Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Left side gathering pallet for grandfather clocks. Nickeled brass. Combine with #10533 for quantity discount.
Round mounting hole , 1 1/8" length overall , 15/16" from mounting hole to tip.
Item #: 10532
Condition:
New
Price: $21.00
as low as: $20.75
2 or more
Description: 12" wide x 12" bBubble wrap. Just slide between chime bars in a chime bar assembly for good protection.
Item #: 23777
Condition:
New
Price: $0.50
Description: For quartz movement mounting nuts with 1/4", 5/16", 3/8" and 1/2" spans. Made in India.
Item #: 19909
Condition:
New
Price: $9.00
Description: We use this product for adhering the glass to the gear ring on Golden Hour clocks. 5 fl oz. tube.
PLEASE NOTE:
Due to government regulations, this product CANNOT be shipped through US MAIL...More Details »
Item #: 29806
Condition:
New
Price: $33.50
Description: All the tools needed to work on Atmos clocks. Tube to insert suspension wire, hook to insert chain, hand puller, wrench for balance nut, tool for slotted balance nut, movement holder (Does not fit...More Details »
Item #: 23781
Condition:
New
Not Available
Price: $228.00
Description: Atmos Tool #IV is a commonly used hand remover. CURRENTLY UNAVAILABLE.
Item #: 23919
Condition:
New
Not Available
Price: $35.00
Description: Tool #VII is made of acrylic. With four pin legs for stability.
Item #: 23920
Condition:
New
Price: $35.00
Description: Atmos Style Tool #IX is a commonly used Atmos Balance Tube Bending Tool. CURRENTLY UNAVAILABLE.
Item #: 23921
Condition:
New
Not Available
Price: $35.00
Description: Double end wrench for 3/8" and 1/2" quartz large movement mounting nuts. Not appropriate for standard and mini quartz movement mounting nuts.
Item #: 15770
Condition:
New
Price: $2.50
Description: Use on German grandfather and grandmother movements. Can be used on others. Polished brass finished lyres, plain bobs and rods. #31002 and #31003 have straight rods. All others have twisted...More Details »
Item #: 31006
Condition:
New
Price: $112.00
Description: Low carbon steel with good machining characteristics. Can weld, braze or solder it. Great for small parts. Dimensions shown are outside diameter and length.
Item #: 29347
Condition:
New
Price: $2.75
Description: Use on German grandfather and grandmother movements. Can be used on others. Polished brass finished lyres, plain bobs and rods. #31002 and #31003 have straight rods. All others have twisted...More Details »
Item #: 31003
Condition:
New
Price: $70.00
Description: Use on German grandfather and grandmother movements. Can be used on others. Polished brass finished lyres, plain bobs and rods. #31002 and #31003 have straight rods. All others have twisted...More Details »
Item #: 31001
Condition:
New
Price: $91.00
Description: Adjustable 2" wide x 3-7/8" tall oak leaf with an 8-1/2" wood rod. Unfinished.
Item #: 29204
Condition:
New
Price: $11.00
Description: Adjustable 2" wide x 3-7/8" tall oak leaf with an 8-1/2" wood rod. Green and brown finish.
Item #: 29203
Condition:
New
Price: $11.00
Description: Adjustable 2" wide x 3-7/8" tall oak leaf with an 8-1/2" wood rod. Brown finish.
Item #: 29202
Condition:
New
Price: $11.00
Description: 8-1/4" long x 3/8" wide walnut stained rod for cuckoo pendulums.
Item #: 29227
Condition:
New
Price: $1.50
Description: 6-5/8" long x 3/8" wide walnut stained rod for cuckoo pendulums.
Item #: 29226
Condition:
New
Price: $1.50
Description: 13-1/2" long x 3/8" wide walnut stained rod for cuckoo pendulums.
Item #: 29228
Condition:
New
Price: $2.00
Description: Brass 5/8" diameter bob on a steel rod 6-1/4 long with brass top hook. Can be shortened.
CURRENTLY UNAVAILABLE.
Item #: 29768
Condition:
New
Not Available
Price: $12.50
Description: Consists of #32127 Weight Shell and #13932 weight Filler (7-1/2 pounds). 60mm x 245mm (2-3/8" x 9-5/8"). Etched brass finish. With end caps, top hook, bottom nib & threaded center rod.
Weight...More Details »
Item #: 32159
Condition:
New
Price: $79.50
Description: Brass plated break-away rod is scored in 1" increments to allow easy length reduction. Used on quartz pendulum rod assemblies.
Item #: 29541
Condition:
New
Price: $4.50
Description: Brass plated break-away rod is scored in 1" increments to allow easy length reduction. Used on quartz pendulum rod assemblies.
Item #: 29540
Condition:
New
Price: $9.50
Description: Steel rod with brass nut. 3" long. CURRENTLY UNAVAILABLE.
Item #: 24700
Condition:
New
Not Available
Price: $5.00
Description: For Waterbury pendulum rods. Overall length is 2-15/16".
Item #: 10259
Condition:
New
Price: $4.75
Description: From a small hoard of #2, #77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. They...More Details »
Item #: 32028
Condition:
New
Price: $2.00
Description: 4-3/4 long 3mm threaded, flat end steel or brass rod with a brass finished nut. Made in China.
Item #: 29310
Condition:
New
Price: $4.00
Description: Cast bob for New Haven mantel clocks. 1-1/2" diameter x 2" long. 2.6 ozs.
⚠️ WARNING: Contains chemicals that may cause cancer, birth defects, or reproductive harm for more information go to www.P65warnings.ca.gov.
Item #: 23760
Condition:
New
Price: $7.00
Description: Polished brass finished end cap for weight shells. Cap diameter is 1-21/32".
Item #: 29397
Condition:
New
Price: $3.50
Description: Plain polished brass plated bobs for wood rods. 3/4" Rear Slot. 5-1/8 Dia. (130mm).
Fits many German & American clocks. Made in Asia.
Item #: 29405
Condition:
New
Price: $19.00
Description: 5-1/2" Dia (140mm). 1" rear slot. Brushed Brass finish. Fits many German & American clocks. Made in Asia.
Item #: 29796
Condition:
New
Price: $20.00
Description: Brushed brass finished end cap for grandfather weight shells. The cap is 2-3/8" in diameter.
Item #: 23855
Condition:
New
Price: $5.00
Description: Polished brass finished end cap with rounded edge. 2-3/8" diameter.
Item #: 29557
Condition:
New
Price: $3.50
Description: Brushed brass finished end cap with rounded edge. Fits 2-3/8" diameter shell.
Item #: 29558
Condition:
New
Price: $4.00
Description: Economical nickel plated steel key. Made in India.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth...More Details »
Item #: 29499
Condition:
New
Price: $2.50
as low as: $2.25
12 or more
Description: 15/16" nickel brass top hook with M4 internal threads. Used on many common weight shells.
Item #: 32115
Condition:
New
Price: $2.50
Description: Polished brass finished end cap for weight shells. Cap diameter is 1-7/8".
Item #: 29556
Condition:
New
Price: $3.50
Description: Economical nickel plated steel key. Made in India.
Item #: 29502
Condition:
New
Price: $2.50
as low as: $2.25
3 or more
Description: Economical nickel plated steel key. Made in India.
Item #: 23792
Condition:
New
Price: $2.50
as low as: $2.25
3 or more
Description: Polished brass finish end cap to fit 32mm diameter weight shells. The cap diameter is 1-3/8".
Item #: 23787
Condition:
New
Price: $3.50
Description: Used on electric Revere & Herschede mantel clocks for fast/slow adjustments.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California...More Details »
Item #: 11200
Condition:
New
Price: $14.00
Description: One each of 5-prong even size (#2-4-6-8-10)and odd size (#3-5-7-9-11) pocket watch keys. Nickeled. Made in India.
Item #: 23831
Condition:
New
Price: $9.50
Description: Denison #37 (37 x 1 x 30)converts to: - .4.50mm Width - .22mm/.23mm Thickness - 28.25" long - Hole at each end Waltham factory number 2232. This spring was used in many different applications,...More Details »
Item #: 30465
Condition:
New
Price: $15.50
as low as: $15.00
3 or more
Description: Also fits some Session and Ingraham movements. 3/4" x .016" x 108" loop end mainspring. Metric equivalent is 19.0 x 0.41 x 2743mm.
Item #: 29515
Condition:
New
Price: $23.00
Description: E. Ingraham Clock Company reproduction label measures 8-3/8" wide x 8" tall. Black lettering on a antiqued buff background.
Item #: 12648
Condition:
New
Price: $1.50
Description: Dark brown embossed acorn & oak leaf early American design. 1.33" diameter x .67" height. With insulator & poloarized prongs.
Item #: 30497
Condition:
New
Price: $6.00
Description: 2-1/4" brass bezel diameter x 2-1/8" minimum hole diameter by 5/8" depth below the bezel. Plain white dial with Roman numerals. Uses a watch battery #LR44. Can combine with any other size & style fit-ups for price breaks. Style #2.
Item #: 23699
Condition:
New
Price: $10.00
as low as: $9.50
12 or more
Description: Fits 5/16" rod for quartz applications. 3-1/2" Diameter. Brass plated.
Item #: 29538
Condition:
New
Price: $3.25
Description: Fits 5/16" rod for quartz applications. 2-3/4" Diameter. Brass plated.
Item #: 29537
Condition:
New
Price: $3.00
Description: Bob wires with rating nuts. In lengths:
2", 2-5/8", 3-1/4", and 4-1/4".
Item #: 30477
Condition:
New
Price: $7.50
Description: Fits 60mm shells. Brass finish.
Item #: 29308
Condition:
New
Price: $5.00
Description: Brass brushed finish end cap for grandmother weight shells. The cap is 1-5/8" in diameter.
Item #: 23854
Condition:
New
Price: $5.50
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Plain white dial with Roman numerals. Style #1. Uses one "AA" battery which is not included. Can combine with...More Details »
Item #: 30486
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 3-1/2" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Plain white dial with arabic numerals. Style #1. Uses one "AA" battery which is not included. Can combine with...More Details »
Item #: 30485
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: From a small hoard of #2, 77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. Some...More Details »
Item #: 32038
Condition:
New
Price: $4.00
Description: Black embossed & ribbed early American design. 1.33" diameter x .67" height. With insulator & poloarized prongs.
Item #: 30498
Condition:
New
Price: $6.00
Description: From a small hoard of #2, 77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. Some...More Details »
Item #: 32024
Condition:
New
Price: $10.50
Description: From a small hoard of #2, 77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. Some...More Details »
Item #: 32025
Condition:
New
Price: $10.50
Description: 4-1/2 Dia (115mm). 3/4" rear slot. Brushed Brass finish. Fits many German & American clocks. Made in Asia. This bob has a depth of 1.05" or 14.5mm.
Item #: 29795
Condition:
New
Price: $16.25
Description: From a small hoard of #2, 77 movement parts that have been in storage since the 1970s. All parts were made for a reproduction movement that was never completed. The brass parts may be dirty. Some...More Details »
Item #: 32042
Condition:
New
Price: $2.50
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group