item #: 23803
Condition:
New
Price: $43.00
Description: 18 coils of 0.15mm diameter wire with two half end coils at right angles. These springs compensate for variations in battery voltage and temperature. They’re made from a copper-nickel (C-902)...More Details »
Item #: 23804
Condition:
New
Price: $50.00
Description: For Brillie and similar battery clocks. Pins included.
Item #: 29312
Condition:
New
Price: $14.00
Description: Brushed brass finished end cap for grandfather weight shells. The cap is 2-3/8" in diameter.
Item #: 23855
Condition:
New
Price: $5.00
Description: German made. For Kundo electronic clocks 16.0mm / 17.0mm (length x width) 9.0mm / 0.04mm (hole-to-hole length & spring thickness). No Pin.
Item #: 12070
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: Made in Germany. 14.5mm / 6.0mm (length x width) 10.5mm / 0.04mm (hole-to-pin length & spring thickness). Plastic.
Item #: 24685
Condition:
New
Price: $4.50
as low as: $4.25
3 or more
Description: Polished brass finish end cap to fit 32mm diameter weight shells. The cap diameter is 1-3/8".
Item #: 23787
Condition:
New
Price: $3.50
Description: Polished brass finished end cap for weight shells. Cap diameter is 1-7/8".
Item #: 29556
Condition:
New
Price: $3.50
Description: German made. 20.0mm / 5.0mm (length x width) 15.5mm / 0.05mm (hole-to-pin length & spring thickness)
Item #: 24695
Condition:
New
Price: $8.00
as low as: $7.75
3 or more
Description: Made in Germany. 24.5mm / 12.0mm (length x width) 17.5mm / 0.10mm (hole-to-end of teardrop hole length & spring thickness). Used on Morbier clocks. No Pin.
Item #: 24694
Condition:
New
Price: $11.50
as low as: $11.25
3 or more
Description: Made in Germany. 17.5mm / 8.0mm (length x width) 12.0mm / 0.08mm (hole-to-pin length & spring thickness). Used on Kieninger clocks.
Item #: 24693
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: 15/16" nickel brass top hook with M4 internal threads. Used on many common weight shells.
Item #: 32115
Condition:
New
Price: $2.50
Description: Made in Germany. 24.0mm / 12.0mm (length x width) 15.0mm / 0.10mm (hole-to-pin length & spring thickness). Used on Kieninger clocks.
Item #: 24692
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: Made in Germany. 27.0mm / 12.0mm (length x width) 16.0mm / 0.06mm (hole-to-pin length & spring thickness)
Item #: 24690
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: Used on Urgos & other clocks. Made in Germany. 25.5mm / 11.0mm (length x width) 17.5mm / 0.04mm (hole-to-pin length & spring thickness).
Item #: 24689
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: Made in Germany. 14.5mm / 8.0mm (length x width) 10.5mm / 0.04mm (hole-to-pin length & spring thickness). Used on Jauch clocks.
Item #: 24688
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.036" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30964
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0935" x 2-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30942
Condition:
New
Price: $1.25
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.089" x 2-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30943
Condition:
New
Price: $1.25
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.086" x 2-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30944
Condition:
New
Price: $1.25
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.082" x 2-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30945
Condition:
New
Price: $1.25
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.081" x 2-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30946
Condition:
New
Price: $1.25
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0785" x 2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30947
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.076" x 2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30948
Condition:
New
Price: $1.00
Description: The highest quality natural gut available. Sizes 1.0mm through 2.5mm are sold in 2 lengths of 3.5 meters each (approximately 11-6" for a total of 23 ft). 1.40mm x 7 meters.
Item #: 29776
Condition:
New
Price: $37.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.2055" x 3-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30555
Condition:
New
Price: $2.75
Description: Complete weight shell includes top hook, bottom nib and center rod. Polished Brass Finish With Flat Caps. 2-3/8" x 11" (60mm x 280mm). Available as an assembly (#13796) with a 7-1/2 lb. lead weight...More Details »
Item #: 29544
Condition:
New
Price: $30.00
Description: Complete weight shell includes end caps, top hook, bottom nib and center rod. 2-3/8" x 9-5/8" (60mm x 245mm). Brushed Nickel finish.
Weight shells may have either rounded or straight edge end...More Details »
Item #: 29401
Condition:
New
Price: $27.50
Description: Dull brushed brass finish shell includes a threaded center rod, end caps, a top hook, and a bottom cap nut. 9-5/8" long x 2-3/8" diameter. Available as an assembly (#32157) with a 7-1/2 lb. lead...More Details »
Item #: 32129
Condition:
New
Price: $42.50
Description: 2-3/8" x 9-5/8" (60mm x 245mm). With threaded center rod, flat end caps, top hook & bottom nib. Brass finish with pattern band. China. Available as an assembly (#29404) with a 7-1/2 lb. lead weight...More Details »
Item #: 29402
Condition:
New
Price: $35.00
Description: Weight shell includes top hook, bottom nib and center rod. Polished Brass Finish With Flat Caps. 1-7/8" x 11" (48mm x 280mm). China. Available as an assembly (#13771) with a 4-1/2 lb. lead weight...More Details »
Item #: 29403
Condition:
New
Price: $26.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.067" x 2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30951
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0465" x 1-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30956
Condition:
New
Price: $1.00
Description: Etched brass finish shell includes end caps, a threaded center rod, a top hook, and a bottom cap nut. 8-7/8" long x 1-7/8" diameter.
Weight shells may have either rounded or straight edge end...More Details »
Item #: 32126
Condition:
New
Price: $41.50
Description: Complete weight shell includes top hook, bottom nib and center rod. Polished Brass Finish With Flat End Caps. 1-1/4 x 5-5/16 (32mm x 135mm).
Weight shells may have either rounded or straight...More Details »
Item #: 29543
Condition:
New
Price: $16.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.042" x 1-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30958
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.204" x 3-3/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30556
Condition:
New
Price: $2.75
Description: Brass 5/16" bottom nib has an M5 internal thread. Used on many common weight shells.
Item #: 23812
Condition:
New
Price: $1.75
Description: 1/2" nickel brass finished bottom nib with M4 internal threads. Used on many common weight shells.
Item #: 32116
Condition:
New
Price: $2.25
Description: Brass 5/8" top hook for weight shells has an M5 internal thread. Used on many common weight shells.
Item #: 23811
Condition:
New
Price: $2.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.039" x 1-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30961
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.038" x 1-1/2" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30962
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.199" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30558
Condition:
New
Price: $2.50
Description: Made in Germany. 19.5mm / 8.0mm (length x width) 15.0mm / 0.05 mm (hole-to-pin length & spring thickness). 2 Holes
Item #: 24686
Condition:
New
Price: $5.00
as low as: $4.75
3 or more
Description: 25 piece assortment of varying lengths and thicknesses. Made in India.
Item #: 29464
Condition:
New
Price: $4.50
Description: .004" thick. 12 in a bundle. 6" Long.
Item #: 29386
Condition:
New
Price: $7.50
Description: Soft brass. Use where workability is important. 1 oz. spools. 24 Gauge (.0201).
Item #: 29533
Condition:
New
Price: $12.50
Description: Soft brass. Use where workability is important. 1 oz. spools. 22 Gauge (.0253).
Item #: 29532
Condition:
New
Price: $17.25
Description: Polished brass finished end cap with rounded edge. 2-3/8" diameter.
Item #: 29557
Condition:
New
Price: $3.50
Description: 6" long brass wire. .025" (0.6mm) to .156 (4mm) diameters. 37 piece pack. India.
Item #: 23800
Condition:
New
Price: $8.50
Description: 12 coil set of medium hard brass wire includes one coil each of B & S gauge sizes 18 to 30. India. The coils are approximately 12-18" for the larger diameter wire and up to 7' for the smaller diameter wire.
Item #: 23908
Condition:
New
Price: $11.50
Description: 4-1/2" long steel rod. .0275"(0.70mm) to .1575 (4.0mm) diameters. 37 piece pack. India.
Item #: 23801
Condition:
New
Price: $8.50
Description: Assortment of hollow brass tube is ideal for bushings. OD 11.00mm ID 7.50mm, OD 9.50mm ID 6.33mm, OD 7.90mm ID 4.30mm, OD 6.30mm ID 2.70mm, OD 4.70mm ID 3.40mm. OD 3.90mm ID 2.80mm, OD 3.15mm ID 1.75mm, OD 2.50mm ID 0.65mm. All are 3-1/8" long.
Item #: 23885
Condition:
New
Price: $12.50
Description: 9-1/4" long. Use on weight shell #13931 and others.
Item #: 10060
Condition:
New
Price: $5.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.196" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30559
Condition:
New
Price: $2.25
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.0292" x 1-3/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30969
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.026" x 1-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30971
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.028" x 1-1/4" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30970
Condition:
New
Price: $1.00
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.201" x 3-5/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30557
Condition:
New
Price: $2.50
Description: High speed ground steel. Use to make pinions, arbors, gages, pins, punches, or other special tools. 0.025" x 1-1/8" long.
Tolerance: + .0000" / - .0005"
Hardened to Rc 63-65
Item #: 30972
Condition:
New
Price: $1.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group