- Home »
- Catalog »
- Clock Repair & Replacement Parts »
- Movements, Motors, Rotors, Fit-Ups & Related »
- Quartz Movements, Hardware and Tools »
- Hardware & Tools for Quartz Movements
Timesavers - Hardware & Tools for Quartz Movements
Nuts, washers, hardware packs, mounting pads, adjusting wrenches, etc.
Browse Hardware & Tools for Quartz Movements Products
Items 1-19 of 19
Description: Fits many quartz mini movements. Measures .840" wide. 10 pcs/pack. See #23870 for small version (.700" wide)
Item #: 33968
Condition:
New
Price: $3.50
Description: 9mm, 9.5mm and 10mm internally & externally threaded brass nuts. Used to mount movements to cases on many imported quartz movements.
Item #: 33751
Condition:
New
Price: $9.50
Description: 10mm (3/8” approx) threaded brass nuts. External and internal threads. Used to mount movements to cases on many imported quartz movements.
Item #: 33586
Condition:
New
Price: $4.00
Description: Double end wrench for 3/8" and 1/2" quartz movement mounting nuts.
Item #: 15770
Condition:
New
Price: $2.50
Description: Allows both mini quartz and snap-in movements to snap into the mounting boss so that wall clocks are evenly spaced and centered away from the wall. Perfect for wall clocks made with just a clock...More Details »
Item #: 23674
Condition:
New
Price: $2.00
Description: Fits many quartz mini movements. Measures .700" wide. 10 pcs/pack. See #33968 for large version (.840" wide)
Item #: 23870
Condition:
New
Price: $2.00
Description: Standard brass mounting nut for 8.0mm (5/16") diameter quartz movement hand shafts. 10 pieces per pack.
Item #: 23866
Condition:
New
Price: $1.25
Description: M4 thread. Fits most common mini quartz movement threaded I-shafts. Secures the minute hand to the I-shaft. 10 pack. Brass.
Item #: 23867
Condition:
New
Price: $1.25
Description: 10 piece pack. 16.0mm OD x 10.25mm ID x .52mm thick (.630" x .403" x 020").
Item #: 23862
Condition:
New
Price: $1.25
Description: 10 piece pack. 11/16" OD x 5/16" ID x .024" thixk (17.0mm x 8.25mm x 0.95mm).
Item #: 23863
Condition:
New
Price: $1.25
Description: 10 piece pack. 14.0mm OD x 8.15mm ID x 0.38mm thick (9/16" x 5/16" x 1/64" approx.).
Item #: 23861
Condition:
New
Price: $1.25
Description: 12 pieces in a pack. 2" OD x 3/8" ID x 1/8" thick (50.0mm x 9.5mm x 3.2mm).
Item #: 23828
Condition:
New
Price: $3.00
Description: M4 thread. Fits most common mini quartz movement threaded I-shafts. Secures the minute hand to the I-shaft. For decorative purposes. 10 pack. Brass.
Item #: 23868
Condition:
New
Price: $1.25
Description: Each packet contains 5 individual sets of hardware for standard quartz movements that have an 8.0mm (5/16") hand shaft. Each of the 5 packets contains one each of an M8 brass nut, a brass washer, a...More Details »
Item #: 23830
Condition:
New
Price: $3.00
Description: Standard brass mounting nut with a 1/2" across flats flange for 8.0mm (5/16") diameter quartz movement hand shafts where a larger hole needs spanning. Price is $0.75 each.
Item #: 23829
Condition:
New
Price: $0.75
Description: Double sided adhesive pad is used for mounting quartz movements. 1-7/8" square with center hole knock out.
Item #: 20325
Condition:
New
Price: $1.00
as low as: $0.85
6 or more
Description: Fits Hermle & other manufacturers mounting nuts. Made in Asia.
Item #: 20867
Condition:
New
Price: $12.50
Description: 2-3/16" x 2-3/16" x 5/8" thick with a 9/16" long handshaft. Maximum dial thickness is 3/16". Stepping sweep. Uses one "AA" battery which is not included. Includes mounting hardware. I-shaft...More Details »
Item #: 14530
Condition:
New
Price: $6.00
as low as: $5.25
12 or more
Description: 12 rubber spacers in a pack. 1" OD x .354" ID x 1/16" thick. (25.4mm x 9.0mm x 1.6mm).
Item #: 18965
Condition:
New
Price: $2.00
Items 1-19 of 19
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group