Timesavers - Clearance Items

Clearance Items
Overstocks & special purchases of parts, tools, gifts, etc.

Browse Clearance Items Products

Sort
View
 
Items 181-240 of 828
Description: Brass finished aluminum with a 8mm wide rear slot. Regularly $4.50. While supplies last.
Item #: 90230
Condition: New
Price: $2.25
Qty:

Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. Nickeled steel. For short center wheel. Regularly $2.00. While supplies last.
Item #: 90196
Condition: New
Price: $0.50
Qty:

Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. Nickeled steel. For short center shaft. Regularly $2.00. While supplies last.
Item #: 90195
Condition: New
Price: $0.50
Qty:

Description: Fits 3/16” (.187") hole x 1/2” deep. Flat section is .305” wide x 7/16” long. Overall length is 15/16”. Zinc & yellow plated steel. Used on Hermle curio cabinets but can use as needed. Regularly $2.00.
Item #: 90024
Condition: New
Price: $0.50
Qty:

Description: Used on Hermle clocks, but can use as needed. Zinc plated. Regularly $2.50. While supplies last.
Item #: 90113
Condition: New
Price: $1.00
Qty:

Description: Used on Hermle clocks, but can use as needed. Zinc plated. Regularly $2.50. While supplies last.
Item #: 90114
Condition: New
Price: $1.00
Qty:

Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautifully embossed brass bob measures 10-5/8” (270mm) diameter. Straight rods. Overall length is 43”. Made in...More Details »
Item #: 90215
Condition: New
Price: $80.00
Qty:

Description: For Hermle quartz movements. Note Hermle quartz hands only fit Hermle quartz movements. Minute hand measures 120mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90158
Condition: New
Price: $1.75
Qty:

Description: For Hermle quartz movements. Note Hermle quartz hands only fit Hermle quartz movements. Minute hand measures 103mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90144
Condition: New
Price: $1.75
Qty:

Description: Measures 4” from center of oblong minute hand mounting hole to tip. Hour hand measures 2-7/8” from center of 5.0mm round mounting hole to tip. Note that Hermle quartz hands fit Hermle quartz...More Details »
Item #: 90163
Condition: New
Price: $1.75
Qty:

Description: For mechanical movements. Can use on other clocks. Measures 140mm from center of 2.25mm square minute hand mounting hole to tip. Hour hand measures 4-1/4” from center of bushed 4.5mm round hole...More Details »
Item #: 90272
Condition: New
Price: $3.75
Qty:

Description: For Hermle quartz movements. Note that Hermle quartz hands fit Hermle quartz movements only. Minute hand measures 63mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90146
Condition: New
Price: $2.25
Qty:

Description: For Hermle quartz movements. Note that Hermle quartz hands fit Hermle quartz movements only. Minute hand measures 75mm from center of oblong mounting hole to tip. Hour hand is bushed & measures...More Details »
Item #: 90165
Condition: New
Price: $2.25
Qty:

Description: Silk screened aluminum. 10mm center hole. “Hermle” logo above center hole. “Germany” indicated at dial bottom. Reg. $14.00. While supplies last.
Item #: 90092
Condition: New
Price: $7.00
Qty:

Description: 2-5/8” long nickel plated steel hinge. Used on Hermle clocks but can be used on other cabinets & doors. Regularly $7.50. While supplies last.
Item #: 90025
Condition: New
Price: $3.75
Qty:

Description: Used on Hermle clocks, but can use on anything. Plated with a dark grey finish. Regularly $2.50. While supplies last.
Item #: 90115
Condition: New
Price: $1.00
Qty:

Description: Brass finished aluminum with a 10mm wide rear slot. Used on Hermle clocks but can use on others. Regularly $4.00. While supplies last.
Item #: 90229
Condition: New
Price: $2.00
Qty:

Description: Silk screened aluminum. Ivory dial with specks of black. 10mm center hole. “Hermle” logo above center hole. “Dual Chime” below the center hole. “Germany” indicated at dial bottom. Reg. $28.00. While supplies last.
Item #: 90085
Condition: New
Price: $12.00
Qty:

Description: Use as case back on small clocks. 1/8” thick x 7-7/16” wide x 9-1/4” overall height. Black on one side, oak on the other side. Can cut to size. Used on Hermle clocks, but can use on others. Reg: $3.00. While supplies last.
Item #: 90270
Condition: New
Price: $1.50
Qty:

Description: Use as case back on small clocks. 1/8” thick x 7-7/16” wide x 9-1/4” overall height. Black on one side, dark brown on the other side. Can cut to size. Used on Hermle clocks, but can use on others. Reg: $3.00. While supplies last.
Item #: 90031
Condition: New
Price: $1.50
Qty:

Description: Solid brass column base is 1” square. Accommodates 11/16” (.687”) diameter columns. 5/16” tall. Used on Hermle clocks, but can use on others. Regularly $6.00. While supplies last. ⚠️...More Details »
Item #: 90009
Condition: New
Price: $3.00
Qty:

Description: Used on Hermle curio cabinets & other cabinetry, doors & drawers. Nickeled brass key face plate. 11/16” diameter cast zinc cylinder for up to 3/8” thick doors or drawers. 1-1/4” from center...More Details »
Item #: 90021
Condition: New
Price: $6.25
Qty:

Description: Nickeled swivel head 2.2mm wide flat blade screwdriver with knurled body. 3-3/4” long. India. Special buy. Regularly $1.00/each. While supplies last.
Item #: 02589
Condition: New
Price: $0.25
Qty:

Description: Economical concentrated water based ammoniated cleaner is formulated for ultrasonic machines, mechanical, and manual cleaning. Ideal for antique pocket watches & clocks that have protective...More Details »
Item #: 16014
Condition: New
Price: $50.00
Qty:

Description: Brass fork used on Hettich electric torsion clocks. 2.0mm Mounting Hole. 11.0mm from center of mounting hole to end. 14.0mm overall length. Germany. Regularly $8.00/ each. While supplies last....More Details »
Item #: 33721
Condition: New
Price: $2.00
Qty:

Description: Blackened. Used on many American clocks, but can use on others. Minute hand measures 5-1/8” from center of 2.5mm wide oblong mounting hole to tip. Hour hand is bushed with a 5.0mm diameter mounting hole.
Item #: 33717
Condition: New
Price: $3.25
Qty:

Description: 9-5/8" Convex clock glass. Combine with any other convex or flat glass for applicable quantity discounts.
Item #: 33713
Condition: New
Price: $6.00
Qty:

Description: Nickeled. 2-7/8” long handle. Knurled body for easy grip. 1.8mm wide x 0.8mm thick blade. Was $1.00. While supplies last.
Item #: 02273
Condition: New
Price: $0.25
Qty:

Description: 72-piece set contains a full range of buttons. Swiss quality will never tarnish or corrode. Two each (one chrome finish & one gilt finish) of 36 different sizes in a compartmentalized plastic...More Details »
Item #: 02260
Condition: New
Price: $40.00
Qty:

Description: Used on W-993. Plastic. Regularly $2.50. While supplies last.
Item #: 02235
Condition: New
Price: $1.00
Qty:

Description: Used on W-993. Brass. Regularly $1.00. While supplies last.
Item #: 02234
Condition: New
Price: $0.25
Qty:

Description: 6.35mm OD with 12 teeth x 2.40mm ID x 5.45mm long. No set screw. Can use on other movements. Regularly $6.00. While supplies last.
Item #: 02237
Condition: New
Price: $2.00
Qty:

Description: Complete with barrel. 32mm wheel diameter x 25.5mm long arbor. Regularly $28.00. While supplies last.
Item #: 02230
Condition: New
Price: $12.00
Qty:

Description: 8” x 2” x 1” silicon carbide. Use to sharpen, grind or polish. Fine on one side. Coarse on the other. China. Regularly $6.50. While supplies last. ⚠️ WARNING: This product can...More Details »
Item #: 13831
Condition: New
Price: $3.25
Qty:

Description: German made. Black metal with luminous strip. Used on European alarm & travel clocks. Minute hand measures 7/8” from the center of the 2.70mm (0.106”) mounting hole to the tip. Hour hand...More Details »
Item #: 34163
Condition: New
Price: $2.00
Qty:

Description: German made. Black metal with luminous strip. Used on European alarm & travel clocks. Minute hand measures 7/8” from the center of the 2.5mm (0.098”) mounting hole to the tip. Hour hand...More Details »
Item #: 34162
Condition: New
Price: $2.00
Qty:

Description: Elegant German made Roman numeral set has 25mm (1”) tall black numerals against a brushed brass background. Screened on 1.6mm (.0625”) thick brass. The shield measures 37mm (1.457”) tall x...More Details »
Item #: 34161
Condition: New
Price: $23.00
Qty:

Description: Brass key for #219 travel, desk & alarm models. 1.8mm right hand (clockwise) thread. While supplies last.
Item #: 02122
Condition: New
Price: $40.00
Qty:

Description: Brass key for #219 travel, desk & alarm models. 1.8mm left hand (counterclockwise) thread. While supplies last.
Item #: 02121
Condition: New
Price: $40.00
Qty:

Description: Brass key for #219 travel, desk & alarm models. 1.8mm left hand (counterclockwise) thread. While supplies last.
Item #: 02120
Condition: New
Price: $40.00
Qty:

Description: Brass key for #219 travel, desk & alarm models. 1.8mm left hand (counterclockwise) thread. While supplies last.
Item #: 02119
Condition: New
Price: $40.00
Qty:

Description: For movement #497, ref. #1472. New old stock. Original JLC material. Regularly $80.00. While supplies last.
Item #: 02117
Condition: New
Price: $25.00
Qty:

Description: For movement #812, cal. 12”, ref. #224. New old stock. Original JLC material. Regularly $80.00. While supplies last.
Item #: 02115
Condition: New
Price: $25.00
Qty:

Description: For movement #476 and #489, cal. 12”, ref. #401. New old stock. Original JLC material. Regularly $20.00. While supplies last.
Item #: 02114
Condition: New
Price: $7.50
Qty:

Description: For movement #489, cal. 12”, ref #180. New old stock. Original JLC material. Regularly $200.00. While supplies last.
Item #: 02113
Condition: New
Price: $80.00
Qty:

Description: For movement #489, cal. 12”, ref. #7498. New old stock. Original JLC material. Regularly $125.00. While supplies last.
Item #: 02112
Condition: New
Price: $40.00
Qty:

Description: For movement #476, cal. 12”, ref. #1341/1. New old stock. Original JLC material. Regularly $25.00. While supplies last.
Item #: 02110
Condition: New
Price: $25.00
Qty:

Description: For movement #476, cal. 12”, ref. #1341. New old stock. Original JLC material. Regularly $25.00. While supplies last.
Item #: 02109
Condition: New
Price: $25.00
Qty:

Description: Wood handle. 6” long. Slotted end will accommodate 5/16” (.312”) & M8 (.315”) across flats hex nuts. India.
Item #: 34158
Condition: New
Price: $3.50
Qty:

Description: 15.75mm wheel diameter x 11.7mm length. Used on Kern Standard clock. Regularly $8.00. While supplies last.
Item #: 02085
Condition: New
Price: $4.00
Qty:

Description: 12.75mm wheel diameter x 9.2mm length. Used on Kern Miniature clock. Regularly $8.00. While supplies last.
Item #: 02084
Condition: New
Price: $4.00
Qty:

Description: 16.6mm wheel diameter x 11.75mm length. Used on Kern Standard clock. Regularly $8.00. While supplies last.
Item #: 02083
Condition: New
Price: $4.00
Qty:

Description: 13.6mm wheel diameter x 8.8mm length and 32 teeth. Used on Kern Miniature clock. Regularly $8.00. While supplies last.
Item #: 02082
Condition: New
Price: $4.00
Qty:

Description: 27.7mm wheel diameter x 34.0mm arbor length. Used on Kern Standard clock. Regularly $8.00. While supplies last.
Item #: 02081
Condition: New
Price: $4.00
Qty:

Description: 20.8mm wheel diameter x 24.2mm arbor length. Used on Kern Miniature clock. Regularly $8.00. While supplies last.
Item #: 02077
Condition: New
Price: $4.00
Qty:

Description: 20.8mm wheel diameter x 24.1mm arbor length. Used on Kern Miniature clock. Regularly $8.00. While supplies last.
Item #: 02076
Condition: New
Price: $4.00
Qty:

Description: 19.5mm wheel diameter x 40.5mm arbor length. Used on Kern Miniature clock. Regularly $8.00. While supplies last.
Item #: 02073
Condition: New
Price: $4.00
Qty:

Description: 10-tooth brass pinion. 6.2mm OD x 17.5mm overall length. Used on Kern Standard clock. Regularly $6.00. While supplies last.
Item #: 02064
Condition: New
Price: $3.00
Qty:

Description: 10-tooth brass pinion. 4.75mm OD x 13.36mm overall length. Used on Kern Miniature clock. Regularly $6.00. While supplies last.
Item #: 02063
Condition: New
Price: $3.00
Qty:

Description: Looped wire. 1/2” overall length. Used on Kern Standard clock. Regularly $2.50. While supplies last.
Item #: 02067
Condition: New
Price: $1.00
Qty:

Items 181-240 of 828

Cart

Cart
Items: 0
Total: $0.00

Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by

Blacart Creative Group