Description: Avoid expensive mechanical movements. Use this inexpensive drive unit for many wall clocks. Will move pendulums up to a maximum 350 grams (approx. 12 ounces) and up to 39” long. Mounts inside...More Details »
Description: Smaller movement size where available space is a factor. 2-3/16” x 2-3/16” x 5/8”.
1/2” (13mm) Hand Shaft Length & 1/8” Max Dial Thickness. Mounting hardware included. Uses I-Shaft hands...More Details »
Description: An economy version compared to Takane movements. Case measures 2-7/32” x 2-11/16” x 3/4” deep. Uses I-Shaft hands which must be ordered separately. 1/2” (13mm) Hand Shaft. 1/8” Max Dial...More Details »
Description: Striking gold plastic pendulum with crystals. Oscillates back & forth every 5 seconds. Base mounts under the clock. Not a timekeeping device. Base unit measures 2–1/4” x 2-1/8” x 5/8” deep....More Details »
Description: Striking gold plastic pendulum with crystals. Measures 3-1/8” tall x 2-3/8” diameter and mounts on the movement base center pin. Used on our Part #33786, but can be used on our #14528 or on your movement. Asia.
Description: An economy version compared to Takane movements. Case measures 2-7/32” x 2-11/16” x 3/4” deep. Uses I-Shaft hands which must be ordered separately. 21/32” (17mm) Hand Shaft. 1/4” Max Dial...More Details »
Description: An economy version compared to Takane movements. Case measures 2-7/32” x 2-11/16” x 3/4” deep. Uses I-Shaft hands which must be ordered separately. 29/32” (23mm) Hand Shaft. 3/8” Max Dial...More Details »
Description: An economy version compared to Takane movements. Case measures 2-7/32” x 2-11/16” x 3/4” deep. Uses I-Shaft hands which must be ordered separately. 1-1/16” (28mm) Hand Shaft. 3/4" Max Dial...More Details »
Description: 2-1/8” wide x 3-7/16” tall x 27/32” thick. 21/32" handshaft length. 5/16" max dial thickness. Continuous sweep second hand feature. Runs on one "AA" battery, not included No chiming...More Details »
Description: 2-1/8” wide x 3-7/16” tall x 27/32” thick. 7/16" max dial thickness. 29/32" long hand shaft. Continuous sweep second hand feature. Runs on one "AA" battery, not included No chiming feature....More Details »
Description: 2-1/8” wide x 3-7/16” tall x 27/32” thick. 3/16" max dial thickness. Continuous sweep second hand feature. Runs on one "AA" battery, not included No chiming feature. Uses standard I-shaft...More Details »
Description: 2-1/8” wide x 3-7/16” tall x 27/32” thick. 1-1/16" long hand shaft. 13/16" max dial thickness. Continuous sweep second hand feature. Runs on one "AA" battery, not included No chiming...More Details »
Description: 23mm hand shaft (29/32"). 2-3/16" square and 5/8" deep. Max dial thickness is 1/2". Stepping sweep. Complete with mounting hardware. Will not accommodate I-shaft hands. Hands and a "AA" battery...More Details »
Description: 20.0mm hand shaft (25/32" approx.). 2-7/32" x 2-7/32" x 5/8" deep snap-in movement is made in Asia. 3/8" max dial thickness. Runs on 1-AA battery. Hands & battery not included. Can combine with...More Details »
Description: 23mm hand shaft (29/32" approx.). 2-7/32" x 2-7/32" x 5/8" deep snap-in movement is made in Asia. 1/2" max dial thickness. Runs on 1-AA battery. Hands & battery not included. Can combine with...More Details »
Description: For use on quartz movements. The oblong mounting hole is .112" wide x .158" long. Black metal serpentine style hands have a 3-3/8" long minute hand as measured from the center of the mounting...More Details »
Description: Gold I-shaft hands fit most quartz movements. Measures 1-1/2" from the center of the oblong mounting hole to the tip. Can be trimmed to fit. Can combine with other hands for price breaks.
Description: Black sweep second hand for most quartz movements measures 2" from the center of the mounting hole to the tip. Can be trimmed to fit. Can combine with other sweep second hands for price breaks.
Description: Gold sweep second hand for most quartz movements measures 1-1/2" from the center of the mounting hole to the tip. Can be trimmed to fit. Can combine with other sweep second hands for price breaks.
Description: Solid brass. Minute hand measures 4” from center of mounting hole to tip. 1.75mm Pilot holes in both hands, no bushings. Regularly $15.00/pair.
Description: For use on quartz movements. The oblong mounting hole is .115" wide x .160" long. Gold metal spade style hands have a 1-15/16" long minute hand as measured from the center of the mounting hole to...More Details »
Description: No. 5 in the Clocks Magazine Beginner's Guide Series. Identifies different common pocket watches likely to be encountered by the average collector. Indicates characteristics, sizes, case styles,...More Details »
Description: Black spade hands for Hermle movements and others. With bushings. The minute hand is 3-5/8" long as measured from the center of the 2.0mm square mounting hole to the tip. 4.5mm bushed hour hand.