Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Description: Old West German stock marked #15 (which should be 6.00mm) is actually #14 (5.75mm) Swiss size. Regularly $3.75. While supplies last.
Item #: 02729
Condition: New
Price: $1.25
Black Spade I-Shaft Hands for Quartz with 2-7/8" Minute HandNew
For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade hands have a 2-7/8" long minute hand as measured from the center ...
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade hands have a 2-7/8" long minute hand as measured from the center...More Details »
Item #: 02735
Condition: New
Price: $0.75
as low as: $0.60
12 or more
Fancy Gold I-Shaft Hands for Quartz With 3-7/16" Minute HandNew
For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal fancy style hands have a 3-7/16" long minute hand as measured from the c...
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Gold metal fancy style hands have a 3-7/16" long minute hand as measured from the...More Details »
Item #: 02737
Condition: New
Price: $0.75
as low as: $0.60
12 or more
Kundo Style Large Anniversary Clock Foot New
25.5mm head diameter x 7/16" long. Made incorrectly with a #5-40 thread. These should have an M4 thread. Can use on many other clocks. Regularly $2.50 each. While supplies last.
Description: 25.5mm head diameter x 7/16" long. Made incorrectly with a #5-40 thread. These should have an M4 thread. Can use on many other clocks. Regularly $2.50 each. While supplies last.
Item #: 02726
Condition: New
Price: $1.00
5-1/8" Diameter Brass BezelNew
5-1/8" edge to edge diameter one piece bezel. Hinge, latch & glass tabs must be purchased separately (see Part #32969). Glass is not included. If you require convex glass, order #14065. If you req...
Description: 5-1/8" edge to edge diameter one piece bezel. Hinge, latch & glass tabs must be purchased separately (see Part #32969). Glass is not included. If you require convex glass, order #14065. If you...More Details »
Item #: 132311
Condition: New
Price: $8.50
Glass Cup Jewel For Reproduction Swinging Arm Jewel BarNew
• 2.48mm (0.0976”) outside diameter x 1.46mm (0.0575”) height glass cup jewel.
• Used on our #10817 Junghans style jewel bar.
• They can also be used in original Junghans jewel bars b...
Description: • 2.48mm (0.0976”) outside diameter x 1.46mm (0.0575”) height glass cup jewel.
• Used on our #10817 Junghans style jewel bar.
• They can also be used in original Junghans jewel bars...More Details »
Item #: 34247
Condition: New
Price: $4.00
Split End Brass Pendulum Top HookNew
Split hook end brass pendulum top hook with a tubular end accommodates a 1/8" wide quartz pendulum rod.
High quality brass bezel outside diameter measures 4-3/8". Interior plastic liner with 3 plastic pins & matching plugs for mounting. Made in Germany. Regularly $29.50. While supplies last.
Description: High quality brass bezel outside diameter measures 4-3/8". Interior plastic liner with 3 plastic pins & matching plugs for mounting. Made in Germany. Regularly $29.50. While supplies last.
Item #: 02718
Condition: New
Price: $12.50
Seth Thomas Style Pendulum Rod AssemblyNew
Oval brown lacquered wood pendulum rod is 3/4" wide x 28" long. Complete with a brass top hook, wear plate, and a rating assembly. Was $27.00. While supplies last.
Description: Oval brown lacquered wood pendulum rod is 3/4" wide x 28" long. Complete with a brass top hook, wear plate, and a rating assembly. Was $27.00. While supplies last.
20mm x 31.6mm Platform Escapement with 8-Leaf PinionNew
4-jewel pin pallet escapement runs counterclockwise. Escape wheel has counterclockwise rotation. The potence measures 12.59mm from the bottom of the plate to the bottom of the potence. Regularly $1...
Description: 4-jewel pin pallet escapement runs counterclockwise. Escape wheel has counterclockwise rotation. The potence measures 12.59mm from the bottom of the plate to the bottom of the potence. Regularly $125.00. While supplies last.
Item #: 34263
Condition: New
Price: $45.00
Black Plastic Push-On Sword HandsNew
5-9/16" minute hand as measured from center of mounting hole to tip. Minute hand has a 3.6mm square mounting hole across flats dimension. Hour hand has a 5.0mm mounting hole. Regularly $3.00. While...
Description: 5-9/16" minute hand as measured from center of mounting hole to tip. Minute hand has a 3.6mm square mounting hole across flats dimension. Hour hand has a 5.0mm mounting hole. Regularly $3.00. While supplies last.
Item #: 02717
Condition: New
Price: $0.50
Bim-Bam Chime UnitNew
This 3-rod Bim-Bam chime unit was poorly tuned during manufacture. The cast iron base measures 2-1/4" wide x 3-1/4" deep x 3-3/16" tall and is certainly usable. The 2.8mm diameter copper rods may b...
Description: This 3-rod Bim-Bam chime unit was poorly tuned during manufacture. The cast iron base measures 2-1/4" wide x 3-1/4" deep x 3-3/16" tall and is certainly usable. The 2.8mm diameter copper rods may...More Details »
Item #: 02713
Condition: New
Price: $6.00
Haller W97-740 S. Haller High Torque 400-Day Anniversary Clock Quartz MovementNew
Most current quartz rotating pendulum movement for Haller clocks produced after 1997. Measures 2-1/2" x 2-1/4" x 3/4" thick. 16mm (approx. 5/8") hand shaft length. Uses special European I-Shaft han...
Description: Most current quartz rotating pendulum movement for Haller clocks produced after 1997. Measures 2-1/2" x 2-1/4" x 3/4" thick. 16mm (approx. 5/8") hand shaft length. Uses special European I-Shaft...More Details »
Item #: 34261
Condition: New
Price: $39.50
Haller Black Spade Hands for 82mm Diameter. For S. Haller 400-Day Clock DialsNew
Oblong minute hand mounting hole measures .285" wide x .350" long. 36.5mm (approx. 1-7/16") long minute hand as measured from center of mounting hole to tip. Hour hand is 28.5mm (approx. 1-1/8") lo...
Description: Oblong minute hand mounting hole measures .285" wide x .350" long. 36.5mm (approx. 1-7/16") long minute hand as measured from center of mounting hole to tip. Hour hand is 28.5mm (approx. 1-1/8") long with a 5.0mm mounting hole.
Item #: 34255
Condition: New
Price: $4.50
Haller Black Fancy Hands for 82mm Diameter. For S. Haller 400-Day Clock DialsNew
Oblong minute hand mounting hole measures .285" wide x .350" long. 36.5mm (approx. 1-7/16") long minute hand as measured from center of mounting hole to tip. Hour hand is 28.5mm (approx. 1-1/8") lo...
Description: Oblong minute hand mounting hole measures .285" wide x .350" long. 36.5mm (approx. 1-7/16") long minute hand as measured from center of mounting hole to tip. Hour hand is 28.5mm (approx. 1-1/8") long with a 5.0mm bushed mounting hole.
Item #: 34256
Condition: New
Price: $4.50
Haller Lower Pendulum Bearing for S. Haller 400-day Anniversary ClocksNew
Brass bushing with M5 thread x 8mm long. With mounting nut. Mounts below the pendulum.
Description: Black oxide finish on steel. 10 pieces/pack. Regularly $4.00. While supplies last.
Item #: 02701
Condition: New
Price: $1.00
37-Tooth 2-Tune Music MovementNew
2-tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 36-teeth with improvement in ...
Description: 2-tune cuckoo music movement plays Edelweiss and the Happy Wanderer. 2" Shaft. Great tune clarity & overall quality. A economical alternative to the Swiss variety with 36-teeth with improvement in tonal quality.
Item #: 34232
Condition: New
Price: $73.50
Brass Lock & Key SetNew
Brass lock & key. With 2-3/16 “ tall front plate, strike plate, keyhole escutcheon, and mounting screws. Overall depth is 1-1/2”. 17/32” thick x 1-13/64” wide.
Description: New, old stock. Brass. .366” head OD with 20 teeth. .248” overall height x .135” ID. .231 shaft diameter. Regularly $6.00. While supplies last.
Item #: 02677
Condition: New
Price: $2.00
Big Ben #66 (48G) Trip WheelNew
New, old stock. .933” steel toothed wheel with brass arbor bushing. .165” overall height. Regularly $7.50. While supplies last.
Description: New, old stock. Also fits Bingo. .933” brass toothed wheel with mounting arbor. .422” overall height. Regularly $7.50. While supplies last.
Item #: 02679
Condition: New
Price: $2.50
Baby Ben Model #61 Hand SetterNew
New, old stock. Brass (plain or nickeled brass-no choice).Regularly $2.00. While supplies last.