Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: Black oxide finish on steel. 10 pieces/pack. Regularly $4.00. While supplies last.
Item #: 02701
Condition:
New
Price: $1.00
Description: 2-tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 36-teeth with improvement in tonal quality.
Item #: 34232
Condition:
New
Price: $73.50
Description: Brass lock & key. With 2-3/16 “ tall front plate, strike plate, keyhole escutcheon, and mounting screws. Overall depth is 1-1/2”. 17/32” thick x 1-13/64” wide.
Item #: 34228
Condition:
New
Price: $17.50
Description: 1-1/2” wide x 2-1/4” tall x 13/32” thick. with plastic lock receptacle & cast keyhole escutcheon.
Item #: 34231
Condition:
New
Price: $21.00
Description: Nickeled steel lock & key. 1-11/16” wide x 2-1/4” tall x 3/8” thick.
Item #: 34226
Condition:
New
Price: $9.00
Description: With keyhole escutcheon, plastic key hole plug, plastic lock receptacle, and mounting screws. 1-1/4” wide x 2-11/64” tall x 17/32” thick.
Item #: 34229
Condition:
New
Price: $21.00
Description: Bronzed steel lock & key. With mounting screws. 1-1/16” wide x 2-3/64” tall x 2-21/64” thick.
Item #: 34227
Condition:
New
Price: $5.00
Description: Brushed brass plated steel lock & key. With plastic key hole plug, plastic lock receptacle, and mounting screws. 1-1/2” wide x 2-7/32” tall x 13/32” thick.
Item #: 34230
Condition:
New
Price: $21.00
Description: New, old stock. .933” steel toothed wheel with brass arbor bushing. .165” overall height. Regularly $7.50. While supplies last.
Item #: 02678
Condition:
New
Price: $2.50
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.
Item #: 02685
Condition:
New
Price: $1.00
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.
Item #: 02686
Condition:
New
Price: $1.00
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $3.00. While supplies last.
Item #: 02687
Condition:
New
Price: $1.50
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.
Item #: 02688
Condition:
New
Price: $1.00
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.
Item #: 02689
Condition:
New
Price: $1.00
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.
Item #: 02690
Condition:
New
Price: $1.50
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.
Item #: 02693
Condition:
New
Price: $1.00
Description: New, old stock. Brass (plain or nickeled brass-no choice).Regularly $3.00. While supplies last.
Item #: 02694
Condition:
New
Price: $1.50
Description: New, old stock. #0-80 internal thread. .157” height x .274” OD. Nickeled brass. Regularly $3.00. While supplies last.
Item #: 02673
Condition:
New
Price: $1.00
Description: New, old stock. Fits S4D-E (S1). #5-40 x 5/32” slotted pan head steel machine screw. Regularly $1.50. While supplies last.
Item #: 02675
Condition:
New
Price: $0.50
Description: New, old stock. Brass. .366” head OD with 20 teeth. .248” overall height x .135” ID. .231 shaft diameter. Regularly $6.00. While supplies last.
Item #: 02677
Condition:
New
Price: $2.00
Description: Spring #3437. New, old stock. Regularly $3.00. While supplies last.
Item #: 02658
Condition:
New
Price: $1.00
Description: New, old stock. .182” OD x .100” ID x .009” thick. Regularly $2.50. While supplies last.
Item #: 02661
Condition:
New
Price: $1.00
Description: Part #3330. New, old stock. .710” OD x .024” thick steel with oblong hole ID. Regularly $5.00. While supplies last.
Item #: 02666
Condition:
New
Price: $2.00
Description: New, old stock. Regularly $25.00. While supplies last.
Item #: 02668
Condition:
New
Price: $12.50
Description: New, old stock. Regularly $30.00. While supplies last.
Item #: 02669
Condition:
New
Price: $15.00
Description: New, old stock. 110 volts, 60 cycles. Fits Ardmore Model S5E, Bachelor Model S5A, Country Clock Models S5k-S5K-1, Dunbar, Logan, Manor Model S5B, Pittsfield Model S5G and Troy. Regularly $16.00. While supplies last.
Item #: 02650
Condition:
New
Price: $8.00
Description: New, old stock. .730” wheel diameter x .475” long. Regularly $4.00. While supplies last.
Item #: 02655
Condition:
New
Price: $1.00
Description: Black sweep second hand for most quartz movements measures 4-1/4" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34249
Condition:
New
Price: $0.50
as low as: $0.04
12 or more
Description: The black minute hand measures 1-15/16" from the center of the mounting hole to the tip. Fits some quartz clock movements requiring push-on hands.
NOTE: Hands have a minute hand mounting...More Details »
Item #: 34246
Condition:
New
Price: $0.75
Description: Black sweep second hand for most quartz movements measures 3-1/2" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34245
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Gold plastic bezel with plastic lens. Gold Roman dial ring with black numerals. 3/4” gold second bit. 4” (103mm) bezel diameter. 3-1/2” minimum hole diameter. 2” depth below bezel. Visible...More Details »
Item #: 34239
Condition:
New
Price: $23.50
Description: 1-49/64” (45mm) outside diameter. Brass metal bezel. 1-5/8" mounting hole diameter with 5/32" mounting depth below bezel. White dial with Arabic numerals. Can combine with any other size or style...More Details »
Item #: 34243
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 1-49/64” (45mm) outside diameter. Brass metal bezel. 1-5/8" mounting hole diameter with 5/32" mounting depth below bezel. White dial with Roman numerals. Can combine with any other size or style...More Details »
Item #: 34244
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 10-15/64" long threaded steel rod for weight shells. M4.0 thread. Threaded both ends.
Item #: 34233
Condition:
New
Price: $4.50
Description: 6.5mm brass end fitting thread diameter. Cut to desired length.
Item #: 34221
Condition:
New
Price: $19.50
Description: 6.5mm brass end fitting thread diameter. Cut to length to put the rod in tune.
Item #: 34222
Condition:
New
Price: $22.50
Description: 6.5mm brass end fitting thread diameter. Cut to length to put the rod in tune.
Item #: 34223
Condition:
New
Price: $8.50
Description: 8.0mm brass end fitting thread diameter. Cut to length to put the rod in tune.
Item #: 34224
Condition:
New
Price: $8.50
Description: Used on Hermle bezels with hinges requiring pins, but can use on other clocks. M5 external thread. 3mm internal hole for pins. 13.8mm overall length. 2 pieces/pack. Regularly $1.00. While supplies last.
Item #: 02640
Condition:
New
Price: $0.50
Description: Mounts movements in brackets. M3 diameter. Fits Hermle & other movements. 20mm overall length. With 10mm of thread.
Item #: 02637
Condition:
New
Price: $2.00
Description: Expandable sock for protecting and transporting weight shells up to 11" long. See #23120 for weight sock for weight shells up to 6" long.
Item #: 34238
Condition:
New
Price: $2.25
Description: Push-on hands in a spade/diamond style will fit most quartz movements requiring push-on hands. Hands & battery not included. The black minute hand measures 2-9/16" from the center of the mounting...More Details »
Item #: 34237
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: Plain polished brass plated bob for wood rods were were produced incorrectly. They should have a higher convex backing to accommodate wood rods, but were manufactured with a slimmer convex backing....More Details »
Item #: 02629
Condition:
New
Price: $6.00
Description: 8" Flat clock glass. Combine with any other convex or flat glass for applicable quantity discounts.
Item #: 34225
Condition:
New
Price: $6.75
as low as: $6.25
12 or more
Description: Steel rod is not blued. Can be trimmed to any length. With 6.5mm threaded brass end fitting.
Item #: 34198
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: Steel rods are not blued. Can be trimmed to any length. With 6.5mm threaded brass end fitting.
Item #: 34199
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: 6.5mm brass end fitting. China.
Item #: 34205
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: 6.5mm brass end fitting. China.
Item #: 34206
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: 10-15/64" long threaded steel rod for weight shells. M3.0 thread. Threaded both ends.
Item #: 34208
Condition:
New
Price: $3.00
Description: Externally threaded M4 top hook for weight shells.
Item #: 34215
Condition:
New
Price: $2.00
Description: Gold sweep second hand for most quartz movements measures 2-13/16" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34211
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Black sweep second hand for most quartz movements measures 3-3/16" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34212
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Gold sweep second hand for most quartz movements measures 4-1/4" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34213
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Black hand for UW32 and others. 3/4” center to tip with a 13/32” long brass mounting shaft.
Item #: 34098
Condition:
New
Price: $5.50
Description: Black hand for UW32 and others. 3/4” center to tip with a 1/2” long brass mounting shaft.
Item #: 34099
Condition:
New
Price: $5.50
Description: Black hand for UW32 and others. 3/4” center to tip with a 15/16” long brass mounting shaft.
Item #: 34100
Condition:
New
Price: $5.50
Description: Black hand for UW32 and others. 3/4” center to tip with a 1-3/8” long brass mounting shaft.
Item #: 34101
Condition:
New
Price: $5.50
Description: Plate measures 29.7mm x 17.7mm The potence is 6.7mm. 18,000 beats/hour. 9 jewels, 8 leaf pinion, steel escape wheel. Escape wheel has clockwise rotation. The potence measures 6.70mm from the bottom...More Details »
Item #: 34210
Condition:
New
Price: $79.50
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing right). Regularly $25.00. While supplies last.
Item #: 02618
Condition:
New
Price: $8.00
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing left). Regularly $25.00. While supplies last.
Item #: 02619
Condition:
New
Price: $8.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group