Search Results
Please enter a search query below:
Browse Products
Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautifully polished brass bob measures 8-5/8” (220mm) diameter. Straight rods. Overall length is 42”. Made in...More Details »
Item #: 90225
Condition:
New
Price: $50.00
Description: Brushed silver finished aluminum. 4” time track. “Hermle” logo above 10mm center hole. “Since 1922” below center hole. “Made in Germany” at dial bottom. Used on Hermle #22926, but can...More Details »
Item #: 90059
Condition:
New
Price: $5.00
Description: 1/2” rear slot. Regularly $7.50. While supplies last.
Item #: 90255
Condition:
New
Price: $3.75
Description: Screened aluminum dial. 8-5/8” time track. “Hermle” logo above the 10mm center hole. 3–3/16” on centers between 9.5mm winding arbor holes. “Westminster” below the winding arbor center...More Details »
Item #: 90050
Condition:
New
Price: $10.00
Description: 180mm outside diameter. Arabic numerals on brushed silver chapter ring. 6” time track. “Hermle” logo above the 10mm center hole. 3–3/16” on centers between 9.5mm winding arbor holes....More Details »
Item #: 90086
Condition:
New
Price: $10.00
Description: Brass dial back with distressed white dial face. 5-7/8”time track. “Franze Hermle & Sohn-1922” above 10mm center hole. “Made in Germany” at dial bottom. Regularly $15.00. While supplies last.
Item #: 90052
Condition:
New
Price: $7.50
Description: Brass finished aluminum. 5-15/16” time track. Embossed black numerals on brushed silver chapter ring. Same as #90082 except with embossed brown & brass finished center & spandrels. “Hermle”...More Details »
Item #: 90083
Condition:
New
Price: $6.00
Description: Ornate screened brass with brass finished corner spandrels. 5” time track. Black numerals on brushed silver chapter ring. “Hermle” logo above the 10mm center hole. “Made in Germany” at...More Details »
Item #: 90337
Condition:
New
Price: $15.00
Description: For quartz movements. 70mm bob x 420 rod. Speckled antiqued brass finished bob. Split hooked rod. Regularly $7.50. While supplies last.
Item #: 90256
Condition:
New
Price: $3.75
Description: 143mm square x 197mm tall overall brushed silver finished aluminum dial. 4-5/16” brush silver time track. Center & spandrel screened gold vines and on both sides of the 1-7/16” ivory Tempus...More Details »
Item #: 90065
Condition:
New
Price: $10.00
Description: 13” outside diameter. Bright polished finish. Regularly 33.00. While supplies last.
Item #: 90340
Condition:
New
Price: $16.50
Description: 200mm x 285mm (7-13/16” wide x 11-3/16” tall) overall. Brushed brass background. Screened scrolling in center section. 4 gold toned spandrels at corners. 6-13/16” time track. Raised black...More Details »
Item #: 90341
Condition:
New
Price: $45.00
Description: For use on Hermle floor clocks with 114cm movements. Can be used on others. Beautifully polished brass bob measures 10-5/8” (270mm) diameter. Straight rods. Overall length is 43”. Made in...More Details »
Item #: 90344
Condition:
New
Price: $70.00
Description: Aluminum beat scale. White background with black details. 1" tall x 2-7/16" wide. Used on Hermle clocks and others. Regularly $5.00. While supplies last.
Item #: 199311
Condition:
New
Price: $2.50
Description: Measures 1-1/8" from center of minute mounting hole to tip. Used on quartz carriage clock movements & others.
NOTE: Hands have a minute hand mounting diameter of 1.7mm (0.067") and an hour hand...More Details »
Item #: 34193
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: 1" black stick push-on hands as measured from center of mounting hole to tip. For quartz carriage clock movements & others.
NOTE: Hands have a minute hand mounting diameter of 1.7mm (0.067") and...More Details »
Item #: 34192
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: 1-1/8" black spade push-on hands as measured from center of mounting hole to tip. For carriage clock movements.
NOTE: Hands have a minute hand mounting diameter of 1.6mm/1.7mm (0.063"/0.067")...More Details »
Item #: 34194
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: 1-1/8" black second hand for movements using push-on hands. As measured from center of mounting hole to tip. For quartz carriage clocks movement & others. .010" mounting pin diameter x .070"...More Details »
Item #: 34195
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Anti-tarnishing and corrosion inhibiting rinse for above. Imparts a transparent protective film to metal surfaces. After cleaning, rinse parts with water, then immerse in rinse for 30 seconds. Air...More Details »
Item #: 16032
Condition:
New
Price: $10.00
Description: Beautiful satin nickel finish on dial & bezel. 10-5/16” time track with 9.75mm center hole. 1-5/8” 2nd bit time track with 5.5mm center hole. 9.25mm diameter winding arbor holes on 5-11/16”...More Details »
Item #: 90047
Condition:
New
Price: $60.00
Description: Weathered gray dial printed on 20-7/8” heavy vinyl stock. Adhesive backed. 2” second bit diameter with 1-5/8” time track. 10” time track. Hermle logo. Regularly $9.00. While supplies last.
Item #: 90345
Condition:
New
Price: $4.50
Description: 2-3/16” x 9-7/16” (55mm x 240mm). Fits 60mm x 245mm & longer weight shells. Internally threaded for 5mm top hook & bottom nib, not included. Regularly $35.00. While supplies last.
⚠️...More Details »
Item #: 90320
Condition:
New
Price: $17.50
Description: 1-5/8” x 9-5/8” (42mm x 244mm). Fits 48mm x 245mm & longer weight shells. Internally threaded for 5mm top hook & bottom nib, not included. No center rod required as it is not thru drilled for a...More Details »
Item #: 90346
Condition:
New
Price: $16.00
Description: Brass winding arbor bushing measures 14.0mm head diameter x 6.0mm overall height. With an I.D. of 10.0mm and a body diameter of 12.00mm.
Item #: 18842
Condition:
New
Price: $3.50
Description: Left and right set of high quality replacement spring-loaded jaws for our #15213 drill press adapter and many KWM bushing tools with 5mm x 15mm horizontal mounting bar.
Item #: 34203
Condition:
New
Price: $108.50
Description: 3-1/16" plastic brass tone ridged bezel diameter x 2-15/16" minimum hole diameter by 1-1/4" depth below the bezel. Plastic lens. White dial with Roman numerals & an alarm function. Runs on a "AA"...More Details »
Item #: 34015
Condition:
New
Price: $8.75
as low as: $8.25
12 or more
Description: Solid oak base with groove to accommodate 3" diameter glass domes. With brass display hook for hanging pocket watches & other items. Felt pads on bottom to prevent scratching surfaces.
Item #: 34196
Condition:
New
Price: $9.50
Description: Exclusive! This dome fits the “A Type” Bulle clock and may fit many other types of clocks. 180mm outside diameter x 345mm tall x 2.00-2.25 mm thick. (7-1/16” x 13-9/16”approx.). Clock not included.
Item #: 14011
Condition:
New
Price: $80.00
Description: 11-39/64” long threaded steel rod for weight shells. M3 thread. Threaded both ends.
Item #: 02610
Condition:
New
Price: $3.00
Description: Covers the repair of popular electric clocks of the last 100 years: General Electric, Herschede & Revere clocks powered by Telechron motors, Seth Thomas clocks powered by A-300 & Sangamo motors,...More Details »
Item #: 34209
Condition:
New
Price: $31.00
Description: 1-1/4” minute hand as measured from center of .115” x .135” oblong mounting hole to tip. 7/8” long hour hand as measured from center of .192” round mounting hole to tip. While supplies last. Regularly $3.00 pair.
Item #: 02614
Condition:
New
Price: $1.00
Description: 13.8mm offset width x 38.0mm offset length with .125” diameter mounting holes. More severe bend than #90196. Nickeled steel. For center wheel. Regularly $2.00. While supplies last.
Item #: 02615
Condition:
New
Price: $0.50
Description: 19mm (3/4”) head diameter. 2.5mm (.094") head thickness. 6.65mm (.262") shaft diameter x 5.3mm (.209") shaft length. 4-piece pull comes with 2 plastic washers and an M4 mounting screw. Used on...More Details »
Item #: 90029
Condition:
New
Price: $2.00
Description: 9” overall height x 6-15/16” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle #70687 case, but can use on others. Regularly $7.50. While supplies last.
Item #: 90132
Condition:
New
Price: $3.75
Description: 8-7/8” overall height x 5-5/8” wide x .090” thick glass. Screened with a black border and gold lettering. Used on Hermle school house clocks, but can use on others. Regularly $7.50. While supplies last.
Item #: 90133
Condition:
New
Price: $3.75
Description: 6-3/16 height x 7” wide x .090” thick glass. Screened with a beautifully etched scrolled design. Pendulum opening is 3” tall x 4-13/16” width. Used on Hermle clocks, but can use on others. Regularly $13.50. While supplies last.
Item #: 90134
Condition:
New
Price: $6.25
Description: Plate measures 29.7mm x 17.7mm The potence is 6.7mm. 18,000 beats/hour. 9 jewels, 8 leaf pinion, steel escape wheel. Escape wheel has clockwise rotation. The potence measures 6.70mm from the bottom...More Details »
Item #: 34210
Condition:
New
Price: $79.50
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing right). Regularly $25.00. While supplies last.
Item #: 02618
Condition:
New
Price: $8.00
Description: Measures 41.2mm OD x 10.7mm thick (including a 13-tooth ratchet wheel with teeth facing left). Regularly $25.00. While supplies last.
Item #: 02619
Condition:
New
Price: $8.00
Description: Black hand for UW32 and others. 3/4” center to tip with a 13/32” long brass mounting shaft.
Item #: 34098
Condition:
New
Price: $5.50
Description: Black hand for UW32 and others. 3/4” center to tip with a 1/2” long brass mounting shaft.
Item #: 34099
Condition:
New
Price: $5.50
Description: Black hand for UW32 and others. 3/4” center to tip with a 15/16” long brass mounting shaft.
Item #: 34100
Condition:
New
Price: $5.50
Description: Black hand for UW32 and others. 3/4” center to tip with a 1-3/8” long brass mounting shaft.
Item #: 34101
Condition:
New
Price: $5.50
Description: Gold sweep second hand for most quartz movements measures 2-13/16" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34211
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Black sweep second hand for most quartz movements measures 3-3/16" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34212
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: Gold sweep second hand for most quartz movements measures 4-1/4" from the center of the mounting hole to the tip. Can combine with other sweep second hands for price breaks.
Item #: 34213
Condition:
New
Price: $0.50
as low as: $0.40
12 or more
Description: A slight hammer tap provides perfect alignment for straight corners. Ideal for hinge plates. 5/8” working depth. 2-3/4” x 1-1/8” x 1-1/8” aluminum base. China.
Item #: 10453
Condition:
New
Price: $8.00
Description: Externally threaded M4 top hook for weight shells.
Item #: 34215
Condition:
New
Price: $2.00
Description: 6.5mm brass end fitting. China.
Item #: 34205
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: 6.5mm brass end fitting. China.
Item #: 34206
Condition:
New
Price: $9.00
as low as: $8.75
3 or more
Description: 10-15/64" long threaded steel rod for weight shells. M3.0 thread. Threaded both ends.
Item #: 34208
Condition:
New
Price: $3.00
Description: Steel rod is not blued. Can be trimmed to any length. With 6.5mm threaded brass end fitting.
Item #: 34198
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: Steel rods are not blued. Can be trimmed to any length. With 6.5mm threaded brass end fitting.
Item #: 34199
Condition:
New
Price: $10.50
as low as: $10.25
3 or more
Description: 24-piece assortment contains 4 pieces each of popular sizes: #357, #364, #377, #386, #389 & #392.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the...More Details »
Item #: 34216
Condition:
New
Price: $3.00
Description: 8" Flat clock glass. Combine with any other convex or flat glass for applicable quantity discounts.
Item #: 34225
Condition:
New
Price: $6.75
as low as: $6.25
12 or more
Description: Good quality tempered high speed steel (HSS). 4" long. Used for cutting all types of metals, wood, bone, etc. by jewelers & watchmakers. Profile is 2.4mm tapering to 1.2mm. India.
Item #: 34069
Condition:
New
Price: $9.00
Description: Plain polished brass plated bob for wood rods were were produced incorrectly. They should have a higher convex backing to accommodate wood rods, but were manufactured with a slimmer convex backing....More Details »
Item #: 02629
Condition:
New
Price: $6.00
Description: 96 pieces per pack. Tap #6 (1.30mm). 1.80mm mounting tube diameter. 6.70mm diameter head. 1.20mm overall height (head + mounting tube). Made in Switzerland. Regularly $36.00. While supplies last.
Item #: 02632
Condition:
New
Price: $12.00
Description: Push-on hands in a spade/diamond style will fit most quartz movements requiring push-on hands. Hands & battery not included. The black minute hand measures 2-9/16" from the center of the mounting...More Details »
Item #: 34237
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: Mounts movements in brackets. M3 diameter. Fits Hermle & other movements. 20mm overall length. With 10mm of thread.
Item #: 02637
Condition:
New
Price: $2.00
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group