- Home »
- Catalog »
- Clock Repair & Replacement Parts »
- Movements, Motors, Rotors, Fit-Ups & Related »
- Quartz Movements, Hardware and Tools
Timesavers - Quartz Movements, Hardware and Tools
Battery-run pendulum & non-pendulum movements, fit-ups and related items
Select a Sub-Category
Dial, bezel & movement assemblies that just need a battery
Nuts, washers, hardware packs, mounting pads, adjusting wrenches, etc.
Chiming and non-chiming battery-run movements, standard and high torque.
Chiming and non-chiming battery-run movements, standard & high torque
Quartz Movements, Hardware and Tools Featured Products
Description: Made in Asia. 2-3/16" x 2-3/16" x 5/8" thick. 9/16" long handshaft. Max dial thickness of 3/8". Uses one "AA" battery which is not included. Has an alarm feature. Stepping sweep. Complete...More Details »
Item #: 32463
Condition:
New
Price: $6.00
as low as: $5.25
12 or more
Description: 4-3/4"" x 2-1/4" x 7/8" thick with a 7/8" thick with a 1/2" long handshaft. Maximum dial thickness is 3/16". Runs on one "AA" battery, not included No chiming feature. I-shaft hands are not...More Details »
Item #: 32467
Condition:
New
Price: $6.50
as low as: $5.75
12 or more
Description: Converts a mini quartz movement to a pendulum. Measures 5-1/2" x 2-1/4" x 1-1/4" deep.#32468 will pull up to 250 grams (8.8 ounces). See #23552 which will pull up to 100 grams (3.2 ounces) and is...More Details »
Item #: 32468
Condition:
New
Price: $6.50
Description: 2-3/16 x 2-3/16 x 5/8 inch deep movement with a 29/32" long hand shaft. Max dial thickness of 1/2 inches. Runs on 1-AA battery, not included. Combine with #33696, #33697, #20880, 20881 and #14579...More Details »
Item #: 32462
Condition:
New
Price: $3.00
as low as: $2.00
100 or more
Description: Features a built-in plastic hanger & includes all mounting hardware. With a brass (not plastic) minute hand clutch gear to insure hands continue to move. When this plastic gear cracks on cheaper...More Details »
Item #: 32386
Condition:
New
Price: $4.00
as low as: $3.25
50 or more
Description: Features a built-in plastic hanger & includes all mounting hardware. With a brass (not plastic) minute hand clutch gear to insure hands continue to move. When this plastic gear cracks on cheaper...More Details »
Item #: 32387
Condition:
New
Price: $4.00
as low as: $3.25
50 or more
Description: Features a built-in plastic hanger & includes all mounting hardware. With a brass (not plastic) minute hand clutch gear to insure hands continue to move. When this plastic gear cracks on cheaper...More Details »
Item #: 32388
Condition:
New
Price: $4.00
as low as: $3.25
50 or more
Description: 2-7/32" x 3-7/16" x 7/8" thick with a 1-1/16" long handshaft. Maximum dial thickness is 5/8". Runs on one "AA" battery, not included No chiming feature. I-shaft hands are not included and must...More Details »
Item #: 32225
Condition:
New
Price: $6.50
as low as: $5.75
12 or more
Description: Double end wrench for 3/8" and 1/2" quartz large movement mounting nuts. Not appropriate for standard and mini quartz movement mounting nuts.
Item #: 15770
Condition:
New
Price: $2.50
Description: For quartz movement mounting nuts with 1/4", 5/16", 3/8" and 1/2" spans. Made in India.
Item #: 19909
Condition:
New
Price: $9.00
Description: 2-1/4" brass bezel diameter x 2-1/8" minimum hole diameter by 5/8" depth below the bezel. Plain white dial with Roman numerals. Uses a watch battery #LR44. Can combine with any other size & style fit-ups for price breaks. Style #2.
Item #: 23699
Condition:
New
Price: $10.00
as low as: $9.50
12 or more
Description: 3-1/2" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Plain white dial with arabic numerals. Style #1. Uses one "AA" battery which is not included. Can combine with...More Details »
Item #: 30485
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Plain white dial with Roman numerals. Style #1. Uses one "AA" battery which is not included. Can combine with...More Details »
Item #: 30486
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 10 piece pack. 11/16" OD x 5/16" ID x .024" thixk (17.0mm x 8.25mm x 0.95mm).
Item #: 23863
Condition:
New
Price: $1.50
Description: Stepping sweep. Rear set. Combine with #33696, #33697, #20880, #20881 & #32462 for price breaks. Mini movement. 2-3/16” x 2-3/16” x 5/8”. Hand shaft 1-3/16". Max dial thickness 3/4". AA...More Details »
Item #: 14579
Condition:
New
Price: $3.00
as low as: $2.00
100 or more
Description: 10 piece pack. 14.0mm OD x 8.15mm ID x 0.38mm thick (9/16" x 5/16" x 1/64" approx.).
Item #: 23861
Condition:
New
Price: $1.50
Description: M4 thread. Fits most common mini quartz movement threaded I-shafts. Secures the minute hand to the I-shaft. For decorative purposes. 10 pack. Brass.
Item #: 23868
Condition:
New
Price: $1.50
Description: Flexible rubber ring used as a compression spacer for fit-ups. 2-1/8" OD.
Item #: 29078
Condition:
New
Price: $1.25
Description: Fits many quartz mini movements. Measures .700" wide. 10 pcs/pack. See #33968 for large version (.840" wide)
Item #: 23870
Condition:
New
Price: $2.00
Description: Standard brass mounting nut for 8.0mm (5/16") diameter quartz movement hand shafts. 10 pieces per pack.
Item #: 23866
Condition:
New
Price: $1.50
Description: M4 thread. Fits most common mini quartz movement threaded I-shafts. Secures the minute hand to the I-shaft. 10 pack. Brass.
Item #: 23867
Condition:
New
Price: $1.25
Description: The best sound of any movement on the market. Features 4 x 4 Westminster Chime (Westminster chimes on the quarter hours and strikes the hour), Westminster Chime (full Westminster chimes on the hour...More Details »
Item #: 30407
Condition:
New
Price: $45.00
as low as: $43.50
12 or more
Description: Movement measures 3-1/32" x 1-15/16" x 9/16" thick. Rotatable rear cover with 2” markings and arrow for easy calibration and setting. 50mm (less than 2”) diameter x 9/16” thick movement with...More Details »
Item #: 29826
Condition:
New
Price: $5.50
as low as: $5.00
6 or more
Description: Made in Asia. 2-3/8" x 3-3/4" x 1-3/8" thick with a 1-1/8" long handshaft. Maximum dial thickness is 5/8". Stepping sweep. Runs on one "C" battery which is not included. Westminster/Whittington...More Details »
Item #: 14584
Condition:
New
Price: $31.00
as low as: $30.25
12 or more
Description: Movement measures 3-1/32" x 1-15/16" x 9/16" thick. Rotatable rear cover with 2” markings and arrow for easy calibration and setting. 50mm (less than 2”) diameter x 9/16” thick movement with...More Details »
Item #: 29825
Condition:
New
Price: $5.50
as low as: $5.00
6 or more
Description: Time only quartz calendar movement measures 2-1/4" x 2-1/4" x 7/8". It accommodates a 31-day calendar hand in addition to the hour and minute hands. 7/8" handshaft length with a max dial thickness...More Details »
Item #: 29119
Condition:
New
Price: $27.50
as low as: $26.75
12 or more
Description: Quartz calendar pendulum movement has provision for a 31-day calendar hand in addition to the hour and minute hands. Measures 4-1/4" x 2-1/4" x 1-3/16". Overall handshaft length is 27/32" with a...More Details »
Item #: 29016
Condition:
New
Price: $27.50
as low as: $26.75
12 or more
Description: 2-3/16" x 2-3/16" x 5/8" thick mini movement runs an 1-AA battery, not included. The second hand mechanism is continuous, not a stepping motion. Hand shaft length of 1/2" with a max dial thickness...More Details »
Item #: 14573
Condition:
New
Price: $5.00
as low as: $4.00
100 or more
Description: 2-1/4" brass bezel diameter x 2-1/8" minimum hole diameter by 5/8" depth below the bezel. Plain white dial with Arabic numerals. Can combine with any other size & style fit-ups for price breaks. Uses a watch battery #LR44. Style #1
Item #: 23698
Condition:
New
Price: $10.00
as low as: $9.50
12 or more
Description: 2-3/16" x 2-3/16" x 5/8" thick mini movement runs an 1-AA battery, not included. The second hand mechanism is continuous, not a stepping motion. Hand shaft length of 25/32" with a max dial...More Details »
Item #: 29118
Condition:
New
Price: $5.00
as low as: $4.00
100 or more
Description: 2-1/4" brass bezel diameter x 2-1/8" minimum hole diameter by 5/8" depth below the bezel. Fancy white dial with Arabic numerals. Runs on an "N" battery which is not included. Can combine with any...More Details »
Item #: 23700
Condition:
New
Price: $11.50
as low as: $11.00
12 or more
Description: Stepping sweep. 2-3/16” x 3-3/8” x 5/8” case. Handshaft is 1-3/16" long. Max dial thickness is 3/4". Made in USA. Runs on 1-AA battery, not included. Combine with #33868, #23529 & #23530 for...More Details »
Item #: 14564
Condition:
New
Price: $7.00
as low as: $6.25
12 or more
Description: Standard brass mounting nut with a 1/2" across flats flange for 8.0mm (5/16") diameter quartz movement hand shafts where a larger hole needs spanning. Price is $0.75 each.
Item #: 23829
Condition:
New
Price: $0.75
Description: The best sound of any movement on the market. Features 4 x 4 Westminster Chime (Westminster chimes on the quarter hours and strikes the hour), Westminster Chime (full Westminster chimes on the hour...More Details »
Item #: 30408
Condition:
New
Price: $45.00
as low as: $43.50
12 or more
Description: The best sound of any movement on the market. Features 4 x 4 Westminster Chime (Westminster chimes on the quarter hours and strikes the hour), Westminster Chime (full Westminster chimes on the hour...More Details »
Item #: 29615
Condition:
New
Price: $45.00
as low as: $43.50
12 or more
Description: 2-3/16" x 2-3/16" x 5/8" thick mini movement runs an 1-AA battery, not included. The second hand mechanism is continuous, not a stepping motion. Hand shaft length of 21/32" with a max dial...More Details »
Item #: 29117
Condition:
New
Price: $5.00
as low as: $4.00
100 or more
Description: Emits an electronic pulse on the hour to trigger a sound making device. Commonly used in novelty clocks with bird, train or other sounds on the hour. 19/32" hand shaft length. 1/4" max dial...More Details »
Item #: 32153
Condition:
New
Price: $6.00
as low as: $5.25
50 or more
Description: Based on the lunar day of 24 hours and 50 minutes, this movement tells the general time of high and low tide. 2-3/16" x 2-3/16" x 5/8". Uses a standard "Push-On" hour hand only (which has a 5.0mm...More Details »
Item #: 29822
Condition:
New
Price: $5.50
as low as: $4.75
12 or more
Description: Made in USA. 2-3/4" x 2-1/8" x 1" thick with a 15/16" long handshaft. Maximum dial thickness is 1/2". Runs on one "C" battery which is not included. Rear set. Includes mounting hardware. Combine...More Details »
Item #: 14574
Condition:
New
Price: $7.25
as low as: $6.50
50 or more
Description: 10 piece pack. Brass Washers that fits 10mm shafts.7/16" ID.
Item #: 23862
Condition:
New
Price: $1.50
Description: Based on the lunar day of 24 hours and 50 minutes, this movement tells the general time of high and low tide. Movement measures 2-7/8" x 2-1/8" x 1" with an 11/16" handshaft length. Maximum dial...More Details »
Item #: 29819
Condition:
New
Price: $12.00
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Plain gold dial with roman numerals. Style #2. Uses one "AA" battery which is not included. Can combine...More Details »
Item #: 20467
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: Double sided adhesive pad is used for mounting quartz movements. 1-7/8" square with center hole knock out.
Item #: 20325
Condition:
New
Price: $1.50
Description: Converts a mini quartz movement to a pendulum. Measures 5-1/2" x 2-1/4" x 1-1/4" deep.#23552 will pull up to 100 grams (3.5 ounces). See #32468 which will pull up to 250 grams (8.8 ounces) and is...More Details »
Item #: 23552
Condition:
New
Price: $5.00
Description: Fits Hermle & other manufacturers mounting nuts. Made in Asia.
Item #: 20867
Condition:
New
Price: $15.50
Description: Flexible rubber ring used as a compression spacer for fit-ups. 2-3/8" OD.
Item #: 20483
Condition:
New
Price: $1.50
Description: Flexible rubber ring used as a compression spacer for fit-ups. 1-3/4" OD.
Item #: 19665
Condition:
New
Price: $1.25
Description: 12 rubber spacers in a pack. 1" OD x .354" ID x 1/16" thick. (25.4mm x 9.0mm x 1.6mm).
Item #: 18965
Condition:
New
Price: $1.75
Description: Made in Asia. 2-3/16" x 3-3/16" x 15/16" thick with a 1" long handshaft. Maximum dial thickness is 5/8". Runs on one "AA" battery which is not included There is no chiming feature. I-shaft...More Details »
Item #: 14556
Condition:
New
Price: $13.50
as low as: $12.75
12 or more
Description: Made in the Asia. 2-1/4" x 2-1/4" x 5/8" thick with a 19/32" long hand shaft. Maximum dial thickness is 3/16". Runs on one "AA" battery which is not included. 24-hour mechanism is used in...More Details »
Item #: 14426
Condition:
New
Price: $5.00
as low as: $4.25
50 or more
Description: 3-1/4" x 4-1/2" x 1-5/16" thick with a 1-1/8" long handshaft. Maximum dial thickness is 5/8". Runs on one "C" battery which is not included. Westminster/Whittington chimes the 1/4" and strikes...More Details »
Item #: 14581
Condition:
New
Price: $34.50
as low as: $33.75
12 or more
Description: 13mm hand shaft (1/2"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/8". Stepping sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery not...More Details »
Item #: 20534
Condition:
New
Price: $3.50
as low as: $2.75
50 or more
Description: 2-1/4" x 2-1/8" x 5/8" thick oscillating movement rotates 2-1/4" tall gold plastic ball unit #33882 (included) that sits on a 1-5/8" base. Oscillates back & forth every 5 seconds. Base mounts...More Details »
Item #: 14528
Condition:
New
Price: $6.00
as low as: $5.25
12 or more
Description: Made in Asia. 2-3/16" x 2-3/16" x 9/16" thick with a 1-1/16" long handshaft. Maximum dial thickness is 5/8". Runs on one "AA" battery which is not included. Rear set. With a stepping second...More Details »
Item #: 14401
Condition:
New
Price: $7.50
as low as: $6.50
100 or more
Description: 14.5mm hand shaft (9/16" approx.). 2-7/32" x 2-7/32" x 5/8" deep snap-in movement is made in Asia. 3/16" max dial thickness. Runs on 1-AA battery. Hands & battery not included. Can combine with...More Details »
Item #: 22886
Condition:
New
Price: $3.50
as low as: $2.75
50 or more
Description: Made in Asia. 3" x 3-7/16" x 1-1/8" thick with a 7/8" long handshaft. Maximum dial thickness is 7/16". Runs on one "C" battery which is not included There is no chiming feature. I-shaft hands...More Details »
Item #: 19432
Condition:
New
Price: $22.50
as low as: $21.75
12 or more
Description: Made in Asia. 2-3/8" x 3-3/4" x 1-3/8" thick with a 5/8" long handshaft. Maximum dial thickness is 1/4". Runs on one "C" battery which is not included. Stepping sweep. Westminster/Whittington...More Details »
Item #: 14582
Condition:
New
Price: $31.00
as low as: $30.25
12 or more
Description: 3-1/2 x 3 x 1 inch deep high torque movement. Made in Asia. 7/8" long handshaft for dials up to 3/8" thick. Rear set. Runs on 1-C battery, not included. Uses I-shaft hands, not included. IF SECOND...More Details »
Item #: 22737
Condition:
New
Price: $28.75
as low as: $28.00
12 or more
Description: Made in Japan. 6-1/2" WIDE x 7" HEIGHT x 2" THICK with a 7/8" (22.5mm) long handshaft. Maximum dial thickness is 7/16". Runs on one "D" battery which is not included. Bim Bam strikes every hour...More Details »
Item #: 18400
Condition:
New
Price: $115.00
as low as: $113.50
12 or more
Description: Made in Asia. 2-3/16" x 3-3/16" x 15/16" thick with a 5/8" long handshaft. Maximum dial thickness is 1/4". Runs on one "AA" battery which is not included There is no chiming feature. I-shaft...More Details »
Item #: 14555
Condition:
New
Price: $13.50
as low as: $12.75
12 or more
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group