Seiko Dual Chime Pendulum Movement - 28mm Handshaft

3-1/4" x 4-1/2" x 1-5/16" thick with a 1-1/8" long handshaft. Maximum dial thickness is 5/8". Runs on one "C" battery which is not included. Westminster/Whittington chimes the 1/4" and strikes the correct hour. I-shaft hands are not included and must be ordered separately. With a detachable speaker with 10" long wires. Has night shut-off and volume control. Rear set. Hardware includes brass washer, hex nut, and open nut. Can combine with Part#14580 for price breaks. Asia.

PLEASE NOTE: Move the night chime selector switch to left most position. Moving clockwise direction, use the rear-mounted hand set to advance the hands until they reach the current time. BE SURE TO STOP AT EACH HOUR TO LET CHIME & HOUR COUNT PLAY COMPLETELY BEFORE GOING ON TO THE NEXT HOUR! Failure to stop at each hour may cause the chime to be out of sequence. Let the clock run for at least one full hour so the chime can fully reset.

IMPORTANT!! EFFECTIVE 06/05/14, THIS MOVEMENT WILL NOT COME WITH A PENDULUM ROD & BOB WHICH MUST BE ORDERED SEPARATELY!!!!!