- Home »
- Catalog »
- Clock Repair & Replacement Parts »
- Movements, Motors, Rotors, Fit-Ups & Related »
- Electric Movements and Parts
Timesavers - Electric Movements and Parts
Replacements for Synchron, Telechron, Lanshire, etc.
Select a Sub-Category
For the original Rolling Ball Clock-Motor not available
B-type and S-type (H-type no longer available)
Electric Movements and Parts Featured Products
Items 1-23 of 23
Description: New, old stock. Regularly $30.00. While supplies last.
Item #: 02669
Condition:
New
Price: $15.00
Description: Old style 10 ft. gold rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Item #: 33752
Condition:
New
Price: $29.00
Description: Back in stock!! Replaces the field, coil & rotor assembly of many "B" type rotors. Use in timers, barographs and other commercial applications. High torque motor runs noisy and warmer. 1RPM, 60...More Details »
Item #: 20146
Condition:
New
Price: $42.00
as low as: $41.50
3 or more
Description: Small brass hand nut for Synchron Type C movements with smaller diameter hand shafts. 2.85mm inside diameter. Used on 3/4" & 7/8" long hand shafts.
Item #: 32982
Condition:
New
Price: $1.25
Description: New stock...while supplies last!! M3635: 60 cycles x 3.6RPM. Replaces: M3633, M3520. M3518, M3481, M3479, M3476, M3404, M3394, M3378, M3333, M3331, M3313, M3296, M3162. M3156, M3154 M3141, M3083, M3072 and M2492.
Item #: 14521
Condition:
New
Price: $19.50
Description: Metal back plate for Lanshire. 3 11/16" diameter. Was $2.00 now $1.00 while supplies last.
Item #: 00099
Condition:
New
Price: $1.00
Description: Plug insulator fits early 20th century style plugs. 1.055" diameter dielectric paper board.
Item #: 23090
Condition:
New
Price: $1.00
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 4.5 foot power cord. 5/8" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/4". Uses standard I-shaft...More Details »
Item #: 13262
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: 18 coils of 0.15mm diameter wire with two half end coils at right angles. These springs compensate for variations in battery voltage and temperature. They’re made from a copper-nickel (C-902)...More Details »
Item #: 23804
Condition:
New
Price: $39.50
Description: Prevents the fibre insulator from being pierced by the brass plug on Bulle pendulum rods. 8.15mm long.
Item #: 32119
Condition:
New
Price: $2.00
Description: This 0.15mm wire diameter silver plated copper spring has a 4mm end loop and 2mm diameter coils. The spring is fitted to the Bulle with one end attached to the end of the fork arbor and the other...More Details »
Item #: 23803
Condition:
New
Price: $33.50
Description: Black embossed & ribbed early American design. 1.33" diameter x .67" height. With insulator & poloarized prongs.
Item #: 30498
Condition:
New
Price: $6.00
Description: Dark brown embossed acorn & oak leaf early American design. 1.33" diameter x .67" height. With insulator & poloarized prongs.
Item #: 30497
Condition:
New
Price: $6.00
Description: Old style 10 ft. brown rayon covered parallel cord set with early ribbed style plug. Copper-capped wire tips. Plastic insulation covers stranded wire. NOT U.L. listed.
Item #: 32044
Condition:
New
Price: $29.00
Description: Antique style brown cord is perfect for replacing worn or defective cord. Sold by the foot. Please specify length desired.
Item #: 20761
Condition:
New
Price: $2.50
Description: Antique style gold cord is perfect for replacing worn or defective cord. Sold by the foot. Please specify length desired.
Item #: 20758
Condition:
New
Price: $2.50
Description: 6 foot long, 2 prong brown electric cord. 18/2 gauge wire.
Item #: 19898
Condition:
New
Price: $3.50
Description: Instructions for the Rolling Ball clock.
Item #: 16999
Condition:
New
Price: $2.00
Description: 6 foot long, 2 prong white electric cord.
Item #: 19503
Condition:
New
Price: $3.50
Description: Hansen A-43RA motor is 1 RPM and 60 cycle, 110V 3W. Includes a 10 tooth pinion. 2" diameter x 1-3/8" deep. 5.5 mm pinion diameter .
Runs clockwise.
Item #: 18404
Condition:
New
Price: $40.00
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 4.5 foot power cord. 7/8" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/2". Uses standard I-shaft...More Details »
Item #: 23550
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 4.5 foot power cord. 1-1/4" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 3/4". Uses standard I-shaft...More Details »
Item #: 23549
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 4.5 foot power cord. 17/32" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/8". Uses standard I-shaft...More Details »
Item #: 20529
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Items 1-23 of 23
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group