Timesavers - Clock Repair & Replacement Parts
A huge selection of keys, pendulums, dials, hands, chain & cable, cuckoo parts, weights, verges, suspension springs, bells, gongs, movements, escapements, glass, transfers, wheels, balances, bezels, dial pans, bushings, mainsprings
Select a Sub-Category
Balances, escapements, hairsprings and escapement components
All componentry for chiming mechanisms
Buy the exact sizes you need along with all of the appropriate hardware
American made, KWM, Bergeon bushings, pivot gauges, winding arbor bushings, etc.
Large selection to accommodate every requirement
Every dial type, size and material (paper & metal). Plus dial cutters, paste, wax, numeral sets, arbors, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Flat & convex for bezels and silk-screened glass for all types of clocks
Motors, glass, hardware for these famous clocks
For every type of clock & pocket watch in every size & style
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Suspension material, suspension rods, and suspension springs of every variety for all clocks
Used to transfer designs & verbiage to glass & dials. Includes borders, numerals, minute & hour markers, pendulum openings, 2nd bits, spandrels & trademarks
Verge & wheel sets, individual verges, assortments & components for all types of clocks
Large selection of escape wheels, calendar wheels, count wheels, gears, ratchet wheels, wheel blanks, lantern pinion assemblies, fans
Clock Repair & Replacement Parts Featured Products
Description: 100 piece pack of brass Bergeon bushings from Switzerland. Size #36. Combine with other sizes for quantity discounts. 2.0mm OD x 2.0mm height x 0.50mm bore.
Item #: 28536
Condition:
New
Price: $42.50
as low as: $42.00
3 or more
Description: 100 piece pack of brass Bergeon bushings from Switzerland. Size #52. Combine with other sizes for quantity discounts. 3.5mm OD x 2.0mm height x 1.8mm bore.
Item #: 28552
Condition:
New
Price: $42.50
as low as: $42.00
3 or more
Description: American made brass bushings are 35% harder than KWM L-18 bushings and less expensive. This pack contains 50 pieces with a 2.7mm O.D. x 1.4mm height x 1.4mm bore. Combine with other 50 packs for price breaks.
Item #: 17003
Condition:
New
Price: $19.50
as low as: $19.00
12 or more
Description: American made brass bushings are 35% harder than KWM L-101 bushings and less expensive. This pack contains 50 pieces with a 2.7mm O.D. x 2.7mm height x 1.2mm bore. Combine with other 50 packs for price breaks.
Item #: 17019
Condition:
New
Price: $19.50
as low as: $19.00
12 or more
Description: American made brass bushings are 35% harder than KWM L-24 bushings and less expensive. This pack contains 50 pieces with a 3.5mm O.D. x 1.4mm height x 2.4mm bore. Combine with other 50 packs for price breaks.
Item #: 17035
Condition:
New
Price: $19.50
as low as: $19.00
12 or more
Description: American made brass bushings are 35% harder than KWM gs and less expensive. This pack contains 50 pieces with a 3.5mm Height x 3.5mm O.D. x 2.3mm bore. Combine with other 50 packs for price breaks.
Item #: 17052
Condition:
New
Price: $19.50
as low as: $19.00
12 or more
Description: American made brass bushings are 35% harder than KWM L-09 bushings and less expensive. This pack contains 50 pieces with a 1.8mm O.D. x 1.4mm height x 0.5mm bore. Combine with other 50 packs for price breaks.
Item #: 17069
Condition:
New
Price: $19.50
as low as: $19.00
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal spade style hands have a 4-9/16" long minute hand as measured from the...More Details »
Item #: 13031
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: Metric equivalent is 13.5mm wide x 0.25mm thick x 1828mm long. For Chelsea deck clocks (Chelsea #16E/#8832). Can be used on other clocks as well. See other Chelsea mainsprings: #34020, #34021, #34022, #34023, #34024, #34025, & #33499.
Item #: 17492
Condition:
New
Price: $15.00
Description: Loop end mainspring has an open loop. 3/16" x .012" x 31". Metric equivalent is 4.8mm x 0.30mm x 787mm.
Item #: 16847
Condition:
New
Price: $6.25
Description: Plain polished brass plated bobs for wood rods. 1" Rear Slot. 5-1/2 Dia. (140mm).
Fits many German & American clocks. Made in Asia. Weighs 6.2 oz
Item #: 10272
Condition:
New
Price: $20.00
Description: Black serpentine hands for Hermle mechanical movements & others have square mounting holes. The minute hand is 2-3/4" as measured from the center of the mounting hole to the tip. With 2.0mm...More Details »
Item #: 17824
Condition:
New
Price: $6.75
Description: Brass Hermle barrel with a mainspring installed. Replaces the #20 Hermle barrel. The number #21 appears on the barrel cap.
Barrel OD: 41.0mm
Tooth Plate OD: 47.50mm
Total Barrel Height: 21.0mm
Number of Teeth: 68
Item #: 14239
Condition:
New
Price: $47.50
as low as: $47.00
3 or more
Description: Brass plated steel clock chain is 70" in length, has 45 links per foot and is made of 1.30mm wire. Used on Hubert Herr 8-day cuckoo clocks.
Item #: 19622
Condition:
New
Price: $16.00
as low as: $15.75
2 or more
Description: 12 piece assortment of Horolovar temperature compensating springs. The Popular assortment has one of each thickness listed. Each spring is 5-3/8" long: .0020, .0023, .0023, .0025, .0030, .0032,...More Details »
Item #: 10425
Condition:
New
Price: $26.50
as low as: $26.00
2 or more
Description: Mini high torque quartz movement measures 2-3/16" square x 5/8" deep. 5/16" diameter hand shaft. 7/8" overall hand shaft length with a 7/16" maximum dial thickness. Rear set. Stepping sweep....More Details »
Item #: 20681
Condition:
New
Price: $5.00
as low as: $4.25
50 or more
Description: Bellows tops for 1-day cuckoo clocks. 2-1/4" x 1-1/4" (56mm x 33mm). Made in Germany. Sold in pairs. Combine with #17411 #17683, #17684 for discounts.
Item #: 10449
Condition:
New
Price: $9.50
as low as: $9.25
3 or more
Description: Bellows tops for 8-day cuckoo clocks. 2-1/4" x 1-1/4" (56mm x 33mm). Made in Germany. Sold in pairs. 8-day tops have heavier weight inserts. Combine with #17411 #10449, #17683 for discounts.
Item #: 17684
Condition:
New
Price: $9.50
as low as: $9.25
3 or more
Description: Made in Germany. Cast iron cuckoo weight weighs 1750 grams (454 grams per pound). 1-7/8" diameter x 8-1/2" long.
Item #: 13921
Condition:
New
Price: $34.50
Description: 4-1/4" tall unfinished hardwood finial. Made in Asia. Combine with others for price break.
Item #: 18330
Condition:
New
Price: $3.25
as low as: $3.00
3 or more
Description: Steel brad is 5/8" long x #18 size. 144 pieces per pack.
Item #: 10540
Condition:
New
Price: $3.00
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal serpentine style hands have a 1-3/8" long minute hand as measured from...More Details »
Item #: 13140
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.Black metal spade style hands have a 2-1/2" long minute hand as measured from the...More Details »
Item #: 17720
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: 17mm hand shaft (21/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/4". Stepping sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Item #: 20535
Condition:
New
Price: $3.50
as low as: $2.75
50 or more
Description: French black Fleur de Lys hands with a 2" long minute hand as measured from the center of the 2.0mm square mounting hole to the tip. Brass bushings on both hands.
4.50mm hole in hour hand.
Item #: 13070
Condition:
New
Price: $13.00
Description: Long drop Regulator glass is 8" wide x 14" tall x .070" thick. The image size is 4-1/2” x 2-5/8”. The Regulator design is done in gold on a clear background.
Item #: 18246
Condition:
New
Price: $12.50
Description: Unfinished cast pot metal cupid is 4-1/2" tall.
Item #: 10755
Condition:
New
Price: $16.50
as low as: $16.00
2 or more
Description: 11-5/8" outside diameter silkscreened steel dial has black Arabic numerals on a white background. There is no second bit. Used on clocks. 10-7/8" time track.
Item #: 13273
Condition:
New
Price: $24.50
Description: Black calendar hand with a 2.2mm mounting hole. 4-1/2" as measured from the center of the mounting hole to the tip. Can be trimmed to fit smaller dials.
Item #: 13010
Condition:
New
Price: $5.00
Description: Black "ST" hands have an "S" in the minute hand and a "T" in the hour hand. The minute hand is 2-5/8" long from the center of the square mounting hole to the tip. Minute hand has a 3.5mm square hole, the hour hand has a 5.0mm round bushed hole.
Item #: 13028
Condition:
New
Price: $3.50
Description: Black. With 1.6mm square hole on minute hand and 5.5mm bushing installed on the hour hand. 3-1/2" as measured from center of mounting hole to tip of minute hand.
Item #: 19576
Condition:
New
Price: $4.00
Description: Hardwood handle with brass shaft. American made.
Item #: 10026
Condition:
New
Price: $18.50
as low as: $18.00
3 or more
Description: American made double end brass key with brass plated steel wing. 3.2mm/2.0mm.
Item #: 10082
Condition:
New
Price: $3.50
as low as: $3.25
12 or more
Description: Double ended steel chuck. American made.
Item #: 10072
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: Extra large brass wing key. Perfect for the disabled or elderly.
Item #: 10179
Condition:
New
Price: $4.00
as low as: $3.75
3 or more
Description: Brass single wing trademark key.
Item #: 15500
Condition:
New
Price: $4.25
as low as: $4.00
12 or more
Description: Economical commercial grade brass key. Made in India.
Item #: 17840
Condition:
New
Price: $2.00
as low as: $1.75
12 or more
Description: 3/4" x .0175" x 96" long loop end 8-day mainspring. Made in China. Metric equivalent is 19.0mm x 0.44mm x 2438mm.
Item #: 14320
Condition:
New
Price: $16.50
as low as: $16.00
10 or more
Description: Antique gold cast kitchen clock pendulum. Comes with 6-1/4" rod and brass nut.
Item #: 10203
Condition:
New
Price: $11.50
as low as: $11.25
3 or more
Description: 1-5/8" x 3.6 ozs. Cast lead. Antique gold finish.
Item #: 10219
Condition:
New
Price: $5.75
Description: 5-1/4" edge to edge diameter one piece bezel. Hinge, latch & glass tabs must be purchased separately (see Part #32969). Glass is not included. If you require convex glass, order #14067. If you require flat glass, order #14135 to fit.
Item #: 13230
Condition:
New
Price: $17.75
Description: American made steel taper pin is 1" long and tapers from .095" to .060". 50 pieces per pack. Combine with other sizes for price breaks.
Item #: 11515
Condition:
New
Price: $6.50
as low as: $6.25
3 or more
Description: 8" square aluminum dial has a 6-1/2" time track with Roman numerals and a drilled center hole. Brass and silver color.
Item #: 13326
Condition:
New
Price: $10.00
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal tapered stick style hands have a 3-3/8" long minute hand as measured...More Details »
Item #: 13107
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: 8 - steel rod chime unit with a cast iron vertical base for westminster movements. Longest rod is 26-1/2". For #451 Westminister chime movements. Rods are mounted closer to the bottom of the mounting base.
PRESS FIT RODS
Item #: 20725
Condition:
New
Price: $54.00
Description: 10 piece pack of bronze Bergeon bushings from Switzerland. Size #13. Combine with other sizes for quantity discounts. 3.0mm OD x 1.5mm height x 1.25mm bore.
Item #: 21013
Condition:
New
Price: $6.50
as low as: $6.25
10 or more
Description: 10 piece pack of bronze Bergeon bushings from Switzerland. Size #29. Combine with other sizes for quantity discounts. 7.5mm OD x 3.0mm height x 5.0mm bore.
Item #: 21029
Condition:
New
Price: $15.50
as low as: $15.25
10 or more
Description: 10 piece pack of bronze Bergeon bushings from Switzerland. Size #45. Combine with other sizes for quantity discounts. 3.0mm OD x 2.0mm height x 1.25mm bore.
Item #: 21045
Condition:
New
Price: $7.00
as low as: $6.75
10 or more
Description: 10 piece pack of bronze Bergeon bushings from Switzerland. Size #00. Combine with other sizes for quantity discounts. 2.0mm OD x 2.8mm height x 0.3mm bore.
Item #: 21061
Condition:
New
Price: $7.00
as low as: $6.75
10 or more
Description: 100 piece pack of bronze Bergeon bushings from Switzerland. Size #15. Combine with other sizes for quantity discounts. 3.5mm OD x 1.5mm height x 1.5mm bore.
Item #: 23015
Condition:
New
Price: $38.00
as low as: $37.50
3 or more
Description: 100 piece pack of bronze Bergeon bushings from Switzerland. Size #31. Combine with other sizes for quantity discounts. 2.0mm OD x 1.5mm height x 0.30mm bore.
Item #: 23031
Condition:
New
Price: $43.50
as low as: $43.00
3 or more
Description: 100 piece pack of bronze Bergeon bushings from Switzerland. Size #48. Combine with other sizes for quantity discounts. 3.5mm OD x 2.0mm height x 1.5mm bore.
Item #: 23048
Condition:
New
Price: $43.50
as low as: $43.00
3 or more
Description: Tall case hands are heavy blued steel of the highest quality. 3.2mm round pilot hole in the hour hand. The minute hand is 5" as measured from the center of the 3.2mm square mounting hole to the tip. They can be trimmed to fit. Serpentine design.
Item #: 20781
Condition:
New
Price: $45.50
Description: Black maltese hands with 2.0mm wide oblong mounting hole in minute hand. Measures 5-9/16" from center of minute hand mounting hole to tip. 4.5mm bushed hour hand.
Item #: 23317
Condition:
New
Price: $5.25
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Fancy white and gold dial with Arabic numerals. Style #4. Uses one "AA" battery which is not included....More Details »
Item #: 20468
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: Unpolished brass shell with lead insert is used on Vienna clocks. 2" diameter x 6" long . 7.15 pounds. With top hook and bottom cap nut. Requires final polishing.
Item #: 22853
Condition:
New
Price: $52.00
Description: Time ratchet wheel for 1-day (Regula #25) cuckoo clocks. For 28.5cm (11-1/4")drop. Ratchet wheel rotation is counterclockwise (CCW) as the viewer faces the brass gear. Plastic chain guard may or may not be provided. 70 Teeth.
Item #: 20776
Condition:
New
Price: $9.00
Description: 10 piece pack of brass Bergeon bushings from Switzerland. Size #2. Combine with other sizes for quantity discounts. 2.0mm OD x 1.5mm height x 0.50mm bore.
Item #: 18502
Condition:
New
Price: $7.00
as low as: $6.75
10 or more
Description: 10 piece pack of brass Bergeon bushings from Switzerland. Size #18. Combine with other sizes for quantity discounts. 3.5mm OD x 3.0mm height x 1.75mm bore.
Item #: 18518
Condition:
New
Price: $5.50
as low as: $5.25
10 or more
Description: 10 piece pack of brass Bergeon bushings from Switzerland. Size #35. Combine with other sizes for quantity discounts. 2.0mm OD x 1.2mm height x 0.50mm bore.
Item #: 18535
Condition:
New
Price: $7.00
as low as: $6.75
10 or more
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group