Timesavers » Timesaver
Timesaver Categories
A wide assortment of watch pouches, display stands, glass domes & bases, felt pads, bumpers and dots.
Locks & keys, escutcheons, eyes & hooks, latches, moldings, liners, etc.
Screws, nuts, washer, tapered pins, rivets, E-clips, nails, grommets, hooks, springs, etc.
Bluing solutions, antiquing solutions, leafing pens, Rub-N-Buff, stains, etc.
Hour & minute hands. Cast, etched or stamped. Aluminum, brass or steel. With or without mounting bushings.
2nd hand posts, hand retainers, hand protectors, bluing solution, luminous paste, etc.
Keys trademarked with manufacturers logo with correct large and small ends
Nuts, washers, hardware packs, mounting pads, adjusting wrenches, etc.
Cast, stamped, and etched hands with & without bushings
Hands that fit standard I-Shaft configured handshafts
Novelty Clock Key, Hershede & Revere Electric Chime Setting Key, Universal Key, E-Z Winder, etc.
For every type of clock & pocket watch in every size & style
Cast . For banjo clocks, endless chain clocks, Willard clocks, Zaandam clocks, and lead fillers for weight shells for all types of wall & floor clocks.
Mainsprings for every type of clock, arbors, and barrels.
Please Click Here to view our Extensive Mainspring List More Details »
Hour & minute hands. Cast, etched or stamped. Aluminum, brass or steel. With or without mounting bushings.
For American wall, kitchen & mantel clocks, cuckoos, Hermle, Junghans, musical, novelty clocks, regulators, etc.
Uses push-on hands. No mounting threads
Hour & minute hands. Cast, etched or stamped. Aluminum, brass or steel. With or without mounting bushings.
Mechanical, electric, and quartz (battery-run) movements and parts for every application
Timesaver Products
Description: Minute hand is 3-1/2" long as measured from the center hole to the tip. Steel hands with pilot holes: 1.6mm in minute hand and 3.0mm in hour hand.
Item #: 23322
Condition:
New
Price: $13.00
Description: Black. With round pilot hole in the hour hand and 2 bushings (4.4mm and 5.5mm) one of which must be installed. 1-9/16" as measured from center of mounting hole to tip of 1.25mm square hole minute hand. 3.2mm round hole in hour hand.
Item #: 23383
Condition:
New
Price: $4.00
Description: Black. With 2.5mm square hole on minute hand and 5.5mm bushing installed on the hour hand. 2-1/8" as measured from center of mounting hole to tip of minute hand.
Item #: 23384
Condition:
New
Price: $4.00
Description: Black. With 2.5mm square hole on minute hand and 5.5mm bushing installed on the hour hand. 2-5/16" as measured from center of mounting hole to tip of minute hand.
Item #: 23385
Condition:
New
Price: $4.00
Description: The size listed is the length of the minute hand from the center of the 1.8mm wide oblong mounting hole to the tip of the minute hand. 4.75mm hour hand mounting hole. With two bushings (4.0mm and...More Details »
Item #: 23387
Condition:
New
Price: $5.00
Description: The size listed is the length of the minute hand from the center of the 1.8mm wide oblong mounting hole to the tip of the minute hand. 4.75mm hour hand mounting hole. With two bushings(4.0mm and...More Details »
Item #: 23388
Condition:
New
Price: $5.50
Description: Used on Seth Thomas Fashion clocks. 3-5/8" as measured from center of 2.4mm square mounting hole to tip of minute hand. 5.5mm round hole in hour hand. With 2 bushings provided, one of which must be installed. Black.
Item #: 23391
Condition:
New
Price: $10.50
Description: Black. With 2.5mm square hole on minute hand and 5.5mm bushing installed on the hour hand. 1-3/4" as measured from center of mounting hole to tip of minute hand.
Item #: 23602
Condition:
New
Price: $4.00
Description: Unfinished spade I-shaft hands. Measures 15-1/4" from center of mounting hole to tip of minute hand. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Use with high torque quartz movements
Item #: 20259
Condition:
New
Price: $13.00
Description: Black spade style I-shaft hand is 10" long as measured from the center of the mounting hole to the tip. Use with high torque quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.
Item #: 20684
Condition:
New
Price: $7.00
Description: Black spade style I-shaft hand is 12" long as measured from the center of the mounting hole to the tip. Use with high torque quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.
Item #: 20685
Condition:
New
Price: $8.50
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal wavy style hands have a 1-1/2" long minute hand as measured from the...More Details »
Item #: 23526
Condition:
New
Price: $0.75
as low as: $0.60
12 or more
Description: For use on quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”. Black metal fancy hands have a 8" long minute hand as measured from the center of the mounting hole to the tip.
Item #: 23528
Condition:
New
Price: $2.50
Description: Black spade style I-shaft hand is 9-5/16" long as measured from the center of the mounting hole to the tip. Use with high torque quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.
Item #: 23547
Condition:
New
Price: $4.50
Description: Black spade style I-shaft hand is 12" long as measured from the center of the mounting hole to the tip. Use with high torque quartz movements. Minute hand hole is .112” wide x .158” long. Hour hand hole diameter is .198”.
Item #: 23548
Condition:
New
Price: $7.00
Description: Double ended steel chuck. American made.
Item #: 20371
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: Double ended steel chuck. American made.
Item #: 20392
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: Double ended steel chuck. American made.
Item #: 20410
Condition:
New
Price: $8.50
as low as: $8.25
3 or more
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 4.5 foot power cord. 1-1/4" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 3/4". Uses standard I-shaft...More Details »
Item #: 23549
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: 2-1/8" x 2-1/8" x 5/8" thick rear set electric movement with a 4.5 foot power cord. 7/8" handshaft length with a 5/16" handshaft diameter. Maximum dial thickness of 1/2". Uses standard I-shaft...More Details »
Item #: 23550
Condition:
New
Price: $23.00
as low as: $22.50
3 or more
Description: Made in Germany. Regula 25, 1-day movement includes chains, hooks rings, hand nut and hand bushing. Weights, pendulum and bellows are not included and must be purchased separately. 1 1/8" Hand...More Details »
Item #: 23508
Condition:
New
Price: $75.00
as low as: $74.50
3 or more
Description: Made in Germany. Regula 34, 8-day movement includes chains, hooks rings, hand nut and hand bushing. Weights, pendulum and bellows are not included and must be purchased separately. The Regula 34...More Details »
Item #: 23509
Condition:
New
Price: $119.50
as low as: $119.00
3 or more
Description: Made in Germany. Regula 34, 8-day movement includes chains, hooks rings, hand nut and hand bushing. Weights, pendulum and bellows are not included and must be purchased separately. The Regula 34...More Details »
Item #: 23510
Condition:
New
Price: $119.50
as low as: $119.00
3 or more
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Plain gold dial with Arabic numerals. Style #1. Uses one "AA" battery which is not included. Can combine...More Details »
Item #: 20466
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 3-17/32" brass bezel diameter x 3" minimum hole diameter x 9/16" depth below the bezel. Fancy white and gold dial with Arabic numerals. Style #4. Uses one "AA" battery which is not included....More Details »
Item #: 20468
Condition:
New
Price: $9.00
as low as: $8.50
12 or more
Description: 9mm hand shaft (11/32" approx.). 2-7/32" x 2-7/32" x 5/8" deep snap-in movement is made in Asia. 1/16" max dial thickness. Runs on 1-AA battery. Hands & battery not included. Can combine with...More Details »
Item #: 22884
Condition:
New
Price: $3.50
as low as: $2.75
50 or more
Description: 14.5mm hand shaft (9/16" approx.). 2-7/32" x 2-7/32" x 5/8" deep snap-in movement is made in Asia. 3/16" max dial thickness. Runs on 1-AA battery. Hands & battery not included. Can combine with...More Details »
Item #: 22886
Condition:
New
Price: $3.50
as low as: $2.75
50 or more
Description: Brass covered 3-1/8" bob. 7" long wood rod with top hook & rating assembly.
Item #: 22715
Condition:
New
Price: $9.50
Description: Set of 5. 4 pieces are .0625" wide and 1 piece is .125" wide. .007" thick. 1" length.
Item #: 23410
Condition:
New
Price: $6.00
Description: Used on Tall Case clocks. 4.0mm x 12 foot roll.
Item #: 23500
Condition:
New
Price: $20.00
Description: Weight hook repair kit comes with a 1-1/2" diameter brass end cap, a brass weight hook with a screw and washer, and an octagonal aluminum insert. Just drill a 5/16" hole in the end of a lead...More Details »
Item #: 20750
Condition:
New
Price: $6.00
Description: Unpolished brass shell with lead insert is used on Vienna clocks. 2" diameter x 6" long . 7.15 pounds. With top hook and bottom cap nut. Requires final polishing.
⚠️ WARNING: This product...More Details »
Item #: 22853
Condition:
New
Price: $52.00
Description: 38.0mm diameter fits 40mm diameter weight shell. 3/4" height. 1/2 pound.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 23576
Condition:
New
Price: $8.50
Description: 41.4mm diameter fits 45mm diameter weight shell. 5/8" height. 1/2 pound.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 23577
Condition:
New
Price: $8.50
Description: 48.4mm diameter fits 50mm diameter weight shell. 1/2" height. 1/2 pound.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 23578
Condition:
New
Price: $8.50
Description: 54.0mm diameter fits 60mm diameter weight shell. 3/8" height. 1/2 pound.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to...More Details »
Item #: 23579
Condition:
New
Price: $8.50
Description: Cast lead Willard style weight is 7 pounds. 6-5/8" long x 2-1/4" wide x 1-1/2" deep. With top hook.
⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the...More Details »
Item #: 23609
Condition:
New
Price: $46.50
Description: Time ratchet wheel for 1-day (Regula #25) cuckoo clocks. For 23.5cm (9-1/4")drop. Ratchet wheel rotation is counterclockwise (CCW) as the viewer faces the brass gear. Plastic chain guard may or may not be provided. 58 Teeth.
Item #: 20775
Condition:
New
Price: $9.00
Description: Time ratchet wheel for 1-day (Regula #25) cuckoo clocks. For 28.5cm (11-1/4")drop. Ratchet wheel rotation is counterclockwise (CCW) as the viewer faces the brass gear. Plastic chain guard may or may not be provided. 70 Teeth.
Item #: 20776
Condition:
New
Price: $9.00
Description: Strike ratchet wheel for 8-day (Regula #34) cuckoo clocks. Ratchet wheel rotation is counterclockwise (CCW) as the viewer faces the brass gear.
Item #: 20778
Condition:
New
Price: $11.00
Description: Brass cuckoo wheel with steel cut pinion. For 8-Day cuckoo movements with dancers.
Item #: 20773
Condition:
New
Price: $4.50
Description: 5/8" diameter black rubber bumper is 3/8" tall. Nail is included.
Item #: 20096
Condition:
New
Price: $0.75
Description: Wood test stand is perfect for testing grandfather, grandmother and most movements on seatboards. 44-1/2 inches tall x 14-1/2 inches wide. Will accommodate pendulum drops up to 47 inches. All holes...More Details »
Item #: 23554
Condition:
New
Price: $112.50
Description: Assists you in making adjustments to strap type verges. Includes operating instructions.
Item #: 22941
Condition:
New
Price: $72.00
Description: Used to grip the crowns of smaller mens' watches for winding. Nickel plated. See #33195 for smaller 4mm size model for ladies' watches. India.
Item #: 23455
Condition:
New
Price: $6.50
SHOP SAFELY - All Transactions on Timesavers.com are
Protected By Comodo's Site Security Encryption Process
Copyright © 2012 Timesavers. All Rights Reserved. Site Developed by
Blacart Creative Group